ᐉ Catching bream with a ring - ✅ ribalka-snasti.ru

Schematic diagram of ring fishing

The principle of ring fishing is as follows : the complementary food located inside the feeder is distributed along the flow. It is worth noting that the feeder must be connected to hooks while distributing food. In turn, hooks adapted to the feeder are located on the feeding path. As a result, the bream, interested in the train of bait, rushes behind the path, as a result of which it collides with the hook with the bait.

Regarding the technical equipment for such fishing, let’s say that this parameter is quite complex, as a result of which it requires a boat. The vast majority of fishing enthusiasts choose rubber boats, rightly believing that such fishing equipment is not capable of producing unnecessary noise interference when catching bream.

If you want to get an excellent catch, the boat should be positioned perpendicular to the shore . For this purpose, two anchors attached with ropes are cast. After casting, the tackle must be lowered through the side of the boat located downstream.

Float equipment for catching bream in winter from ice

Fishing rod - filly (a miniature reel of absolutely any shape, on which a six is attached, at the tip there is a ring for inserting fishing line).

Line – monofilament 0.12-0.15 when fishing for bream up to 1 kg in weight, 0.2-0.26 for bream larger than 1 kg. It is better to make the last meter of equipment from fluorocarbon fishing line (it is invisible in the water, but less durable, so choose a thickness of 0.25 for a kilogram bream and 0.4 for larger specimens.

How to make ring fishing tackle

It is worth noting that catching bream with a ring is almost pointless if the ring is not made correctly.

Procedure:

To properly make a ring, you will need 100-150 grams of lead, as well as metal wire, which must be bent, as shown in the figure.
A shape is imprinted in clay or earth, the diameter of which should be in the range of 3-3.5 cm, and the thickness should be 0.5 cm.
Next, the mold is filled with molten lead , after which it must be allowed to cool.
Sawing one side in order to put it on the cord, and on the other side we make a hole for attaching the fishing line.
In the slot area, you need to drill two holes , the purpose of which will be to fasten the locking wire.
The next step is to insert the wire into the holes , and then solder it with a soldering iron.

It is worth noting that all procedures for successful production of tackle should be done in such a way that the fishing line from the feeder can be conveniently threaded through the spring . This must be done so that during hooking the ring would easily slide off the fishing line. Regarding the wire, it should be springy and at the same time quite rigid.

Also watch a video about installing a tackle called a “ring”.

Are you interested in night fishing for bream on a feeder? The article will tell you about the main points of catching this fish using feeder gear.
This article will talk about spinning rods for trolling.

Description of the gear

The rod can reach two meters in length. The diameter of the optimal fishing line for this method of catching bream is 0.25 mm. The diameter of the leashes is 0.2 mm, and when choosing the most suitable hook, you should give preference to No. 6. You will also need a spinning reel.

Gear design and proper equipment

There are as many fishing methods as there are fishermen. One of the most popular and effective methods is ring fishing. This popular tackle is suitable not only for experienced fishermen, but also for those who are just starting their journey.

Simple in design and use, the ring gives wonderful results and is not complicated. It is important to understand that such fishing requires you to have a swimming device.

However, for this task, the most ordinary PVC boat will be suitable, long enough to accommodate not only the fisherman, but also all the necessary items. Recommended length is 2 meters. Although some people use a ring for shore fishing, this method is of little use in such conditions and will cause quite serious difficulties. You need a device for double anchoring, for example, a pair of cast iron blanks.

This requirement is explained by the fact that bream is usually caught in bodies of water with a current, and the stability of your swimming device is the key to effective biting. It is recommended to use a long rope at the anchor; the smaller the angle between the boat and the abandoned anchor, the better.

How does this gear work? There are two components, the feeder and the ring itself. There are several types of rings:

Fixed type. The thickness of the ring is from 3 to 5 millimeters, and the diameter is 55-65 millimeters. A hole of 20 millimeters is made in the middle of the device; it is responsible for moving the gear along a cord attached to the feeder. Also, another hole is drilled at the edge at an angle of 45 degrees. As a rule, its diameter varies around 7 millimeters. This is where the fishing line and leash are attached. If the cross-section of the hole is smaller, then the fishing line simply passes through it without being tied. It is important that in this case a swivel is needed to fix the movement of the leash.
Removable ring. To make the ring removable, you need to make a cut. The cut is made on the opposite side from the one on which the fishing line is attached. It is cut at the same angle as the hole for attaching the leash. This solution will allow the ring to fly off the line when you hook the bream. A straight cut can lead to the fact that the lace may come off on its own, without your help. If you encounter such difficulties, a small door using a spring will help. It is important that the door opens outward and not inward.
Eggs . Nowadays, instead of rings, they use a modernized version called eggs. The essence of its design is that two lead balls are secured together with a wire shaped like a pin. Due to the fact that the wire springs the balls, they are pressed tightly and create an excellent groove for the cord. The feeder cord moves between them without any problems, while the fishing line is placed in the wire ring. During the bite, the balls move apart under pressure and move the feeder with the fishing line in different directions.

How to catch

First, the tackle with the feeder is cast , with attention paid to the weight of the feeder, since this parameter should be sufficient, that is, the feeder is quite heavy. Thus, the feeder is filled with bait and weight. A stone of suitable size is quite suitable as a load.

Using a reel, the fishing line is stretched to a state identical to the stretched string, after which a ring must be put on the fishing line. Then the ring is lowered all the way to the feeder. It is advisable to leave the required distance from the ring to the leashes in order to avoid hooking on the feeder.

When biting, you need to make a sharp hook to the side , while tearing off the ring from the guide line. After this, the process takes on a standard hue, since the subsequent technique for catching bream is quite simple.

Where is the best place to catch bream using the ring method?

Fishing professionals advise following several recommendations when choosing a place to fish with a hook . So, it is really important that the bream independently detects you through the trail of distributed food. In this regard, when choosing a place for successful fishing, remember: an effective place for catching bream using a similar technique is 15 meters above the place where the fish are supposedly concentrated.

A quite suitable place for catching bream using the ring method can be a hole or a bend in the bank with a reverse current. In addition, the steep clay banks of a reservoir can be useful, as you can often catch an excellent specimen there.

Are you interested in catching ide with a spinning rod? Our article will tell and show how to catch this fish correctly.
In this article you will learn about methods of catching silver carp in different seasonal conditions.

What to consider when choosing a fishing spot

When choosing a place for ring fishing in winter, you must adhere to the following recommendations:

First of all, the reservoir of future fishing must be familiar, otherwise you can only waste time. As a last resort, ask local fishermen to find out where the best fishing is.
Avoid places littered with snags and sticks, as there will definitely be no fish there.
The lower the water temperature, the deeper the bream will be.
If a river, lake or other body of water is just covered with ice, then fish can still be found at a depth of about three to four meters. Further, as the temperature drops, it will not be possible to detect it at such a small distance from the surface of the water.
If springs gush from the bottom of a reservoir, this may well be the habitat of this fish in winter, since the water there is filled with oxygen.

Baits for bream

Preparing a mixture for bream is quite simple if you know the intricacies of the procedure . In this case, you will need high homogeneity of the mixture, the required cell size intended for complementary feeding, and the density of the complementary feeding itself. It is worth noting that complementary feeding must be deepened without any associated “waste” for subsequent erosion by the current.

In fact, you can stuff your tackle with almost anything that can attract bream. Thus, millet porridge, a mixture made from crackers, and store-bought bait are quite suitable as a feeder filler.

In order to make the feeder attractive enough for bream, you need to use a liquid flavor, which can be artificial or natural, as well as bloodworms.

It is advisable to first degrease the bloodworms using soil. As a result of such actions, the larvae become more mobile, so to speak, come to life, sensing their natural habitat.

Procedure for filling the feeder:

A load must be placed at the bottom of the mesh;
Following,. What needs to be done is to cover the walls of the trap with bread crusts. Bread crusts serve to ensure that the contents of the feeder are washed out in portions during the fishing process under current conditions;
The next step is to place the rolled bread balls, placing them inside the so-called bread “container”.

Fishing for bream in winter with a ring, or which season is best suited for this method of fishing

The method under consideration is most effective under the conditions of the required flow. However, if there is a calm on the reservoir, ring fishing loses its effectiveness. Useful advice is that there is no need to catch bream with such gear in weather conditions when the air temperature drops below zero . Fishing for bream in winter with a ring is undesirable due to the icing of the boat and all the elements attached to it.

It is necessary to focus on the fact that the fish in question - bream - is a so-called bottom lodger, and therefore it tries to avoid shallow waters. However, in conditions of a sufficiently intense current, a representative of the fish world can swim to shallow riffles to feed. An excellent technical tool for detecting bream in a river is an echo sounder . Regarding the time period of the day when bream is most active, the time range is between 16:00 and 20:00.

Useful advice for novice fishermen : after catching a bream, the fishing line should be wiped thoroughly, since the caught fish produces mucus, which, in turn, scares away other representatives of the fish world.

If you adhere to general instructions and recommendations coming from experienced professionals in the fishing world, and also have the necessary information on this matter, the likelihood of a successful catch will be much higher!

This article will show you how to properly catch dace in winter.
In this article we will tell you how to catch bream in winter.
There is still a lot of interesting and useful information on our website about catching different types of fish.

Lures and lures for catching bream

Given the seasonality, the diet differs. Therefore, it is worth preparing various baits and baits.

Spring.

Maggot is a classic summer and spring bait for bream

In the spring, bream eagerly rushes to: maggots, bloodworms, caddis flies or worms. In other words, you should choose animal bait, taking into account the saturation of the reservoir. For example, if the creek is full of maggots, then the bait should be chosen accordingly. To catch a trophy, a worm is suitable. But the water must warm up. When spawning approaches, we switch to using plant baits and lures. The roles played are: pearl barley, peas, canned corn or semolina porridge. The effect will not decrease when using artificial bait - polystyrene foam, dough pellets. In bait you can use various types of cereals, as well as components containing sugar.

Summer.

In summer, bream is caught using baits of various origins. Practice shows that fish willingly agree to maggots and worms. Moreover, it works in different areas of water, only one option. You need to take two baits at once and find out through experimentation.

Autumn.

As the autumn months approach, bream begin to gather in schools to feed together before the onset of the winter period. At this time, you need to take all possible baits with you and experiment. Often. The fish is capricious, and the bite becomes uncertain.

Only large bream are consistent - they always go for the worm. Properly prepared bait, which contains a high content of protein substances, also plays an important role.

Winter.

During the winter months, bream are very weak. Therefore, you need to choose soft baits: maggots, bloodworms, steamed pearl barley or dough.