How to make a drag net for catching crayfish

Tags: crayfish, crayfish, crayfish

Comments 20

It's good to have cancer!

Guys, I forgot to mention, we catch crayfish from a boat at a depth of 1-2 meters, so there was a need to invent such a device, we also catch it with our hands, but there are stretches where there is no way to get it without a crayfish grip.

Show the video. I don't understand how it works

I’ll definitely attach it tomorrow, everything will be clear.

What is this? Modernized prison?

This is not how they catch crayfish))) but this is straight out of science fiction)

So the future has already arrived, if anyone hasn’t noticed))

Monsieur knows a lot about perversions))

some kind of abortionist) it’s easier and faster to catch crayfish with your hands.

and if the depth is 1.5 m, then this thing is more convenient, it’s been tested.

you can’t hold normal fish with them... fry unless

I stepped on something... it’s a crabgrass))))

if they take her on the water, the fine is immeasurable

DIY children's sled. Instructions

• How to make a sled with your own hands to please your child? It turns out that this is not at all difficult: it is enough to purchase PVC pipes with a diameter of 30-40 mm. Usually the size of such sleds is small (85x45 cm), but can also be designed for an adult (180x75 cm). Cut the pipes into pieces of the required length. Sand the cut edges with sandpaper.
• Connect the pipes at right angles using a soldering iron, metal angles and screws or fittings.
• Similarly, make 5-7 crossbars and install them perpendicular to the long sides of the frame.
• Mark the long sides of the structure for the posts that will connect the frame to the runners. The optimal number of racks is 5-7 pieces on each side. Install them in increments of 10-15 cm. The length of the parts should be about 20-30 cm.
• For runners you will need a pipe of a larger diameter (110 mm) and a longer length (150-220 cm). Using an angle grinder, cut it lengthwise into 2 pieces. Heat the workpieces with a technical hair dryer and give them a flat shape. Bend the front parts of the runners at an angle of 60°. To ensure a strong connection, use metal corners to mount skis.
• Cut a seat from plywood to the shape of the frame, sand it and secure it with self-tapping screws.
• Equip the sled with sides. They, like the runners, are mounted on small racks and connected in the same way as the frame.

Tips for Beginners

We advise you to listen to our tips and recommendations, they will help you catch more:

1. If you find a female in the crayfish trap after being lifted onto the ice, do not rush to add it to your catch or release it. It is better to put it back in the net and lower it to the bottom - this way it will attract even more males, this method has been tested.
2. Load 3-4 types of different bait into different gears and leave. After a couple of hours, compare the results and fish with the bait that brought more crayfish.
3. If you are using fish, make several cuts on it before immersing it - this will release the smell more intensely.
4. Contrary to the general belief that carrion is the best bait for crayfish, use it with caution. It is not always a favorite; a lot depends on the time of year and the specific body of water. Always experiment.

Gear and methods

There are reservoirs in which crayfish remain active almost the entire winter season. This is due to the presence of warm water in the bottom horizon and suitable bottom topography, where they build shelters. You need to look for crayfish in winter at those points where the water maintains a comfortable temperature until the most severe frosts.

Perhaps these are areas where warm springs flow at great depths. And although there are relatively few such reservoirs, they still exist. There, cancer continues to manifest itself almost throughout the winter, and it is found everywhere, with the exception of small areas less than 1 meter deep.

If there are no springs or other sources of warm water, the crayfish begins to hide in shelters at great depths. Males stop showing activity, and females intensively collect food and stock up on the necessary energy before the upcoming spawning.

The list of the most promising places where you can find crayfish regardless of time includes the following areas:

1. Contrasting relief with significant differences in depth.
2. Muddy, silted and not very clean bottom.
3. Rocky shore and clay bottom.
4. Areas with shallow depth, but a clean and rocky bottom.
5. Deep holes.
6. Large cramps.

If in the summer the main part of the crayfish’s diet is plant food, then in winter the animal turns into an avid predator who loves to hunt small fish. During this period, he is interested in roach, bream and silver bream, and the meat of pike or perch is not a valuable find.

The main thing to remember is one feature: with the arrival of cold weather, which causes a decrease in water temperature, the smell spreads throughout the water column much worse than during the warm period. Of course, if in summer a crayfish could attack even a living fish, noticing it from a long distance, then in winter it has difficulty paying attention even to dead, stale prey.

When trying to understand how to catch crayfish in winter, it is important to pay due attention to the choice of gear and fishing methods. With the arrival of winter, the range of possible adaptations is significantly reduced, which is explained by the appearance of an ice crust on the reservoir and a significant change in the lifestyle of animals.

A drag net for catching crayfish is a fairly catchy version of winter gear that gives good results in open water. The design resembles a kind of mesh bucket that needs to be pulled along the bottom in promising places where crayfish can live.

When making a dredge for catching crayfish with your own hands, you need to take a metal wire, on the basis of which a rectangle with a diameter of 0.8-1 cm will be created. Then a mesh with a bag with many small cells will be stretched over this blank. A cord is tied at the top.

The next steps remain very simple, because all that is required of the fisherman is to throw the dredge into the water column, and then lift it up at a certain speed, repeating such manipulations until the first prey is caught.

A significant advantage of the tackle is its casting range. An average person with good physical characteristics can throw a dredge at a distance of up to 50 meters without much difficulty.

Another unique device that allows you to catch crayfish in winter is a twist. And although the method is considered a relic of the past, some people still actively use it. To create a structure, just take a metal wire and attach a hook to one end and bend the other. Such manipulations will provide the trap with better rotation.

Homemade snowmobile sled made from plastic pipes

Polypropylene or PVC pipes can serve as material for sleds. The design will be lightweight and suitable for any snowmobile. The connection of individual elements is carried out with a soldering iron. The load-carrying capacity of the structure will be small, since the plastic tubes will not withstand heavy loads.

Pipe blanks are cut to size according to the drawing

First you need a drawing. It's simple. The design consists of two curved runners that act as skis. Vertical posts extend from them, which support the main platform.

According to the dimensions of the snowmobile sled indicated on the drawing, blanks are cut from the pipe with your own hands. Prepare shaped elements for soldering. Heat up the soldering iron. From the shaped elements you will need tees and 90° angles. On skis you will need to bend the edges. This can be done by soldering 45° corners. However, the disadvantage of this method is that the soldered fitting has an edge with which the skis can cling to obstacles on the track. You can go another way. Avoid soldering the corners and bend the PVC tubes to the desired angle, after heating them with a hairdryer.

You can give the pipe the desired angle using a hair dryer, heating the area required for bending

After cutting the tubes, begin soldering. First, clean the edges of the workpieces. Nozzles are inserted into the soldering iron. Install the fitting and pipe section. When the plastic softens and begins to melt, the blanks are removed from the hot nozzle and joined together. All elements are collected in a similar way.

The fittings are joined to the pipe using a soldering iron.

READ ALSO: Frequent mistakes when welding polypropylene pipes

The skis are assembled first. They consist of three paired pipes. Tees are soldered at equal intervals along the runners. Racks made of pieces of pipe are attached to the central outlet of the fitting. Their upper end is connected with jumpers using tees and pipes. They form the platform of the future sleigh.

Stands with jumpers are soldered to the runners from pieces of pipes and tees, forming a sleigh platform.

A rectangle is cut out of plywood according to the size of the platform contour. To make the seat soft, the blank is upholstered with an old blanket or foam rubber, and covered with leatherette on top. The platform is secured to the jumpers with overhead clamps or bolts through pre-drilled holes in the tubes.

Drag for catching crayfish photo

Dragging, nonsense, fighting. So many names, but all about one tackle and a type of exciting, gambling fishing - collective, fun, with many memorable moments and at the same time requiring anglers to have knowledge and skills for successful fishing.

In terms of its properties and design, with some differences, it is simply a seine. Fishing method and various design solutions:

• the net is cast from a boat or vessel, the drag is stretched and pulled by people;
• differences in the depth at which fishing is carried out. You can fish with a drag line only in a place where the fishermen pulling it will pass. The seine is used at various depths;
• the length of the nonsense is a maximum of 50-70 meters. Although dragging such gear will not be easy. Its optimal length is 30 meters, for wide rivers, lakes and sea waters. And then it is more often used on ponds, for drifting along the shore. The length depends on the body of water and the strength of the anglers.

Exceeding the permissible load on the server 4. Migration within the network infrastructure For questions related to account blocking, please contact support. About the company About the company Data Center Documents Agreement Knowledge base. Servers VDS servers Dedicated servers. Home Help Login Registration. How to make a drag net for catching crayfish? In the months that do not contain this ringing letter - from May to August - crayfish breed, molt, and catching them at this time is a crime against nature. A crayfish is considered commercial when its length from the middle of the eyes to the tail plate is at least ten centimeters.

How to make a drag net for catching crayfish? — page 1 — Others — Bakhmut (Artyomovsky) forum

This is how he grows by the end of the third year of life. Catching crayfish is not a difficult task. It is enough to have a crayfish trap that you can make yourself. The simplest and most common - two rings of steel wire with a diameter of 50 and 30 cm are connected to each other, best by welding, by three spacer rods, also made of steel wire with a diameter of mm. The entire structure is covered, with the exception of the small ring neck, with a mesh with small cells. Cords are tied to the small ring in three places and connected together, about a meter from the crayfish trap.

Recommendations

The optimal type of homemade sled for constant use will be cargo models, and to increase the rational use of the design of such a base, it is equipped with railings and a closed box is made. At the same time, the skeleton is reliably sheltered from any unfavorable conditions. The selection of materials for homemade sleds must be carefully approached; the service life of your product depends on them and components. It must be remembered that the sled is used in winter, therefore, it must be resistant to low temperatures. It should also be taken into account that during operation the structure is subject to impacts from protruding tree roots or small stones, and therefore must have an impact-resistant surface.

Dredge baits

If you want to catch crayfish with a dredge, you need to pay special attention to the choice of catchable baits. It is unlikely that a crayfish will swim into a trap if there is no bait in it or nearby, or if it does not like the food offered.

Without a doubt, the best winter bait option is a small fish. As already mentioned, the fry needs to be slightly cut, otherwise it will not emit a specific smell and will no longer attract crayfish.

The use of dredges for winter fishing is becoming very popular for a simple reason. Unlike some other methods, this option increases the comfort of the process, relieving the angler of the need to climb into icy water.

Application of crayfish traps

As for the classic crayfish, it can also be used directly from the ice. The choice of configurations, shapes and types of gear is quite extensive. The simplest of them is similar to a malyavochka and differs only in the presence of additional walls made of metal mesh.

The operating principle of the crayfish is very simple and understandable: a suitable bait, usually of animal origin, is placed inside the structure, and then it is placed at a promising point on the reservoir. Having felt the pleasant smell, the crayfish will swim into the crayfish trap on its own. As a result, he will find himself trapped with a reverse slope of the wall, from which he will no longer be able to escape.

Another common option is called “merezhi” and is somewhat similar to a mesh cylinder with several stiffeners. The prey enters such a shell from both sides at once through holes in the side. You can also find semi-cylindrical and triangular shells on the market.

Necessary materials

What are skis for a snowmobile sled made of? Let's consider the construction of a simple version of a snowmobile sled from a metal pipe. In order to make such a design, you will need:

• profiled metal pipe 20×20, wall thickness - 2-3 mm;
• round plastic pipes for making skis;
• Metal sheet;
• plywood sheets 10-15 or more millimeters thick.

A sled with a metal frame is much more reliable and durable than structures made from plastic pipes.

Their disadvantage is their greater weight, but they will serve for a long time and without failure. The only thing that may be needed when operating such a design is periodic replacement of plastic skis, which will wear out over time or may be damaged when hitting rocks and roots.

The principle of operation of the healer

Another popular tackle that can be used to catch crayfish is the crayfish. Like previous devices, it is made of durable mesh and has a cylindrical shape. The base is a metal hoop, the diameter of which is about 50 centimeters.

To weight the structure, a suitable load is placed in the center, for example, a stone or a heavy sinking object. Then 3-4 cords of small diameter with the same length are tied to the hoop, which will prevent the hoop from skewing when lifted from the bottom.

To connect the cords, special knots are used, to which a cord is tied, which acts as a lowering and raising trap. The bait is tied to a mesh stretched over a metal base.

After the gear is equipped, it is placed at a promising point and then checked after a certain period of time. Some craftsmen improve the trap by equipping it with an additional metal image.

Preparation

Before we start creating our winter structure, we need to decide what material it should be made of. Wood is perfect as a starting material if you want to make a sled like a sled or entirely made of plastic or metal with plastic parts. There are a lot of homemade models you can assemble. Sleds, thanks to their design solutions, are a very universal item; they can be easily attached to all models of snowmobiles. To optimally select sled models, consider these factors.

1. Travel route and terrain features. The factor must be taken into account when using drag-type structures.
2. Type of transportation. Taking into account the fact that not only heavy things are transported on sleds, but also people, this factor must be taken seriously.
3. Your driving style. This factor must be taken into account, since the service life of all equipment, and not just sled runners, depends on the riding style.
4. Amount of snow cover. This factor affects the maneuverability of equipment in difficult natural and weather conditions.

The best option would be to make a sled on a steel frame, as it will be more durable than plastic ones. The main disadvantage of such equipment is considered weight, however, this pays off with a significant margin of safety and a long service life.

In such devices, it will be necessary to change the plastic slides as they wear out, but at least once every three years.

Dimensions and drawings

Before preparing your masterpiece, you need to make a design for it, in which you need to constructively decide what size the sled will be. We have prepared a rough drawing of the sled, which we will describe later. As you can see, the dimensions of the structure are a little more than two meters in length, the height of the product is 98.5 cm, the width in the front part is 75 cm, and in the back it narrows to 74 cm. The drawing is very detailed in the height of all parts. Drawings can be found on the Internet, but it is better to come up with your own based on your technical considerations and calculations.

Tools and materials

To make a snowmobile sled yourself, you need to stock up on the following materials:

• steel sheet;
• metal tubes with a cross section of 20 by 20 mm;
• PVC pipe;
• sheet of plywood 1.0-1.5 cm thick;
• welding machine;
• milling machine;
• hacksaw;
• grinding machine and other necessary tools.

Snowmobile sleds are made from any available materials, not just those purchased specifically for this purpose. Craftsmen can make a sled from a motorcycle carriage or a sled from wood, and some craftsmen even make sleds from barrels.

Searching for crayfish in the warm season

Unlike the winter season, crayfish are caught in a variety of ways in summer and early autumn. Some people prefer to take them out of their holes with their bare hands, although this is not entirely safe, since the hand can get stuck in the hole or end up in the crayfish’s claws.

The most common gear for warm weather are crayfish and crayfish, which allow you to get several dozen trophies from the depths in one cast. And the fishing process itself is considered passive and very comfortable, without any complex manipulations or tricks.

In winter, little changes, except for the need to use more aromatic pieces of fish that emit a specific, intense smell. With this approach, going out onto a pond will bring success regardless of the time of year.

Cargo homemade sleds for snowmobiles

A special feature of cargo sleds is their resistance to heavy loads. This is achieved by using durable materials, such as metal. Skis are made wide. Due to this, the runners do not fall into the snow. Improves maneuverability and stability when the snowmobile moves at high speed. Shock absorbers are sometimes provided between the runners and the platform frame. They smooth out impacts on bumps. The sled bounces less, which reduces the likelihood of damage or loss of cargo.

Shock absorbers smooth out impacts when riding a snowmobile on uneven terrain, thereby improving cargo safety

READ ALSO: Connecting a washing machine to water supply and sewerage!

The snowmobile sleds shown in the photo are made from metal with your own hands. The platform is covered with plywood. The sides are welded from tubes. They won't interfere with cargo sleds. It is convenient to secure the transported cargo with straps over the sides.

Tips for a newbie

To prevent the search for crayfish in the winter from being unsuccessful, you need to adhere to the basic rules and recommendations. Among the most useful tips are the following:

1. As bait for catching crayfish in winter, you can use ordinary black bread, inside of which pieces of garlic are placed. This type of bait is considered in demand for a simple reason - getting fish fry or any other living creature in the cold season is problematic.
2. When using live bait, before lowering it into the trap, you need to slightly cut it, piercing the air bubble and rubbing the body with a brush of increased rigidity. You can also use dead fry for bait. A good alternative for fish is crushed clams, but finding such bait is problematic.
3. Residents of different bodies of water can exhibit unpredictable behavior, so you need to study all the features in advance to avoid difficulties in the future.

Calling winter a good time for catching crayfish is problematic. But if you weigh the pros and cons, show a little diligence and ingenuity, then going out on the ice can become quite a productive activity.