Catching pike with a jig from a boat: tips for beginners

You can successfully catch pike with a jig all the time until the pond freezes over. But depending on the time of year, there are a number of features.

Most anglers believe that jig from a boat is more promising and effective. Having a boat makes it possible to choose any fishing spot. With the help of a boat, you can get as close as possible to the fishing spot and stand in such a way that the wiring is comfortable and effective.

If you fish from the shore, you need to constantly move and change casting points. From the shore it is very difficult to get around all sorts of obstacles that will interfere with casting and fishing.

If we talk about rubber, it has recently become extremely popular. Some other species are not even considered by fishermen as a real alternative. This “folk” love can be explained by a huge number of different shapes, colors, and sizes. Crayfish, worms, twisters, vibrotails, edible and inedible, floating - all this can now be found in stores at fairly low prices.

There is an opinion among experienced fishermen that the most effective and convenient type of bottom fishing, especially for perch, with the help of a good spinning rod is jig. Throughout the calendar year, in various regions, a huge number of fishermen resort to it. But a special effect from it can be noticed in autumn and spring. We will touch on a variety of aspects of this method of fishing and thus guarantee ourselves a lot of catch.

Choosing a suitable fishing rod

The spinning rod must skillfully “recognize” the touch of the bottom or the attack of the fish. For example, the attack of pike perch resembles a weak push. We'll start with choosing the right fishing rod. A very important aspect is its size. Fishing with a long fishing rod will be extremely inconvenient; the best option is 1.8 m or 2.1 m .

In addition, it should allow a person to throw gear far. For this reason, rods with good guides are valued. Thanks to their shape and material, they create minimal friction, which allows you to throw the tackle over a decent distance.

When choosing a range and length, consider the following points:

Aggression of wiring;
The presence of a current in a reservoir and its speed;
The depth of the reservoir where fishing will take place;
Total weight of the bait;
Casting distance.

Fishing will be as convenient and comfortable as possible if you listen to the advice.

Let's talk about bait

Without a doubt, all the following advice is purely individual, but they are based on the actual experience of anglers and practice. Silicone options, foam rubber products, as well as special spinners with a front weight that can rotate, have proven themselves to be the best. For some anglers, it is most convenient to use spinners with an oscillating effect, which only attracts fish.

If we talk about rubber, it has recently become extremely popular. Some other species are not even considered by fishermen as a real alternative. This “folk” love can be explained by a huge number of different shapes, colors, and sizes. Crayfish, worms, twisters, vibrotails, edible and inedible, floating - all this can now be found in stores at fairly low prices.

For those who want to expand their own arsenal of baits and equipment:

Most fishermen believe that jig and oscillating spoons are two incompatible concepts. However, this is not the case. A classic step with lowering to the bottom of the reservoir in a localized place will provide more bites than uniform wiring.

Jig line

Jig fishing from a boat can be done using braided or monofilament line. However, if we consider the characteristics of quality and strength, then the best choice would be to purchase braided fishing line.

Thanks to zero stretch, braided fishing line will instantly transmit information from the bottom. The thickness of the line to be used is selected in a practical manner and consists of a balanced selection of equipment for a smooth and natural presentation of the bait.

Experts recommend not to opt for thin fishing line. To ensure protection of the main line, it is necessary to use wiring with an accurate breaking load. The breaking load must be one third less than the base.

The most important thing when fishing is to choose the right equipment and bait. The fishing line and fishing tackle must be able to withstand strong resistance.

Tips from fishermen

Experienced fishermen recommend paying attention to the following points:

pike teeth are very sharp and jaws are strong, so try not to interact with them when caught;
choose high-quality gear and strong leashes that the pike cannot chew through;
the fishing line rarely withstands the pressure of predatory fish, but there are special titanium leashes for this;
to catch a predator, you need to know its habits; To do this, study the behavior of pike in different conditions.

And don’t forget that the main thing in fishing is experience. Practice and your catch will grow in proportion to your talent.

Spinnerbaits.

Jig fishing for beginners: the basics and a few secrets.

Varieties of bait

The following can be used as bait:

Fishing with jig: heavy and light varieties

Big fish in the depths require heavier baits, but trying to catch perch or small pike in shallow water can be done with small baits and light weights.

For great depths, a light jig, also called a “light jig,” is suitable. It is characterized by the use of light weight loads, and therefore rods with a small test and thin line. As a rule, inertialess coils are used. For heavy jigs, heavy weights are used, as well as rods and lures that match them.

Jig fishing for beginners

For those just starting out with jig fishing, it would be a good idea to understand the basics.

The most successful areas for jig fishing are:

1 relief changes at great depth;

When fishing with jigs in any water bodies, these places must be checked immediately.

How is a jig done?

The technology of jig fishing is not particularly complicated, and even a beginner can animate a jig bait.

Standard jigging can be done using a reel: 1. First of all, we cast the bait and wait until it falls to the bottom; 2 we make a couple (two or three) turns of the reel, which lift the bait above the bottom and make it swim a couple of meters; 3 we pause, which is necessary for a smooth descent to the bottom; 4 turn the reel handle again;

Bites most often occur during the time when the bait drops after the next jerk.

What is the difference between jig and twitching?

What is preferable: a wobbler, a jig or a spinner?

Choosing gear

Not many secrets of jig fishing

When preparing gear for jigging, you can put the bait either on the jig head or simply on the hook, which is connected to the “eared” weight using winding rings. At first, many people mistakenly believe that there are no differences between these methods, but this is not true: the differences between these methods lie in the casting distance and how the bait will behave, so both methods should be used.

If you fish in snags, then you practically cannot do without an offset-type hook: a silicone fish is put on it, and the hook tip is hidden in its body - this way you get an excellent hook-free option. A foam rubber fish can be placed on a double so that the hooks are pressed against its sides.

Jig fishing at night

Neither perch nor pike prefer to hunt in the dark, but night jigs can be successfully used on pike perch, which are quite active during this period of the day. Do not forget that at night pike perch tries to feed at shallow depths and most often a wobbler can be a more successful bait. The advantages of the jig in this case include the ease of fishing and the low cost of the bait.

At what time of year does jig fishing perform best?

Summarize

Jig fishing is a fairly effective method that has won the love of many anglers due to its versatility and simplicity. With the right choice of place, equipment and bait, it can show good results and provide you with an impressive catch, as well as a pleasant time. The optimal period for fishing with this method is early spring and late autumn.

In conclusion, we invite you to visit the Cordon base; we will organize transfer to the fishing site and accommodation at our base. You can try all the tips that are listed above in the article and enjoy fishing in Suzuna

Cloudflare Ray ID: 63a9681829b5fa98 • Your IP: 195.64.208.251 • Performance & security by Cloudflare

Many methods are used to catch predatory fish. They differ in equipment, casting technology and bait. A special place is occupied by jig fishing, which is identified as a separate discipline of sport fishing. Its advantages are often used by ordinary fishermen for trophy catches. Mastering this method can take a long time, but the end result makes up for it.

Knowing what a jig is and the basic rules of fishing, you need to choose the appropriate equipment. It is divided into conventional categories - rod, line and reel, bait and hooks. Jig equipment should be variable - experienced fishermen plan in advance the joint use of certain components. The determining conditions for choice are the type of fishing, the planned type of fish to be caught, weather conditions and time of year.

Rod

To fish with a jig you need a sensitive rod that responds well to bites. If the bottom of the reservoir is rocky, you will be able to feel the sound of the sinker hitting it as it lowers. Only the tip of the rod can be sensitive. Such models are called end models.

How to choose a spinning rod for jigging based on the conditions described above? It is recommended to follow these tips:

The material used to make a spinning rod depends on its length. Long models are made of composite materials or carbon fiber. It is recommended to choose cheaper fiberglass only for short runs when fishing from a boat. This is due to the fact that fishing with a jig with a significant mass of spinning rod and long casts will be inconvenient.

Line and reel

The choice of reel affects your fishing style. For casting, inertial ones with a multiplier are used. The traditional jig-spinning model is equipped with spinning reels. It is important to choose the right weight of the bait. If it is less than 15 grams, a spinning reel is installed.

Equipment for jig fishing must meet the following parameters:

Standard size. It is recommended to start from the Shimano classification. According to it, the sizes of the coils vary from 1000 to 6000 in increments of 500. Models with a large indicator have high weight and strength.
The capacity of the fishing line is at least 150 m. If you plan to jig on braided wire, a hard metal coating is applied to the working surface of the reel.
Gear ratio – 5 to 1.

Instead of traditional mono thread, you need to use a cord. The cross section depends on the size of the expected catch and varies from 0.1 to 0.4 mm. Important - a thick cord can float while fishing if there are gusts of wind. The solution is to make the jig rig heavier or choose a different cord diameter.

Hooks and jig heads

The main feature of this fishing is jig baits and specially shaped heads. The hook is connected to the head in a detachable or permanent way. An alternative option is to use a sinker with special ears - “Cheburashka”. It is attached to the gear through two winding rings.

There are the following types of jig heads:

Weight varies from 1 to 50 grams.
The material used is tungsten or lead. Lead models are more popular, as it is an affordable material. You can make them yourself.
Form. In addition to the traditional ball or ski, there are specific shapes - spoon, banana, rugby.

How to choose a specific model by weight and shape? The depth of the casting site and the speed of the current are taken into account. The weight of the fish doesn't matter. You need to select the weight based on the characteristics of the spinning rod - check the feedback for a bite or lowering the bait to the bottom.

Lures

To select a specific type of jig bait, you need to take into account the behavior of the fish. Based on the type of fishing, they are divided into active and passive. The first include vibrotails and twisters. Passive type jig baits – mollusks, lizards, crustaceans, frogs. Most often, the choice is made on active models. They are more suitable for catching predatory fish.

Basic selection criteria:

You also need to master the correct installation of jig baits. For reservoirs with a small amount of grass and a clean bottom, you can install open hooks. If the likelihood of a snag is high, it is recommended to take offset hooks. They fit standard artificial bait models.

The video describes the basics of jig fishing:

Advantages of fishing for pike from a boat

What prospects open up for a fisherman who uses a watercraft? Especially if it is aimed at a predator. For example, pike. Well, fishing from a boat really has a lot of strengths. Let's try to list at least some of them:

You can explore any promising area on a body of water. The entire water area is accessible to fishermen.
There is no need to use long-range gear.
It is possible to move the bait along different trajectories, as well as to fish hard-to-reach areas - snags, flooded bushes, bays surrounded by grass, etc.
The fisherman becomes mobile. Especially if the boat has a motor. Then just a couple of minutes, and now he is already throwing the bait at a new promising place.
All necessary tackle and fishing accessories are at hand. At the same time, you do not need to carry them on yourself, as when fishing from the shore.

Fishing from a boat has several advantages over fishing from the shore.

If we talk about the disadvantages, then these are additional expenses and the need to transport excess cargo. After all, even a rubber boat when folded will take up a decent amount of space in the trunk of a car. Aluminum or fiberglass models will have to be transported on a trailer.

Lures for autumn pike jig fishing

Pike is a greedy and aggressive fish. She can attack any object that comes into her field of vision. True, this does not mean that the predator will be caught equally well on any bait. Each body of water has its own specifics and local underwater inhabitants have their own preferences.

The most popular lures for catching pike with jigs in the fall are all kinds of “rubber”. Most often it is customary to use classic vibrating tails, which realistically imitate small fish in shape and character of the game.

Photo 3. Vibrotail.

Twisters with a massive body and a voluminous tail work just as well. Such baits make slow, sweeping movements, which pike really like. This behavior of silicone especially turns on a passive predator resting peacefully in a shelter.

Photo 4. Large twister.

In hard-to-reach places, silicone worms show impressive results. A definitely mobile long bait with a small twister tail is of particular interest to pike.

Jig in late autumn, when the water has cooled significantly, also involves the use of foam fish. This type of bait is unusually catchy in the cold season. Often, if the pike completely ignores the usual silicone, then it will certainly respond to products made from this material.

Don’t forget about front-loaded spinners. These baits are good on a clear bottom, when you need to quickly fish a fishing area and detect active pike. They can be carried out either stepwise or evenly.

For pike, a steel or tungsten leader is required. Despite the fact that the leash is clearly visible in the water, the pike attacks the bait, but it will no longer be able to bite the fishing line and the chances of pulling out a trophy will be much greater.

It is advisable to keep the clutch adjusted so that when a large fish bites, it does not have a chance to break off part of your tackle and you would be calm about the safety of fishing. The clutch should work with increased tension on the fishing line, but you need to take into account the pull of the fishing line precisely to the perpendicular tip, and not from the reel to the rings along the spinning rod (in the first case, it will take much more effort to start releasing the fishing line, and the clutch must be adjusted to this force).

Use strong knots to tie lures, carabiners, and sinkers. This will ensure that you don't lose part of your rig in an awkward situation. Here is an example of a very strong knot for attaching the above equipment parts (the knot is called a Uni Knot):

Spinning for jig - what the rod should be (action, test, length) and other parameters in our guide to choosing gear.
How to choose a spinning reel - our comprehensive guide on all the options.
Chinese reels - advantages and disadvantages in this short review.

Jig fishing involves fishing the bottom layers of water and any poke of fish should be on the tip of the angler's rod. Choose gear and do the wiring so as not to miss this very bite - then you are guaranteed success.

Tackle for catching pike from a boat

To catch this predatory fish from the shore, various spinning equipment is used. In principle, if you plan to fish for pike from a boat, you can also use all kinds of gear and bait. Including:

jig;
spinners;
wobblers;
balancers;
poppers, etc.

For all of the above options, pike can be successfully caught using a spinning rod from a boat. The main thing is to choose the right form. What's the best way to do this? Again, proceed from the fishing method, the conditions of the place chosen on the reservoir and the type of bait.

For example, for jigging, rods must have a flexible and responsive tip. Therefore, fast construction models are a priority.
For small spinners and wobblers weighing up to 5-6 g, you will need an ultralight or light spinning rod.
For those who like twitching (a method of fishing with wobblers combined with jerking), it is better to take hard forms. But at the same time, fast construction.
To fish for large pike from a boat you will need a strong spinning rod. It is important that he has a test up to 30-40 g. In this case, “sticks” of medium action are preferable.

There are no special restrictions on the choice of bait when fishing for pike from a boat.

If we talk about the optimal length of the fishing rod, then it varies from 2.1 to 2.5 m. There is no point in using more “elongated” models. When fishing for pike from a boat, long forms only cause inconvenience. And both when casting and when playing. Therefore, a 3 m long spinning rod is no longer recommended.

Fishermen use a boat to catch pike and troll. This method is most effective if the main target is a large predator weighing 7 kg or more. Trolling does not require any wiring. The bait is simply lowered into the water, and the boat, using oars or a motor, floats in the desired direction. Sometimes it’s just going with the flow. At the same time, such fishing requires powerful rods with good test and an average blank length.