What is a fishing scarf and how to use it?


How to make a scarf for fishing

Headscarves are screen tackles. They are lowered into the water for a short time, then rise, after which the fish entangled in the screen net are collected.

TV - pieces of nets of 4-gonal shape, having sinkers and a float. The scarves have a 3-corner shape. They are mainly used during winter fishing, when it can be easily pulled into the hole.

Making such a fishing net yourself is quite easy.

Stages of work

You should purchase a piece of net with the required parameters from a fishing store; you may also need a braided cord. The mesh sizes should be selected in accordance with the type of fish that will be caught in this way.

It is necessary to prepare a piece of reinforcing rod with a diameter of about 4 mm; for fishing in a river current, a rod with a diameter of 1 mm may be needed.

It is necessary to spread the net fabric over a large surface and mark the final cells on 2 sides using rope or electrical tape, taking into account allowances of at least 2 cells for fastening. Then you need to calculate the number of cells along the length and mark the middle one.

Then, using sharp scissors, you need to cut off the corner of the edge of the canvas to the final cells on 2 sides. The next row should be 2 cells larger than the previous one, 1 on each side. As a result, a 3-coal sheet with equal sides should come out.

Final stage

It is necessary to apply about 5 notches to the ends of the reinforcement rod using a chisel at a distance of 2 cm. Then you need to thread a nylon thread into each cell from the bottom of the network fabric. The thread should be secured to the notches on the side with knots so that there is a slight sag of 5 cm at the edge of the net. The thread should be parallel to the reinforcing rod, there should be no twists.

Then you need:

  • divide the length of the edge from the bottom of the net fabric into 4 equal parts,
  • mark cells.

Then the nylon thread is fixed in these cells to the reinforcement rod.

It is necessary to thread the vein upward into the cells on one side of the fabric. Then this vein needs to be threaded down the other side. The vein should be secured to the reinforcement rod in the place where the lower edge is secured on both sides.

It is necessary that the vein passes through all the cells of the network fabric up and down. It is necessary to leave about 9 cm of veins on the upper part of the canvas to connect the fastening loops.

Finally, you need to tighten the top loop of the “kerchief” with an ordinary knot.

2 A simple and quick way to knit a fishing net like a TV or scarf

A video about how to properly weave a fishing net in the shape of a triangle to make a fishing device “TV” or “kerchief”.

Making a classic headscarf

The scarf can be used to catch fish of different sizes.

Therefore, the parameters of the gear will have some differences.

However, the technology for making a classic scarf looks approximately the same:

  1. The main element of traditional winter gear is a fishing net. For catching live bait, fine-mesh fabrics (18-20 mm) are used, and when catching large fish, the perforation reaches a size of 40-50 mm. The mesh is spread on a flat surface, and the future gear is marked. Usually the scarf has the shape of an isosceles triangle. Its base should be on a flat section of the workpiece, after which the distance between the two peaks is divided in half. All that remains is to draw a perpendicular line of a certain length. The resulting third vertex of the triangle must be connected to the other two corners. Using scissors, a triangular blank is cut out.
  2. To quickly immerse the tackle, a sinker is mounted to the net. Its role in the scarf is played by a steel rod 4-5 mm thick. The length of the wire depends on the overall dimensions of the mesh tackle. On the resulting segment, you need to make 4-6 notches with a chisel. The distance between them should be 20 mm. Notches are required to securely fix the rod in the mesh fabric.
  3. Thick fishing line (0.5-0.8 mm) or nylon thread is threaded through the cells at the bottom of the mesh. The fiber is attached to the rod by knots on notches. During the installation process, it is important to leave some slack in the edge of the mesh. In this case, the thread should run parallel to the wire without twisting.
  4. A nylon thread is threaded into the sides of the triangle. The reinforcing fiber must pass through each cell. One end is tied to a steel wire, and a loop is made from two wires in the upper part. A rope will subsequently be attached to it to lower the net into the water.

Read also: How to make a gazebo with your own hands video.

Useful video

Next, let's watch a video about park fishing with a kerchief in winter:

The scarf has proven itself to be an effective means of catching fish in winter conditions. In skillful hands, in a catchable place, with properly prepared bait, it works great even in unfavorable weather conditions, when ordinary tackle equipped with a hook is unproductive.

But we must never forget that a real, correct fisherman never takes an excessive amount of fish, especially fry, which must subsequently grow up and give birth to their offspring. Everyone needs to remember about the safety of fish stocks in our reservoirs, and then our children and grandchildren will also be able to go fishing, enjoying their catch.

klevyj.com

A quick way to get live bait for girders or how to properly assemble a scarf for winter fishing

If fishing from ice attracts you, first of all, for its sporting component (playing with baits, waiting for bites, timely hooks, etc.), then a scarf for winter fishing is not for you.

It is designed to catch in the shortest possible time and without much effort the required amount of fry used as bait (mainly on girders), or other small fish for fish soup or for roast. This gear is very effective and quite simple to make, but there are certain subtleties in how to use it correctly that are useful for every angler to know.

Read also: How to make beds in a vegetable garden from slate with your own hands.

Application of bait

A scarf is a fairly small net, which means that some additional factor is needed to attract fish to the place where the net is installed. Along with this gear, you almost always have to use one or another version of bait mixtures

It is important to take into account that the composition of these mixtures will differ significantly depending on the season.

In open water, a light mixture with a pronounced aroma of spices will work well (this smell is attractive to most types of fish). In this case, you should simultaneously use both highly moistened bait balls, which will work when they fall to the bottom, and under-moistened ones, which will create a trail in the water column that attracts fish. In order to increase the effectiveness of bait, animal components of maggots, red dung worms or food bloodworms can be added to its composition.

Important! You can use the technique of feeder athletes: cut the red worm or maggots with scissors, and only then add it to the bait

This smell can attract the attention of even the most passive fish.

Winter varieties are usually less nutritious, their aroma is much weaker, and the color is usually dark. A strong spicy smell or bright colors in winter can, on the contrary, scare away fish from the place where the scarf is installed. A winter version can also be made from summer bait simply by adding a sufficient amount of soil.

You should also pay attention to the method of delivery of bait. In winter, it is better to use special feeders that allow you to release bait directly to the bottom of the reservoir.

In the summer, the feeding process is somewhat simpler - ordinary bait balls are quite enough.

Fishing in winter with a scarf

A real fisherman will not sit at home even in severe frost, but the fish do not always meet his desires. Sometimes it is caught, sometimes it is not caught.

And in winter, sometimes you really want to sip hot ears! Therefore, many people put winter fishing rods aside and switch to fishing with non-sporting, but effective gear. For example, a scarf.

With this simple design you can catch a wide variety of fish: fish soup, live bait, and sometimes even pike. What kind of gear is this? And what is good about fishing with a scarf in winter?

Net

By and large, a scarf is a network. Only a very small one, so it’s hard to call it a poacher. The working element of the scarf is a piece of fishing net in the shape of a regular triangle with sides up to 1.5 meters long.

You can cut one out of an old torn fishing net, you just need to find a surviving section in it. The size of the cells can be different; it is selected depending on what kind of prey the fisherman is targeting.

To replenish stocks of live bait, a mesh with cells of 18-20 mm is suitable, and if your ambitions are off the charts, then you can install a more serious canvas - 40-50 mm.

Frame

An equally important component of the scarf is a rod made of metal wire, which acts as a sinker. He not only lowers the tackle to the bottom, but also puts it in the working position, that is, vertically

To prevent such a frame from slipping out of the canvas, ears are made at its ends, and on it itself there are special notches that will securely hold the fixing line or nylon thread. For the scarf to work properly, the mesh at the point of attachment to the wire must sag a little.

The ends of a thick fishing line (nylon thread) go to the top of the triangle and are tied together. At the edges of the frame, loops are made for the rope, on which the tackle will be lowered into the hole.

As you can see, there is nothing complicated in this design. To make a scarf for winter fishing, just find an old net, a piece of wire with a diameter of 3-4 mm, a skein of nylon thread and twine. A little effort and she's ready.

Kerchief in action

Anyone can master the technique of fishing with this catchy tackle, even a person who has never been interested in fishing before. True, his catches will be smaller, since he does not know how to find fish sites.

Where to fish

It is with the search for winter havens of underwater inhabitants that fishing with a scarf in winter begins. Usually these are deep holes, called wintering holes, but this approach is relevant for the middle of the cold season, when the fish practically do not move. But when there is first ice and closer to spring, you should look for fish in the same places where they were caught well in the summer.

A big catch and a great mood can be given by installing one or several scarves near the shore, among the remnants of reeds and other vegetation.

When a suitable location has been determined, you can begin drilling holes. Even if you only have a couple of scarves in your arsenal, there should still be several holes.

After the tackle has been in each of them, it will become clear where it is better to fish.

Feeding

The scarf is perhaps the only net that is used for fishing with bait. This will seem nonsense to sports fishermen, but without complementary foods it is really ineffective. A one-and-a-half-meter canvas, tapering at the top to zero, takes up a tiny space, so the fish have to be literally lured into it.

As bait, fans of this tackle use various mixed feeds, steamed wheat or pearl barley, breadcrumbs and even ordinary soaked bread.

It would be a good idea to mix all of the above, then the bait will attract different types of fish.

If you add components of animal origin (food bloodworms, crushed worms) to the mixture, you can count on catching ruffs and perches.

Fishing technique

When the hole is baited, the tackle is lowered into it. It is best to install it at the bottom, especially since there is attractive food there, although sometimes due to lack of oxygen the fish can rise to the middle and upper horizons. A stick slightly longer than the diameter of the hole is tied to the free end of the rope, which, after installation, is laid across the hole in the ice.

It is covered with brushwood on top, and then everything is covered with snow so that potential prey is not frightened by the light spot above its head. Some fans of scarf fishing disguise the end of the rope for another reason, especially when they leave several such gear on a pond for a long time. This way, fishery inspectors or “colleagues” who are greedy for other people’s property will not be able to see and take them away.


How to assemble it yourself

With this gear you can catch fish of various types and sizes on almost any body of water with established, strong ice. And although the technology for its manufacture is the same for all cases, the main parameters of the scarf are selected depending on what kind of fish will be hunted.

What is needed for making

In order to make a headscarf for winter ice fishing we will need the following:

  1. A piece of fishing net with the required mesh. The smaller the fish you plan to catch, the smaller the mesh the mesh should have.
  2. A metal rod 1.2 - 1.5 m long and with a diameter of 5 to 8 mm. It will serve as the basis of the lower part of the scarf, which will allow it to straighten out under water, and, at the same time, as a load.
  3. Nylon thread or fishing line with a diameter of 1.5 mm for attaching a metal rod to the mesh and for strengthening the other sides of the triangle.
  4. A rope made of waterproof material for lowering and raising the scarf when fishing.

The following tools will be useful: a metal saw or a chisel with a hammer, a knife, scissors, and pliers.

If fishing is expected in a body of water with a current, lead plates to increase the weight of the load. They will need to be secured in two places - at different ends of the metal frame.

Read also: How to make a weather vane with your own hands from metal, photo drawings.

Process

The algorithm for making this simple tackle is as follows:

  1. cut out a triangle of the appropriate size from the prepared network . The easiest way to do this is with sharp scissors, spreading the material on a flat surface of a suitable size, for example, on a table or flat floor. The length of the side of the triangle must be no less than the length of the metal rod selected for the base of the tackle.
  2. Using a metal saw or chisel on the rod, shallow cuts (notches) must be made every 18 - 20 mm . They will serve to more securely attach the net to it with a nylon thread and will not allow it to be lost during the fishing process.
  3. Using a nylon thread or prepared fishing line, the rod is attached to the bottom of the scarf (one of the sides of the triangle). The main fastening units must be knitted in the places where the cuts were made. Make sure that upon completion of installation there is a slight sag in the network in this part. The net should not be pulled to the rod; this will allow the scarf to be more catchy.
  4. By threading the same thread (fishing line) through each mesh of the network on its sides, we strengthen it . Such reinforcement will allow the bait to keep the correct shape under water and not release the fish caught in it. In the upper part of the triangle, you need to make a loop from it, which will serve to secure the main rope.
  5. We thread the waterproof rope through the prepared loop and, passing it along one of the sides of the triangle through 2 - 3 meshes, fasten it to the end of the metal rod. It should move freely through the top loop. This design will allow the scarf to freely straighten after it is lowered in the assembled state to a depth and to be assembled when it is lifted, emerging from the narrow hole at one end.

If fishing will take place on a river with a noticeable current, to increase the weight of the rod, you need to attach lead plates to its ends. Their weight and size must be selected experimentally.

Subtleties of proper fishing

Fishing with a scarf is a very exciting activity that interests not only experienced fishermen, but also beginners who want to experience new emotions and get vivid impressions. Fishing with this method is very simple, so even an inexperienced person can easily master the basic subtleties of casting techniques and further operation of the gear. The key to successful fishing is determining the current location of the fish. To do this, you need to at least understand the peculiarities of its behavior in winter, taking into account the many years of experience of colleagues and local fishermen.

It is no secret that in the first days of winter, the inhabitants of the depths stay in wintering pits almost without leaving them. To quickly determine their location and then go fishing successfully, you should follow these recommendations:

Good feeding of a promising hole is already half the battle

It is important to properly feed the appropriate area, using proven store-bought products or formulations created according to your own recipe. The second option is more interesting, because it allows you to create good bait for specific conditions

They may contain breadcrumbs, mixed feed, steamed wheat grains, all kinds of cereals, plant and animal components, etc. Comfortable winter fishing is impossible without a good ice auger. Of course, if the thickness of the ice in the chosen place does not exceed 10 centimeters, then it can be cut with a sharp crowbar, although it is not entirely safe to be on such a surface. If the ice is much thicker, then it is advisable to use a powerful ice drill. After making sure that all the holes are prepared, you can start feeding the fish. To do this, you need to take a special feeder where the complementary food is placed, and lower it to the bottom, where the load will begin to crumble and create a cloudy cloud that can arouse the interest of even the laziest prey. After successful feeding, you can place a scarf in the hole, tied to a reel or stick using a strong cord. With a passive fishing method, such fixing elements can be sprinkled with snow and moved to the side so as not to scare the fish. Experts recommend using a scarf for fishing only at the beginning of winter and during the last ice, since during this time period the chances of a successful catch are maximum and costs are reduced to a minimum.

https://youtube.com/watch?v=aGV2-z5dxyo

Rules for fishing with a scarf

It is very important, when using a scarf, to adhere to some fishing rules that will allow not only our generation, but also the next one, to enjoy the process. If you can’t find a fishing spot, it’s unlikely that you’ll be able to catch anything with a scarf, because

Fishing with a scarf in wintering pits is prohibited by law.

Having caught enough fish, you need to take with you only the amount that you can eat at one time. Don't be greedy. The rest of the fish should be released.

The same should be done with small change. Let him grow up rather than feed the cat. She can be caught next time.

Video about catching roach with a scarf from the ice:

Kerchief tackle is an interesting way to catch fish during winter fishing and a quick way to get live bait for girders

With such gear as a scarf, you can catch, for example, live bait in winter, or fish directly on the grill. In just one cast you can catch more than one specimen, without any unnecessary movements.

Everyone should understand that you can’t catch fish from the pond without effort. Therefore, it is necessary to be able to use such equipment and know how to use it correctly.

Fishing with a capsicum during winter fishing, like other gear, has its own approach and tricks. And excitement and interest manifests itself when you find a catchy place and get a hefty catch onto the ice.

A kerchief is a simple winter fishing tackle and a way to quickly catch live bait for girders

Some will consider the headscarf to be poaching gear. And to some extent they will be wrong. I’ll say right away that such kerchief gear is not included in the list of prohibited items.

But there are individuals who, for the sake of profit, often neglect and take advantage - they put a scarf in large quantities (from 5) and fish with it in the wrong places (wintering pits).

This is no longer a completely fair way of winter fishing.

What is a scarf tackle for winter fishing?

In the summer, “screen” or “TV” – whatever you like, and in winter – “kerchief”.

Can you guess what we're talking about?

Yes, this is not a sportive form of fishing! Part of the mesh is used.

If in summer there are no obstacles in the form of ice, so summer copies of scarves are made rectangular, then in winter it is difficult to lower and lift such tackle into the hole.

A scarf is a triangular piece of fishing net (an isosceles triangle - hence the name of the net - it looks like a lady's headscarf), the lower part of which is tied to a steel rod.

Thick steel wire serves as a sinker. Due to this, the scarf is quickly delivered and pulled vertically.

A rope for fishing or a thick fishing line is placed along the other two thighs-sides of the triangle.

The dimensions of the triangular mesh are no more than 1.5 meters on each side.

The grid cells are selected depending on the fishing conditions. Small baitfish are caught on a net with cells from 10 to 18 mm, and larger fish are caught on a net with cells up to 50 mm.

Where and when can you fish with a scarf during winter fishing?

It is best to catch winter fish with a scarf on the first ice and closer to spring - on the last ice. In the wilderness you won’t catch much with such gear.

In winter, a scarf can also serve as a supplement to the main types of fishing.

You need to catch such gear in places where fish accumulate - in holes and cliffs. Fry are caught with live bait in the upper layers, and larger fish are caught at the bottom.

Do-it-yourself scarf for winter fishing - quick and easy to make

Honestly, such winter gear as a scarf can be purchased in a store for little money - from 100 to 350 rubles.

Well, you can make a scarf yourself quickly and without problems.

To make your own headscarf for winter fishing you will need:

  • steel rod with a diameter of 5 mm,
  • fishing net with mesh 10-50 mm,
  • nylon rope or thick fishing line (0.7-0.8 mm).

Well, a tool suitable for making a scarf.

1. Cut out an isosceles triangle from a piece of net, the sides of which are 1-1.5 meters long.

2. Next, the lower side is attached using knots to a steel bar.

3. We tie a fishing line to one end of the rod and thread it through the mesh cells of one of the edges of the triangle.

4. At the end of the fishing line we form a loop through which the nylon rope passes to the other end of the steel bar.

How to fish with a scarf during winter fishing: tactics and principles of fishing

There is nothing difficult about fishing with a scarf during winter fishing.

The most important thing in fishing tactics with such gear is to feed the fish correctly.

If there is a current, then several holes are drilled for feeding. The bait should be, like all winter bait, loose, creating a cloudy cloud.

Downstream, a working hole is drilled into which the gusset is lowered.

We fill this hole with snow and small branches. Then you should move away from the hole so as not to scare the fish.

Every hour or half an hour you can check the tackle for catches.

And I would also like to draw attention to the fact that fishing for us is a hobby, not profit. Original article here: Scarf for catching fish during winter fishing. Original article here: Scarf for fishing during winter fishing

Original article here: Scarf for catching fish during winter fishing.

Follow my channel - it will be even more interesting!

Interesting and catchy winter tackle “Sapozhok”: works great in the dead of winter Dergusha – Stretching fishing is a great way to go fishing in winter fishing New fines for fishermen for fishing: Fishing supervision and deputies have become completely insolent Bloodworm is good, but there is even better – a catchable larva, which all the fish bite in winter

What is a fishing scarf and how to use it?

It is popular to go fishing at any time of the year. This pastime allows you to relax, forget about all your problems and feel like a real hunter. Today there are a lot of special tools that guarantee a successful fishing outcome. One of the fisherman's devices is a scarf. You can do it yourself, taking into account all the preferences of the master. Next, we will look at options on how to knit a scarf for fishing yourself.

A scarf for summer fishing is a popular fishing tackle that has a durable frame made of metal, and a special mesh is attached to it. In addition, the metal part is a kind of weight, thanks to which the net is not pushed out by water and quickly sinks to the bottom. A variety of product models allows you to choose the most suitable option and have a successful fishing season. The sizes of scarves for fishing can vary and in most cases depend on the purpose of using the gear. For example, large fish require larger mesh sizes.

Using a mesh scarf for fishing is very simple. It is enough just to secure the structure made of metal with a rope and you can safely lower the product into the water. To guarantee catching fish, it is recommended to feed the prey before immersing the scarf. The advantage of using the design is complete immersion to the bottom, which allows you to catch fish of different species and fish in bad weather, when all the living creatures are concentrated on the bottom. Still, the fisherman must adjust the level of immersion based on an assessment of the terrain and the bite.

There are several types of headscarves for summer fishing

There are several types of scarves for fishing. You can choose a specific model based on weather conditions. Depending on the season, it is recommended to use suitable bait, equipment and other equipment.

How to make a scarf for summer fishing with your own hands?

Before starting work, the fisherman needs to carefully research the question of how to knit a scarf for fishing himself. The good news is that anyone can make a product. The process does not require specific skills or expensive materials. All you need is to follow the technology, how to properly make a headscarf for fishing, and do the job efficiently.

Before you begin, you should carefully consider what type of fish is preferable to catch, where the fishing will take place and in what season of the year. Only after this can you accurately answer how to knit a scarf for fishing. After all, the size of the product and its effectiveness depend on the size of the prey and its habitat.

So, for work you will need the following materials:

  1. Fishing net fabric - this attribute must have the mesh size necessary for catching a certain type of fish. The larger the prey, the larger the cells should be and vice versa.
  2. Frame - this structure can be built with your own hands. The main material is wire with a diameter of 4-5 mm.
  3. Fishing line - the material must be thick (at least 0.8 mm). As an alternative, nylon thread can be used.

The quality of the materials will determine the outcome of your fishing trip. Of course, it is better to use more expensive elements and in the future the result will meet all expectations.

Making a scarf for fishing is very simple

Having purchased the necessary materials, the fisherman is faced with the question of how to weave a scarf for fishing?

The manufacturing procedure is quite simple and consists of three stages:

  1. The fishing net is placed on a flat surface (preferably on the floor). Next, the workpiece is cut to the selected dimensions. At this stage, the metal frame should already be ready and the resulting workpiece should be attached to it. In order for the structure to be easily attached to the sinker, it is necessary to make notches on the surface of the frame every 20 mm.
  2. At the second stage, you should deal with the fishing line. The material should be carefully threaded through the bottom of the net and secured where the notches were made. It is important that the network sag slightly. This will help you catch more fish.
  3. All cells must be connected with a nylon thread, and the material must be fixed on the sides of a wire sinker. This process will provide a reinforcing base. It is necessary to make loops on the structure; in the future, the fisherman will tie a rope to them, which will allow the product to be lowered and raised.

Having figured out how to weave a net, think about the materials that will be used. If necessary, use the help of a friend and build the structure together.

The strength of the finished product depends on the choice of source materials for the scarf.

Despite several technologies and techniques for preparing a scarf for fishing, there are no big differences in the work. A feature of each product is the size of the net cells, depending on the type of prey that the fisherman wants to catch. There are also some differences in the scarves on which fishing occurs in winter and summer. But the manufacturing principle remains unchanged: the metal frame is connected to the mesh and firmly fixed.

7 minutes Author: Valentin Porokhnya 310

Among fishermen there are still many fans of completely non-sporting gear: scarves, screens, tracks and other types of nets remain consistently popular, including as additional gear or for catching live bait. Trophies caught with such gear are quite rare, but its compactness makes the scarf quite common.

A fishing scarf has a simple structure: it is a net that, when unfolded, has a triangular shape, which is ensured by a metal rod at the base of the triangle. It not only plays the role of a sinker, sinking the tackle to the bottom, but also holds the net in a straightened state. This point allows you to use the scarf, including for ice fishing in winter.

A fishing scarf is a fairly effective tackle in the open water season, especially in cases where you need to catch live bait, or just relatively quickly catch non-trophy size fish, for example, for fish soup, and the fisherman is quite familiar with the characteristics of a particular body of water.

When using such gear, it is important to imagine where it will be most effective. If the net is far from the paths along which fish usually move, then you shouldn’t count on a catch.

When installing a scarf, you need to have a fairly clear idea of ​​the most likely places where fish will accumulate in a particular body of water. Most likely in the spring it will be the growth line of reeds, riverbed edges, snags; installing scarves around a tree fallen into the river may also be quite effective. Sometimes it makes sense to make a little noise, driving fish out of secluded hiding places - this technique is used both for screens and televisions, and for scarves.

Thanks to its specific shape, the scarf, when folded, easily fits into the hole, and after all the tackle is under the ice, it straightens out without any problems. The net is left attached to a stick placed across the hole for a certain time. This principle of fishing allows you to install several kerchiefs at once (in some cases, the count can be dozens of nets), and periodically check them for the presence of a catch.

As promising places for fishing, you should pay attention to the growth line of the reeds. Immediately after freeze-up, fish often continue to stand in such places (especially perch and pike). It is also worth trying to fish near snags and trees fallen into the water, at the entrances and exits of holes. The better the angler is familiar with the features of the bottom topography, the higher the likelihood of success when fishing with a scarf.

The most effective fishing with a scarf will be immediately after freeze-up, since at this time not all the fish have gone to the wintering pits and can still move quite actively around the reservoir. When the fish is not moving, the scarf is practically useless.

Cambric fishing

Cambric fishing has been around for quite some time. The cambric itself is a combination of one or several small multi-colored pieces of insulation from wires, strung in a certain sequence on the shank of a hook or jig. They can be used both in winter and summer fishing, if, for example, you fish from a boat with a short winter fishing rod.

Different species of fish associate certain combinations of cambric colors with water-dwelling insects, larvae or fallen caterpillars. For example, a cambric may resemble a bloodworm, a burdock moth larva or a caddisfly.

There are different combinations for different types of fish. Perch are most attracted to colors such as red, black, and yellow. Therefore, you can use the following combination for it: yellow-red-black, red with yellow or yellow with black. He readily grabs single cambrics. Every angler should try everything he has and choose the most catchy colors.

The cambrics should be positioned in such a way that the section closest to the hook should be the smallest to prevent the hooked fish from escaping. The segments located closer to the jig body itself should be thicker than the rest. Their length is usually about 2 mm.

For catching roach, I recommend this combination - black with yellow, black with white, white with red and pink with lemon. Instead of cambric, you can also use beads in the same color combinations.

Roach, bream, perch and silver bream are caught using cambric only in those bodies of water where there is enough oxygen - i.e. in bodies of water with current. In most cases, you can catch without bait. Although some people use breadcrumbs and semolina, it makes sense to feed them in places where there is no current - in areas of reaches and bends.

There are many techniques for fishing with cambric. On rivers, where fish are usually more active, it is recommended to actively play with bait, moving it quickly through the water column. Combined wiring is also possible - this is when a transition is made from fast wiring to slow wiring with regular stops. On reservoirs with stagnant water, the action of the jig should be slow, with a small amplitude. When fishing on the first or last ice, remember that at this time the fish most often grabs the bait at half-water.

The tackle must be very sensitive and well adjusted. The jig can be used in any shape or color. For shallow depths, we respectively take smaller ones; at greater depths we use heavier baits.

In conclusion, I want to say that this method of fishing is not only an exciting activity, but also a fairly economical type of fishing, since you do not have to buy any baits.

https://rybak.guru/kosynka-dlja-rybalki/https://zdesriba.online/ulov/lovlya-na-kosynku-letom-video.htmlhttps://rybak.guru/kosynka-dlja-rybalki/https: //som.rybalkanasha.ru/sekretyi-lovli/lovlya-ryby-na-kosynku-letom-video/

Installing a scarf in a pond

Before you start lowering the triangle into the water through the hole, you should feed the fish in advance. Experienced winter fishermen know all the intricacies of complementary feeding:

  • soaked pressing from the processing of sunflower seeds into oil;
  • steamed cereal grains;
  • store-bought crackers for cutlets.

Complementary food in standing water can simply be poured into a hole, and as it flows, placed in some kind of low container-feeder so that the water does not wash away.

But besides home-made fish bait, there are effective factory-made ones, for example, with the addition of farm animal blood. So schools of fish literally fly to her in the water. And they will retain this instinct for more than one day.

Fishing with a "kerchief" from the ice. Video | Master Fisher

A large number of fishermen do not put away their favorite gear even during the winter, but continue to regularly go out on the ice to engage in their favorite hobby. One of the popular gears even in winter remains the “kerchief”. In this article we will tell you in more detail how to fish with a scarf from the ice in winter.

Schematic representation of the kerchief tackle

Fishing principle

A fishing scarf is a triangular tackle that consists of a steel frame with a mesh cloth attached to it. The steel frame also acts as a sinker, which allows the tackle to sink to the bottom.

The size of the cells of the scarf can be anything, it all depends on what kind of fish you plan to catch. If the scarf is used to catch live bait fish, then the mesh size should not exceed more than 20 mm.

If the tackle is used for catching serious fish, then the mesh size should be 50 mm or more.

Depending on the fishing conditions, the scarf can also be installed in the water column, closer to the surface, when small fish rise in search of food or an additional breath of oxygen. Fishing with a scarf can be either active or passive, when the gear is installed for the whole night or all day. Some anglers use a scarf during regular fishing by placing it in an adjacent hole.

Fishing tactics with a scarf

The tactics of fishing with a scarf are very simple, so any novice angler can master it. The main condition for successful fishing is a successful search for fish sites.

You can use store-bought complementary foods or, again, prepare them yourself. The main thing is not to overdo it with flavorings.

After feeding the hole, you need to lower a scarf into it, which is tied to a cord, and that to a stick or reel. They (a reel or a stick) should be placed across the hole.

The scarf will allow you to catch a sufficient amount of fish with minimal material and physical costs.

Small fish should be released, leaving only worthy specimens in the catch

Rules for fishing with a scarf

It is very important, when using a scarf, to adhere to some fishing rules that will allow not only our generation, but also the next one, to enjoy the process. If you can’t find a fishing spot, it’s unlikely that you’ll be able to catch anything with a scarf, because

Fishing with a scarf in wintering pits is prohibited by law.

Having caught enough fish, you need to take with you only the amount that you can eat at one time. Don't be greedy. The rest of the fish should be released.

The same should be done with small change. Let him grow up rather than feed the cat. She can be caught next time.

Video about catching roach with a scarf from the ice:

How to make a scarf

A scarf is one of the simple fishing tackles that you can build yourself.

Tips for fisherman: How to catch bream in the winter on the current - What is the difference, pros and cons

What you will need

To make a scarf, you need to prepare the following materials:

  • Fishing net with the required cell dimensions;
  • A metal rod or thick wire, the diameter must be at least 5 mm, the length must be at least 1.5 m;
  • Thick fishing line or thread made of nylon with a diameter of at least 0.8 mm.

The metal rod will simultaneously serve as both a frame and a sinker.

Manufacturing process

After all the materials have been prepared, proceed to the construction of fishing gear:

If fishing from ice attracts you, first of all, for its sporting component (playing with baits, waiting for bites, timely hooks, etc.), then a scarf for winter fishing is not for you.

Features of the scarf

The scarf is quite a useful and convenient tackle for fishing enthusiasts due to its features:

  • It has the shape of a triangle, thanks to which it easily fits into the hole;
  • Easy to use, to catch fish you just need to attach it to a rope;
  • Easily removed from under the ice.

The design does not have a float and is intended only for ice fishing. However, it is not possible to fish with it throughout the entire winter period; in severe frosts it will not bring any catch.

Let's celebrate! It is best to use the device at the beginning of the winter, when the ice is just getting stronger; at this time, the fish are looking for a parking place, so they gather in schools.

Description of the scarf

This type of gear consists of:

  • Metal frame;
  • Canvases mainly use a mesh with small-sized cells;
  • At the top of the structure there is a ring, behind which the scarf is attached to the rope.

The frame of the device most often consists of a metal rod, which simultaneously serves as a sinker, with the help of which the structure is lowered under the water to the very bottom.

Note! The size of the cells on the grid is selected individually. If you plan to catch small fish, then the dimensions should be no more than 20 mm. If fishing tackle is used for fish that will go to the fish soup, then the mesh size must be at least 50 mm.

The principle of fishing with a scarf

https://youtube.com/watch?v=X83jcVGixJ8

Fishing with this type of structure is quite simple. To do this, fishing tackle is lowered into the prepared hole, always with the sinker down so that it is at the bottom. After this, the fish are fed with special food, which uses ready-made mixtures with plant or animal additives. Rusks, swollen grains, cake or maggots are often used as additives.

In different winter periods, the device is lowered to different depths. At the very beginning of winter, when the ice has just hardened, the fishing gear is lowered closer to the ice surface. This is done because the fish is quite active and has not sunk to the bottom.

The same is done at the end of the winter period, when the air temperature becomes significantly higher, this is explained by the fact that the fish rise closer to the ice surface due to the large amount of oxygen in the water.

In the middle of winter, it is practically not used, since the fish sinks to the very bottom, buries itself in the silt, where it finds food for itself and does not freeze. Therefore, the fish is not interested in complementary feeding, and it will not come up for it. In severe frosts, fishing with a scarf is useless; there will be no catch, since the fish will not come out for food.

Note! After the fisherman feeds the fish, a scarf is placed in the hole. It must be left for a certain period of time, and then checked. This type of fishing tackle allows a fishing enthusiast to fish not only with it, but also to use a fishing rod at the same time. In this case, the catch will be larger and richer, just don’t forget to periodically check the scarf.

Do-it-yourself fishing scarf: description, diagrams and reviews

Every year, with the onset of winter, an increasing number of Russians, in their free time from work, strive to go out into nature and engage in the most exciting activity of fishing. There is a lot of gear and various devices so that anglers do not return from fishing without a catch. Fishing tackle "kerchief" is often used by fishermen for fishing in winter.

“Klondike” is a screen fishing tackle that has a triangular shape. It consists of a metal rod to which a mesh fabric in the shape of an isosceles triangle is attached. At the top of which there is a ring, a rope is tied to it. With its help, the tackle is lowered into the water. The rod plays the role of a sinker, helping to lower the device under water. The mesh cells can have different sizes depending on what kind of fish it is intended for hunting.

Using the fishing kerchief tackle is very simple. A hole is drilled in the ice, the dimensions of which will allow you to lower a metal rod attached to the base of the triangle. They throw food into the hole, which they prepare themselves or buy at a fishing store.

When fishing on the first ice, when the fish has not yet sunk to the bottom and is active, the “kerchief” is lowered closer to the ice surface. The tackle during this period is most catchy. And they do the same closer to spring, then the fish rises to the top, since here the water contains more oxygen.

After the fish is abundantly fed, the “kerchief” is lowered into the hole. It should be checked after a certain period of time. Fishermen who have extensive experience take this device with them every time they go out on the ice. They put a “kerchief”, checking it periodically, and at this time they themselves continue to fish with other gear. The catch in this case will be much richer.

You can make a simple and useful tackle with your own hands.

  • fishing mesh with the required mesh size;
  • a metal rod or thick wire with a diameter of 5 mm and a length of 1.5 m, which will also serve as a sinker;
  • thick fishing line or nylon thread with a diameter of 0.8 mm.
  1. Lay the fishing net on a flat surface and use scissors to cut out an isosceles triangle with a base equal to the length of the rod or wire.
  2. Make notches on the metal rod every 20 mm, using a chisel, to firmly attach the blade to the rod.
  3. Attach the canvas, making a slight slack (without it, the tackle will not work correctly), using fishing line or nylon thread to the metal rod in the places where the notches were made.
  4. Thread a nylon thread through each cell of the side walls of the triangle. At the top of the triangle, attach a ring to which a rope will be tied to lower it under water.

Making a fishing scarf with your own hands is simple, but sometimes for some reason you don’t want to do it or don’t have time, then it can be purchased at any store that sells fishing tackle. It’s even easier to buy this tackle in an online store by clicking the mouse several times. Its cost is quite small - from 80 to 200 rubles.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]