Rating of PVC boats for motors


Criteria for choosing a PVC boat for a motor

Most fishermen have the following requirements for a PVC boat:

  1. Reliability. The boat must be strong, safe and durable.
  2. Possibility to install a good motor. Most boats on sale limit the power of the installed motor. The speed of movement across the reservoir and the possibility of going on planing depend on this.
  3. Ease of use. When folded, the boat should fit into the trunk of a medium-sized car. It is convenient to inflate and deflate, wash, and transport to the fishing spot.
  4. Accessories. It is very useful if the kit includes a comfortable seat with a backrest, an eye for an anchor at the bow and stern, a pair of oars with oarlocks of the proper quality, a holder for rods and other accessories.
  5. Price. One of the main selection criteria for most fishermen.

Of course, it is impossible to satisfy all the requirements at once, and it is worth dividing all the boats into groups.

Types of PVC inflatable boats for fishing

They can be divided into three groups:

  1. For large water areas and overnight fishing
  2. For small water areas and one-time trips
  3. Budget option for a low-power motor

PVC boats for large water areas are large in size and must be able to go on planing. They take a long time to assemble, are equipped with a powerful motor, and behave steadily on strong waves. Designed for two or more people with massive luggage. They must be very reliable, since a punctured cylinder two or three kilometers from the shore is dangerous to the lives of fishermen.

Their main disadvantage is their large mass, they take a long time to fold, and are difficult to transport from the car. Therefore, they are often inflated before fishing and taken to the reservoir already in an inflated state. Or for this they use an automatic pump that runs from the car’s cigarette lighter.

A PVC boat for small water areas and one-time trips is used near the shore. It should take up little space when folded. It is moved to a body of water by hand or inflated directly near the water area. However, it is subject to the same requirements for material strength as for large water areas. Often in small water areas the shore is littered, and in the water the bottom can be pierced by aquatic vegetation. And there is always a chance to run into a snag near the shore.

Such boats do not always require registration with GIMS. According to the rules, the motor power according to the passport should not exceed eight kilowatts, and the weight of the boat together with the motor should not exceed 200 kilograms in order to avoid the registration procedure. These conditions are quite sufficient for such a boat.

Read more: About registration in GIMS

Budget PVC boats with a small motor are not designed for planing. Usually it is bought without a motor, if it is not possible to buy everything at once, and is used with oars. Then the angler has the opportunity to install a low-power motor, and it is used as an auxiliary tool. It will still be easier and faster than rowing, especially against the wind or current.

Which motor to choose for a PVC boat

To achieve confident planing, it is necessary that for every thirty kilograms of weight of the entire structure, including the fisherman, luggage, the boat itself and the engine, there should be at least one horsepower of the latter. And it’s better to have two, since at minimum power the planing will be with the nose too raised up, which is very inconvenient to control and slower in speed. Most outboard motors can be overclocked to slightly above their rated power. However, we must remember that a boat designed for a motor of a certain traction force is designed for that without taking into account acceleration.

If the length of the vehicle is up to 2.7 m, then it is necessary to install an engine with a small cylinder volume of 43 - 130 cm3, with a power of 2 - 3.5 liters. With. and weighing 11 – 26 kg. The maximum engine power for such a vessel is 5 hp. With.:

  • The optimal motor power for a three-meter model is 10 hp. With.
  • For a four-meter boat - a motor with a power of 15 - 20 hp. With.
  • If the size of the vessel is more than 4 meters, then motors with a power of 30 hp are already applicable here. With. and weighing from 60 kg.

How to choose the right motor for a PVC boat

How to choose an outboard motor for an inflatable boat - tips and videos

We invite you to watch a selection of videos on the topic “Boat Motors”. It doesn’t matter whether you are buying a motor for the first time or have decided to change an old one, this video will help you decide on the choice of outboard motor. Today, manufacturers from different countries have filled the market with a huge number of all kinds of models, without certain knowledge it is very difficult not to get confused in this assortment and not make a mistake.

Surely everyone would like to buy a boat motor that is more powerful, and cheaper, and that is not very voracious, and, of course, would serve you for many years.

In this video collection, experts will tell you how to choose the right boat motor, what you need to know and what you need to pay attention to when buying. Essentially, there are several factors that need to be taken into account when deciding what kind of motor you need.

Content

engine's type

There are two-stroke and four-stroke engines. Four-stroke engines are larger in size and weight and more difficult to operate, but they consume much less fuel and when using them there is no need to mix gasoline with oil.

Two-stroke engines are easier to operate, and they also have an important advantage - if they break down, you don’t have to take them to a specialized workshop; they will be repaired for you at any moped and motorcycle repair shop. Many owners of two-stroke engines cope with the repair task quite well on their own, and you can do it too if your hands grow from the right place and are not crooked.

Engine power

It depends on your appetites. For some, 8 horsepower will do, but for others, 15 is not enough. It is important to know that the greater the engine power, the greater the fuel consumption, while the speed of the boat increases slightly, but the consumption is quite noticeable.

How to choose an ice screw for winter fishing: types and main technical characteristics

For example, if you take a 10 hp motor, then the speed will be 25-35 km/h on a glider, if there are 2 people in the boat, but if you take 15 hp, then the speed will increase slightly - by 2- 3 km/h, but the consumption will increase significantly.

Engine weight

On average, boat motors produce 8 hp. weigh 35 kg, but a motor for 2 horses will weigh only 10 kilograms. Here you need to take into account how the motor will be transported in the future, because the device is 15 hp. It's quite difficult to lift alone.

In general, you should approach the choice of a boat motor seriously, but you won’t be able to save much here, because a good motor is quite expensive, but, as they say, the miser pays twice. We advise you to watch the video that we have prepared for you; we really hope that it will help you with your choice and you will become the happy owner of a boat motor, the one you needed. Choose the right boat motor!

Alexander

Hello, I'm Alexander, the mastermind behind the blog. In terms of career and free time, I connected my life with the forest. How could it be otherwise when you live in Karelia! In this blog, I am responsible for sections dedicated to hunting, hiking and equipment. Welcome to my world!

Rating of the TOP 5 best PVC boats for motors

Review of the best models of PVC boats for motors:

  1. Mercury RIB 420
  2. Gladiator RIB 420
  3. Navigator 400 NDND
  4. Frigate 300 EK
  5. Pelican 245T

№1 Mercury RIB 420


The Mercury RIB 420 PVC boat is designed for large expanses of water. It has a hard bottom that you can fish on while standing without worrying about it getting punctured. Planes well and holds course. It has a lot of accessories for the fisherman, eyes, seats, lockers, steering. Unfortunately, fishing from standard seats will not be very comfortable; it is better to purchase additional inflatable ones with backs. Cockpit length 290 mm, width 90 mm. The maximum engine power that can be installed on it is fifty horses. When folded, it can be transported in a regular trailer. To use this boat with a motor, you will need to register with GIMS and have a license.

Typemotor
RIB boatEat
Number of seats7
Boat materialreinforced PVC
Transombuilt-in
Maximum motor power40 hp
Load capacity750 kg
Number of air compartments3
Keelhard
Bottomhard
Bottom materialfiberglass
Colorgrey

Dimensions and weight of a PVC inflatable boat for a Mercury RIB 420 motor

Weight125 kg
Cockpit width90 cm
Boat width188 cm
Cylinder diameter55 cm
Cockpit length290 cm
Boat length480 cm

PRICE: 212,000 rubles

Mercury RIB 420 review video

Read also: Choosing a PVC boat for fishing

№2 Gladiator RIB 420


PVC boat Gladiator RIB 420 is approximately the same dimensions, but with less functionality. Designed for large water areas. For three or four anglers, the carrying capacity of 750 kilograms is more than enough, and you can go on vacation to an island in the lake, taking everything you need with you, or even travel along a wide river. The cockpit parameters are approximately the same as for Mercury at a price that is one and a half times less. In terms of equipment, everything is a little poorer - there is no steering, only two benches. However, a steering wheel is often not required, because you can control the movement using the tiller while sitting on the stern - this can be much more convenient for the fisherman, especially when trolling.

Typemotor
RIB boatEat
Number of seats7
Boat materialreinforced PVC
PVC density1 100 g/m2
Transombuilt-in
Maximum motor power40 hp
Load capacity850 kg
Number of air compartments3
Keelhard
Bottomhard
Bottom materialfiberglass
Colorgreen, blue, camouflage, white-blue, red-black, light dark gray, dark gray, yellow-blue
Boat length420 cm
Weight127 kg
Cylinder diameter41 cm
Boat width200 cm

PRICE: 143,000 rubles

Gladiator RIB 420 review video

No. 3 Navigator 400 NDND


PVC boat Navigator 400 ND of domestic production with a low-pressure inflatable bottom.
When folded, it can be placed in the trunk along with the motor. A good option for those who decide to go fishing together in a small area. Read also: Rating of PVC boats with NDND

Allows you to install a thirty-horsepower engine, but has a small dead weight. Thanks to this, it can be used without registration with a motor of up to eight kilowatts - that’s about ten horsepower. Has a built-in transom, benches and oars with oarlocks included. The PVC for this boat is extra durable, which reduces the risk of punctures.

Still, it is safer to use boats with a hard bottom as a glider, and these are more suitable for normal sailing. Inflating this boat can take a long time. It will also take a lot of time to wash the inflatable bottom after fishing.

Characteristics of the boat Navigator 400 NDND:

Maximum length cm:400
Maximum width cm:187
Cockpit length cm:280
Cockpit width cm:81
Balloon diameter cm:48/53
Passenger capacity (persons):5
Boat weight (kg):48.5
Load capacity (kg):850
Recommended motor power hp:9.9
Maximum motor power hp:25
Bottom type:NDND
Number of compartments:3+NDND
Density of PVC used (g/m2):1100/1100
Type of seam on the boat cylinder:Weld seam

PRICE: 57,000 rubles

Inflatable boat NAVIGATOR 400 video presentation

No. 4 Frigate 300 EK


PVC boat Frigate 300 EK with a small carrying capacity and price category, with a non-inflatable bottom.
Capable of carrying a weight, including the weight of the motor and luggage, no more than 200 kilograms. According to the passport it is more, but it is better not to overload such boats a little. Allows the use of engine power up to eight l/s, but it is also better to limit it to five. Naturally, it is not intended for planing. It has a built-in transom, two cans included, a folding floor, two short handrails and oars with oarlocks. Due to its low weight, it can be carried alone, along with the motor and things, from the car to the shore. It is quickly brought into working condition; the small volume of the cylinders allows you to pump them up using a pump in ten minutes. A good choice for those who have not yet decided whether to buy a motor, or are still comfortable with oars - it is equally suitable for both.

Characteristics of the boat FRIGATE 300 EK:

Maximum length cm:300
Maximum width cm:150
Cockpit length cm:218
Cockpit width cm:62
Balloon diameter cm:40
Passenger capacity:3
Boat weight kg:30
Load capacity kg:345
Maximum motor power hp:8
Recommended motor power hp:5
Bottom type:Half a book
Number of compartments:2+1
Density of PVC used (g/m2):750/750
Type of seam on the boat cylinder:Weld seam

Price: 22000

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]