Casting fishing rods are distinguished by the presence of a special protrusion for holding it with the index finger - the “trigger”. They are used mainly with baitcasting reels. They are made of carbon fiber, fiberglass, treated with polyester oils.
But their main feature is the presence of access rings located on top. Baitcasting ones have a reduced diameter and a low stem. This increases the sensitivity of the gear.
With their help, you can cast the equipment far and sensitively control its flight. They provide a strong and fast hook. Withstand heavy loads.
For the most part, casting rods are made on spinning forms. Available classes:
- light medium – maximum test 16 g;
- medium – test up to 21 g;
- medium heavy – up to 28 g;
- heavy – up to 42
Choosing a casting rod
What is a casting rod used for? Typically for jigging and twitching. Therefore, we will take a comprehensive look at how to make the right choice of casting spinning rod for these types of fishing.
Casting for jig
Jig is one of the popular types of spinning fishing. This fishing is quite fruitful. The richest catch can be obtained in the cold season, but in other seasons the result will be in any case. A good spinning rod for jig fishing has a high-speed reaction when biting and allows you to clearly determine the moment of hooking. Allows you to cast long distances from the shore without losing the quality of the hook.
When buying a casting spinning rod for jigging, you should be guided either by the type of fishing you are going to do, or by your most favorite method:
- fishing from a boat;
- fishing from the shore;
- fishing in the depths;
- shallow water fishing.
Models of jig sticks differ in many ways:
- Rod length. Very long rods will not be able to fulfill their primary function; lengths up to 3 meters are considered optimal.
- Material for production. Since in order to perform all its functions, the jig must be light in weight, the best material for its manufacture is carbon fiber or composite. The light weight of the rod is the most convenient option for jigging from a boat.
- The test is the ability to cast a certain type of bait. With such rods, the most effective will be blanks from 12 to 38 grams.
- Action – flexible design of the rod. The body of the rod should transfer the bite directly to the hands, for this the rod should be as elastic as possible.
- Coil used. Both inertial and non-inertial coils are suitable. Inertial coils have a simple design and do not cause difficulties in use. Good inertia-free reels instantly stop the reverse motion of the fishing line, have a larger spool, and the spool and roller material are made only from high-quality material. Modern inertial reels - multipliers - have a high speed of winding the line and allow you to feel the bite with your fingers, and not only based on visual perception.
Photo 2. Casting spinning rod for ultralight jig.
Advice! A casting rod for jig gives good results, but the first time you use it, you need to find the right approach.
Twitching rod
Twitching is fishing, the purpose of which is to catch predatory fish: pike, perch or any other representatives of predators. A casting rod for twitching is designed for fishing with plastic baits that imitate real small prey for predators; the special design of the spinning rod brings these dummies to life. Plastic baits move at different speeds and in different directions with a rapid rate of change.
A casting spinning rod for twitching should provide:
- the maximum trajectory of the bait in the water and the speed of its movement;
- immersing the wobbler to the maximum of its capabilities;
- correspondence of gear and bait in weight and size;
- correspondence of the bait to the speed of the current of the reservoir.
A casting rod purchased for twitching should be carefully inspected before purchase and make sure there are no cracks or chips. Otherwise, the damaged tackle will not last long.
The following components can demonstrate such characteristics:
- Casting light fishing rod from 2 to 2.5 meters.
- Spinning reel up to 2000 sizes.
- The fishing line should have increased strength; braid is best.
- When purchasing a spinning rod for twitching, you should carefully check all the rings; under no circumstances should their integrity be compromised.
How to choose a spinning rod for catching pike perch
The success of pike perch fishing depends on many natural factors. The activity of pike perch depends on pressure, wind direction, time of day, temperature, water transparency, etc. Often fishermen pay the most attention to these moments, while forgetting about the other side, namely the choice of spinning rod and lures. Let us note that even if the conditions are favorable, and the gear and bait are chosen incorrectly, you should not count on a good catch.
Criteria for choosing a spinning rod
The popularity of models is not only a well-known global brand, but a whole complex of indicators and characteristics. Before purchasing, it is advisable to decide: who you plan to fish for, how strong the current is, and the features of the bottom. Average cost of the desired purchase.
The main aspects of attention include: rod length, test, action, handle length, tip type
You also need to pay attention to the line test and the guide rings. The material used can play a decisive role in your purchase.
Length
It seems that here you have to choose, the longer the better, but let me disagree. Length will add weight, which will ultimately affect the spinner’s endurance. In addition, sensitivity to determining the moment of the beginning of a bite will decrease.
The optimal length of the blank is considered to be in the range from 2.2 m to 2.7 m. This rod can be used to cast from the shore. For a boat, you need to choose a shorter one, because it is possible to swim to the desired place.
Test
An important parameter that determines the minimum and maximum weight of baits used on this spinning rod. The test form is marked in grams. The first number indicates the weight of the bait, at which the fisherman begins to feel its movement along the bottom. The second indicator limits the load that the rod can withstand.
Some manufacturers indicate markings in ounces. Spinning rod classes depending on the test are shown in the table:
| Class | Lure weight in grams |
| Lightest (ultralight) | to 10 |
| Light (light) | up to 20 |
| Average (medium) | up to 40 |
| Heavy (heavy) | up to 100 |
| Super heavy (extra heavy) | up to 120 |
Build
The parameter determines the rigidity of the rod, its ability to bend under weight.
For jigging, fast and super-fast action is recommended. It is enough to place the spinning rod in a vertical position and shake it vigorously. In this case, only the tip should vibrate, otherwise the sensitive middle part and the blank will transmit parasitic hand vibrations or line pressure to the tip, which will scare away the fish.
Handle length
The handle should be long. This will allow you to cast long distances by holding the rod with both hands. According to the type of execution, there are spaced and solid ones. Most modern gear has a spaced version.
The following materials are used in production: cork, polymers. Any of the presented options has its advantages and disadvantages. Everything is selected individually.
But not only the length of the handle is a significant indicator. Often you have to replace “attachments”: reels or spools, or vice versa, the spinning rod changes. In this case, the old proven balance of the entire fishing gear is thrown off. To restore it, the handle has a finishing mechanism in the form of plugs or a weighting agent.
Top type
The difference between a spinning rod and a float rod is the tip. An ordinary “cane” is made of one material, that is, it is solid. This type is called tubular. For a jig, you need a glued tip made of another component; this type of execution is called solid. For comfortable observation of the tip, signal marks are often applied to it.
Line test
After determining the weight indicators of the baits, it is necessary to clarify which fishing line will be most effective. Testing is used for this. A string that is too thick can support a trophy, but its weight will break the spinning rod, and vice versa, a thin cord will break under the weight of the bait during casting.
Passing rings
Despite the simplicity of the detail, its significance is important in the arrangement of equipment. Correct placement on the rod allows you to evenly distribute the load along the entire length
Requirements for rings:
- Strength and lightness.
- Bending resistance.
- The inner surface must be free of chips and cracks.
- Anti-corrosion design.
Material of manufacture
Modern equipment is made of three main components:
- Fiberglass. It is found in budget segments, so it is ideal for beginners, but is considered a “heavyweight” among competitors. In addition, it does not sufficiently convey the subtleties of the bite.
- Composite Carbon fiber reinforced with fiberglass. Gives the equipment strength and the ability to withstand weight overloads, but at the same time does not reduce sensitivity. Good combination of price and quality.
- Carbon. Three components are proportionally combined: graphite, carbon fiber, carbon fiber. Mandatory execution of expensive, branded samples.
After understanding all the “wants”, the question arises - which company’s equipment is better to buy, what models are popular, I would like from the best manufacturers and at the same time inexpensive. The products of the following companies are popular:
Rating of the best spinning rods 2021
- 5 – Shimano Game AR-C
- 4 – Graphiteleader VIVO
- 3 – KOSADAKA Mustang
- 2 – Major Craft RIZER
- 1 – Pontoon-21 GAD HARRIER
- 5 – Norstream Rebel RBS-732MMH
- 4 – Black Hole Pro Team 742ML
- 3 – Major Craft RESTIVE RTS-802L
- 2 – FAVORITE Exclusive Twitch Special EXST-662M
- 1 – Norstream Provokator PRS-622L
- 5 – Salmo TIOGA 2.37 m U-Light (TSTI6-792F)
- 4 – Shimano Catana EX Spinning 210UL
- 3 – Maximus Egoist-Z 662UL 2.0m / 1-7g
- 2 – Graphiteleader Corto EX GOCXS-792UL-T
- 1 – Kosadaka Lighting 210UL
- 3 – Maximus Work Horse X
- 2 – Shimano Catana BX
- 1 – Black Hole River Hunter
As the proverb says: “You can’t pull a fish out of a pond without effort.” Spinning is one of the gears that makes the work of fishermen easier. The peculiarity of spinning fishing is a game in which feedback between the catcher, bait and predator is important, so the rods are not as simple as it seems at first glance.
When choosing a spinning rod, you should take into account the body of water, the target fish, the fishing style, and the availability of watercraft. A one and a half meter UL spinning rod will fit in a backpack, but without a boat, only a shore goby will be caught on a micro jig.
The usual length of a spinning rod is between 1.5 and 3.3 meters. A huge stick is good for long casting (up to 100 m), but there is a risk of getting tangled in the line and not being able to cope with strong fish.
For transportation, the rods are folded like an antenna or disassembled into separate arms. A telescopic spinning rod should be purchased only for the occasion; a real sports angler buys only a plug-in tool.
The most important parameter is called the “rod test”, measured in grams, and determines the minimum and maximum weight of the bait that the stick will cast without breaking. Experts distinguish four classes:
- Ultra-light (test up to 6 g) - light and thin fishing rods with which you can perfectly fish jigs, including farmed trout, once you go ashore.
- Light (test 7 - 15 g) - more durable rods for the shore or boat. Using a wobbler in a shallow lake is good for catching young perch (up to 3 kg) or small chub.
- Middle class (test 15 - 40 g) - will allow you to defeat a pike perch weighing 10 kg in a fair fight.
- Heavy class (test over 40 g) - designed for catching large predators such as strong pike.
Another characteristic is structure, which determines flexibility. A slow action rod bends completely, while a fast action rod bends only the tip. The feedback in the hand depends on the action - the stiffer the better, but it is more difficult to play with the bait.
What is casting spinning
The design of the spinning rod itself has not changed for two hundred years. The principles on which this gear was built turned out to be correct. The rod used for spinning is not quite ordinary. This is not a long whip, which is typical for other gear. Its average length is two meters, and sometimes shorter. All equipment ends with a strong fishing line with a leash and artificial bait.
While the basic components of spinning gear remain unchanged, industry and fishermen are developing new types of it. One of the newest developments is the casting rod. It is becoming increasingly popular. Especially suitable for trolling. To use a casting rod, you need to know its features.
Also, casting spinning rods have smaller guide rings and are located on top of the rod blank on reinforced legs. They are special tackles because these rods define the casting technique itself.
Design features of the gear
Casting spinning rod for twitching or jig fishing includes the following elements:
- A durable fishing rod with increased sensitivity, low weight and a length suitable for specific conditions. This form includes: a fishing rod, a reel holder, a handle, and guide rings. As for the type of such rods, they can be plug-in or telescopic. Experienced fishermen prefer the first type, because the second has many advantages.
- A baitcasting reel capable of fighting the heaviest fish, weighing up to 60 kg, while remaining sensitive, multifunctional and versatile regarding the bait used.
A distinctive feature of such products is the absence of twisting of the fishing line when winding on a reel. With its help, you can make long casts with almost any thickness of thread. Narrow-profile and wide-profile models are available for sale. The first option is suitable for baits weighing 10-20 grams, and the second - for heavy ones that weigh from 40 grams. In addition, there are devices that are designed only for jerkbaits, heavy jig baits and large wobblers, and reels used for sea fishing with heavier products.
- Fishing line. As a working line for this gear, it is advisable to use a special cord, which demonstrates maximum resistance to prolonged use and maximum loads. Such cords are quite rigid and practical to use.
Form performance characteristics
To make the right decision and choose a quality model, it is important to carefully study a number of features:
Material of manufacture. Modern companies that produce casting rods use several materials for their manufacture. Among them: fiberglass, carbon, graphite and synthetic fibers. Fiberglass models are characterized by great strength and flexibility, but their weight remains impressive. Carbon products are resistant to increased loads and have a high degree of resistance. The advantage of graphite is maximum hardness and rigidity, which has a positive effect on strength properties.
Build. Casting fishing rods can have different structures. There are models with parabolic and semi-parabolic action, as well as options that bend at the top and bottom. For a beginner, it is advisable to use the first two types. Test range. Fishing rods can have different test loads and are divided into several classes: heavy casting - suitable for 40 gram baits, heavy medium - for baits up to 27 grams, medium casting - up to 21 grams, light medium - up to 20 grams. Passing rings
It is important to note that the rings on casting rods differ from others in their small diameter and low stem. Rings on casting rods
Important rod parameters
As for the optimal rod length, it is chosen taking into account the fishing conditions and fishing method. In this case, you should adhere to the following recommendations:
- When catching predatory fish from a boat or when casting along the coastline, you should use short fishing rods, the length of which is 180-200 centimeters. They allow you to successfully monitor the behavior of the nozzle in a specific water area and demonstrate maximum sensitivity.
- For boat and shore fishing, regardless of the type and nature of the reservoir, fishing rods with a medium length are suitable. They are considered a versatile and convenient tool that is ideal for beginners who have no experience in handling casting gear.
- Models with a length of 2.2-2.9 meters are suitable for fishing from banks and bridges. The use of long poles makes it possible to make long casts and fish large areas of water.
It is also important to take into account such a parameter as the power of the casting form
- If you are going to fish with baits that weigh up to 20 grams, then light models equipped with a thread with a permissible load of up to ten kilograms are perfect.
- If products weighing up to 50 grams are used as bait, then it is advisable to take a middle-class form, which is equipped with a fishing line with a permissible load of up to 15 kilograms.
- And if we are talking about catching larger prey, for example, sea fish, using heavy baits, then it is better to find a heavy tool, and use a thick thread with a load of up to 22 kg as a working line.
The best telescopic spinning rods
The design of spinning rods of this type is most common among both experienced fishermen and beginners. Telescopic spinning rods are distinguished by ease of transportation, compactness and versatility.
Maximus Stealth-X Tele MTESSX25M
4.8
★★★★★ editorial assessment
89% of buyers recommend this product
See review
Careful joining of sections and the graphite base of the model provide it with less weight and strength, which is not inferior to its solid counterparts. The tip of the spinning rod reacts sensitively to line vibrations and promptly reports a bite.
The length of the rod is 2.5 meters, test 7-35 g. The tackle has a spaced combined handle for better grip and a sensitive reel holder. A thick case guarantees convenience and safety in transporting and storing the spinning rod.
Advantages:
- light weight;
- long rod;
- comfortable to hold;
- a large number of sections.
Flaws:
still a bit heavy.
Maximus Stealth-X Tele is used for catching large deep-sea fish. The bait can be cast over a long distance both from a boat and from the shore.
Atemi Superlight HMC 8.0m
4.8
★★★★★ editorial assessment
88% of buyers recommend this product
The main feature of the model is the large number of sections - 8 pieces. This allows you to fine-tune your casting blank. Thanks to the length of 800 centimeters, the rod can be used when fishing at great depths while on the shore.
The bait test is 2-10 grams, the action type is medium. The tackle is made of elastic graphite, the versatility and flexibility of which guarantee convenient hooking and fishing for heavy fish.
Advantages:
- long rod;
- convenient setup;
- strength;
- long casting range.
Flaws:
weight 525 g.
Atemi Superlight is worth purchasing for catching small fish at great depths. An excellent solution for lake fishing.
Salmo Elite Travel Spin 20 213
4.7
★★★★★ editorial assessment
86% of buyers recommend this product
The model is made from high-modulus graphite. It is resistant to high loads and does not lose shape with frequent bending. This ensures that the rod remains strong throughout its entire lifespan.
A large number of rings prevents tangling when using fishing line or braided cords. The maximum rod length is 213 centimeters. The bait test from 3 to 20 grams allows you to successfully catch large-sized fish.
Advantages:
- long rod;
- ease of transportation;
- anti-wrap rings;
- high strength.
Flaws:
low sensitivity.
Travel Spin has a long casting range and is suitable for fishing techniques such as twitching or jigging.
Volzhanka “Volgar” 1.8 m 5-30 g
4.7
★★★★★ editorial assessment
85% of buyers recommend this product
The main feature of the spinning rod is its high reliability. It is made of high modulus fiberglass and features salt water resistant bonding elements.
The maximum rod length is 180 cm, bait test 5-30 grams. The presence of five telescopic sections allows you to adjust the gear most accurately, based on the current needs of the owner.
Advantages:
- durable fishing rod;
- wear-resistant handles;
- light weight;
- low price.
Flaws:
lack of flexibility.
Volzhanka "Volgar" will be an excellent purchase for sea fishing. Convenient length adjustment and large permissible weight of the bait allow you to effectively use the spinning rod at great depths.
Kosadaka Voyager Tele 300 M
4.7
★★★★★ editorial assessment
87% of buyers recommend this product
The model has a short transport length and lightweight fittings, which allows you to place the spinning rod in the trunk of a car or a travel backpack. The tackle is distinguished by excellent balancing, which promotes uniform distribution of the load over the form.
The maximum rod length is 3 meters, test 10-30 grams. This allows you to cast bait over a distance of more than 100 meters to catch large specimens. High sensitivity guarantees a timely response to catching fish.
Advantages:
- convenient transportation;
- perfect balance;
- elasticity;
- light weight;
- affordable price.
Flaws:
instability to impacts.
Kosadaka Voyager Tele will be useful when used on any type of reservoir; it is recommended for fishing from the shore. An excellent assistant on a country trip or hike.
Rating of the best spinning rods for jigging
| Nomination | place | Name of product | price |
| The best budget spinning rods for jigging up to 4000 rubles | 1 | Maximus WorkHorse-X 18L | 1 990 ₽ |
| 2 | Kosadaka Mustang 210ML | 3 862 ₽ | |
| 3 | STINGER ENFORCER JIGGER 802ML 5-24 | 1 838 ₽ | |
| The best jig spinning rods in terms of price-quality ratio | 1 | ST.CROIX LEGEND XTREME LXS76MLXF2 | 29 485 |
| 2 | Norstream Kando 902MH | 15 320 ₽ | |
| 3 | Banax Thunder 90MXF2 | 3 100 ₽ | |
| 4 | GAD Harrier 702MHF | 5 330 ₽ | |
| 5 | Pontoon21 Psychogun 912MMHSF | 10 890 ₽ | |
| 6 | Maximus Marauder 66ML | 9 420 ₽ | |
| The best spinning rod for microjig | 1 | Aiko Jannjeta 662ULT | 7 210 ₽ |
| 2 | Major Craft Trapara 562UL | 3 780 ₽ | |
| The best spinning rod for heavy jigs | 1 | SHIMANO YASEI AX SPG SHAD JIGGING XH | 13 020 ₽ |
Subtleties of choosing a jig tool
Currently, there are two main types of casting spinning rods, which differ in purpose and wiring method:
- For jig fishing.
- For twitching fishing.
If we are talking about buying your first tool for jig fishing, you need to at least understand what the intricacies of this method of fishing are. It's no secret that when fishing with a jig, a baited artificial fish moves freely along a given path and performs all sorts of maneuvers. The wiring itself is carried out at the very bottom. During the fishing process, the angler watches the moving whip and independently changes the tension of the thread.
To buy a high-quality spinning blank, you need to make sure that it meets the following requirements:
- Instantly reacts to a bite.
- Allows you to easily and safely control the bite.
- Delivers equipment over long distances.
- Capable of making quick cuts.
The ideal casting spinning rod for jig looks like this:
- The optimal length of the form is 2.5−2.8 meters.
- Manufacturing material: carbon fiber.
- Build - fast or medium-fast.
Spinning rod weight
- What is this. Weight of spinning rod without reel, cord and bait.
- What is it measured in? In grams.
- Which to choose. Microjig is working with light bait weights, thin lines, and small reels. All this means that the weight of the spinning rod must match the rest of the equipment. In practice, a spinning rod for microjig fishing rarely weighs more than 120-130 grams. There is no ideal value here. As experienced ultralight lovers say, the lighter the better.
Selection of casting spinning rod by type of fish
Cautious and strong predators of Russian water bodies are desirable prey for fishermen. Fishing with a casting spinning rod is aimed at carnivores. You can fish with universal tools. But each individual has its own character and habits, so it is better to choose specific gear for each specific fish.
Pike
Half of the success in catching pike depends on the right tackle. However, fishing from the shore differs from the trolling method, hence the specifics in choosing equipment:
- Whip length. If you are fishing from the shore, you need a cast of up to 70 m. Take a stick of at least 3.5 m. From a boat, the distance is reduced, so a rod of 1.8-2.5 m is sufficient.
- Test. Considering that the toothy huntress does not like strong currents, select a weight for her of up to 40 g.
- Build. Pike goes jigging and twitching. This requires fast and ultra-fast fishing gear.
The material depends on your desires. Don't give up on composite fishing rods, especially if you are a beginner.
Asp
Suspicious fish with keen eyesight quickly notice the catch, so carefully camouflage tackle and bait. You won’t find an asp near the shore; for successful fishing you will have to cast often and far. Hence the parameters of the baitcasting fishing rod:
- length – 2.8-3.2 m;
- build – medium and fast;
- test – 25-30 g;
- bait - jigs, spinners, wobblers, castmasters.
Do not forget about a strong fishing line: the asp provides powerful resistance.
Zander
Look for the inhabitant of fresh and slightly salty waters in clean places: fast-flowing rivers, deep holes with a hard bottom. For voracious pike perch, offer jig wiring, foam rubber and silicone wobblers with recesses.
Assemble a specific fishing kit taking into account:
- high sensitivity;
- large margin of safety;
- sufficient rigidity;
- range.
To do this, you need a form up to 2.8 m long (from a boat - 2.1 m), with a fast action. The weight of the bait is enough for 15-40 g. All parameters are met by spinning rods of the “Gancho” series under the GAD brand.
Perch
The tenacious fish prefers northern cold waters and southern rivers. Perch's favorites are microjig (bait weight less than 5 g), miniature spinners and twitching.
A new type of fishing is quickly gaining popularity - nanojig. Lures weighing less than 1 g turned out to be catchy for finger-sized specimens. The tenacity with which a little thing fights for life evokes respect.
The weight of the prey rarely exceeds a kilogram, so a light and ultra-light fishing rod with a fast action and a test weight of up to 14 g is sufficient. Use braid 0.1 mm in diameter, fishing line - 0.15-0.2 mm. Blank length: for fishing from the shore - up to 270 cm, from a boat - up to 240 cm.
The best spinning rods for jigging
The jig technique was invented for catching bottom predators and involves moving the bait underwater from the bottom to the surface, provoking the fish to attack. An experienced fisherman invents his own “dance”; a beginner is recommended to use a basic element - stepped fishing.
Fishing is a creative process; in order to take a trophy you have to try and look, but according to the size of the bait, jigs can be divided into types:
- Microjig - ultra-light rods and lightweight jig heads are used. The method is catchy; lazy perches grab small tasty bait. The mormyshing method will allow you to catch a bull from the Moscow River.
- Standard jig - uses a light or medium spinning rod or casting version. A medium-weight ball with a silicone vibrating tail is attached to the fishing line, stimulating, for example, trout appetites.
- Large jig - a long-range spinning rod is used to catch large predators; it is also a good method for breaking through an unknown floodplain with a heavy “Cheburashka”, assessing the depth and finding a concentration of fish.
Main parameters of spinning rod
The type of wiring determines the structure, dimensions, weight, material used, etc. Therefore, you should decide on these parameters in advance so as not to spend a lot of time in the store. Professionals already know the key features, so it is much easier for them to choose a specific model. Beginners need to study this issue in more detail.
To make it easier to make a choice, you need to know the wiring principle:
- The wobbler sinks to the bottom and begins to move in different directions, reminiscent of a zigzag;
- Most of the time the bait is located in the lower part;
- It is necessary to constantly adjust the tension of the fishing line, while the fisherman must not forget to constantly monitor the upper part of the rod.
Based on these features, choosing the appropriate option for a jig will not be difficult. The fishing rod must meet the following criteria:
- The rod should guarantee a quick response to a bite;
- Control must be carried out safely;
- High throwing range.
The jig spinning rod is designed for users who are able to provide good control, but at the same time have a great feel for the product. In a standard fishing rod, all these characteristics are achieved through the correct equipment; in casting models, only correct retention plays the main role. To better determine bites, it is necessary to test the fishing line; tactile perception, although more complex, is much more professional. In addition, casting makes it possible to carry out a clear fixation with fish of any size.
Selecting a rod for twitching is much more difficult, since it is almost impossible to predict the behavior of the bait. For this option, it is recommended to use special wobblers, as well as a fishing rod with a fast action. If a person prefers to fish from a boat, the optimal length is 2.1 m; in the case when hunting is carried out from the shore, the maximum value is 2.5 m. Also, it should be understood that the spinning rod should be light, otherwise the brushes will quickly get tired and discomfort will be created, which will interfere with normal fishing.
Casting models are best suited for these purposes. Thanks to its light weight and high range, it is easier for a person to perform a high-quality cast and subsequent hooking.
The main parameters when choosing this option are:
The form must be a complete structure without any signs of damage. Every connector, ring, spool holder, etc. have good quality
Therefore, it is best to buy models from well-known manufacturers. There should be no extraneous sounds when shaking the fishing rod. It is recommended to pay attention only to models with fast action. They will provide better wiring and will not fail during jerking. The optimal test is 21 g
If you plan to use massive wobblers, then options designed for 28 g are suitable.
The best budget spinning rods for jigging up to 4000 rubles
Maximus WorkHorse-X 18L
Maximus WorkHorse-X 18L fully confirms its loud name. Despite its dimensions and light class, this spinning rod for jig is a real “workhorse”, for which it was awarded a leading position in the rating. Judging by the comments of users, the model more than once saved bites from what seemed like an inevitable cliff and pulled out trophy fish even under conditions of severely limited perceived loads.
The Maximus WorkHorse-X 18L can only be used when fishing from a boat - a 1.8-meter spinning rod, alas, is not capable of shore fishing. But it shows itself in the best possible way in terms of strength and ergonomics, outshining more advanced competitors... and it is very inexpensive, which makes it highly popular among users.
