Spinning rod for long-distance casting: characteristics of differences between models

There are many factors that influence the choice of gear in specific conditions. Choosing which spinning rods are best for long-distance casting takes into account the length, test, fishing location, formation, type of guide rings, etc. Typically, a coastal spinning rod is used for long-distance casting, which helps to catch distant, promising areas for fish. When fishing from a boat, it is not advisable to use long-range gear, since it is possible to take any comfortable position at a distance of up to 30 m from the fishing spot.

When is long casting necessary?

Content

During coastal fishing, the angler is very limited and does not have the opportunity to fish at a great distance from the shore. Even a spinning rod is not capable of providing sufficient range if the rod is chosen incorrectly. When fishing from the shore, the fisherman is deprived of the mobility of movement around the reservoir. With classic gear, you can cast up to 40-50 m, and only if you have a sufficient level of skill and an average rod length.

Spinning rods are useful for long-distance casting from the shore on both small and large rivers.

Spinning for long-distance casting from the shore is useful on both small and large rivers. On streams and rivers with a small channel width, long-range spinning rods allow you to catch fish from the opposite bank. The tactic is especially effective when hunting for cautious fish or when there is no way to get to the shore from the other side. In large reservoirs, trophy individuals are located at a great distance, and deep-sea predators also live closer to the middle of the channel.

In half of the cases of fishing on large rivers, the promising place is located at a distance of 70, 100 or 120 m. It is impossible to cast bait at such a distance unless you use the right spinning rod.

A spinning rod with a float for long-distance casting is designed for fishing:

channel edges;
deep-sea pits;
dumps and rifts at great depths;
long ditches;
flooded trees carried far from the shore or specially brought in the middle of the riverbed.

In such conditions, long-casting tackle is critical to fishing success. Without the right choice of fishing rod, you will have to be content with rare bites of small fish close to the shore. There is no need to talk about trophy fishing near the shore, except during the pre-spawning feast, when the fish are not so picky and swim to the shore in search of spawning grounds.

You will have to be content with rare bites close to the shore without the right choice of fishing rod

Rating of budget models

Shimano Exage Mini Telespin: a reliable and fairly light spinning rod with a length of 270 cm and a test that allows you to fish with both small baits weighing from 7 grams and heavier ones weighing up to 21 grams. The rod consists of 9 sections with guide rings located on high legs. The handle is detachable and made of lightweight cork. When folded, the rod is only 38 cm long and weighs 153 grams. For convenient carrying, the spinning rod comes with a hard short tube.

Shimano Catana Telespin - this Shimano telescopic spinning rod has become a real people's favorite over the years. A convenient 5-6 section rod with a solid cork handle, reliable guides with a length of 210 to 330 cm and a test weight of 10 to 30 grams allows you to catch both small and fairly large trophy fish in various conditions. The weight of such rods ranges from 120 to 180 grams, and the length when folded is up to 80 cm.

Norstream Voyager Telespin is a comfortable and lightweight spinning rod up to 300 cm long and weighing up to 170 grams. Allows you to fish with baits weighing from 5 to 25 grams. When folded, it takes up to 56 cm.

Characteristics and features of long-range spinning rods

To determine which spinning rod is best suited for long-distance casting, it is important to take into account the basic characteristics of the gear. All elements of the gear must be harmoniously combined and improve each other’s long-range parameters.

The important elements are:

coil;
correct fishing line;
suitable test form;
type of bait;
equipment, etc.

How to catch trout using a spinning rod?

The key element is the spinning rod; it has the greatest importance in casting distance.

Many anglers give their own advice on how to choose a spinning rod for a beginner, based on experience. Most fishermen agree that the choice of spinning rods should be made based on fishing technique and the characteristics of the spinning rod.

Main characteristics and description of spinning rod for long casting:

The length of the spinning rod for long casting has the greatest influence on casting. As the length of the rod increases, long-range characteristics increase, the casting process becomes more complicated and the number of suitable places narrows;
build. The correct action gives the necessary rigidity to the rod and allows you to deliver the bait as far as possible;
type of pass rings. With low-quality and narrow guides, the possible casting distance is reduced by 20-50%.

Spinning rod has the greatest importance in casting distance

Many manufacturers have a whole series of sea fishing rods in their assortment, designed for long-distance fishing. Marine spinning rods for long-distance casting are more expensive than the classic versions, but they are more durable and can easily handle fish weighing 10-30 kg or more.

Spinning rod structure

The structure of a spinning rod for long-distance casting is an important characteristic; it is one of the first to be taken into account.

Depending on the action, fishing rods are divided into 3 main classes:

fast action - these are peculiar whips that bend strongly under load, but only at the tops;
medium action causes the rod to bend from the middle of the stick;
a slow action causes the entire rod to bend.

Now a natural question arises: “Which of them has a better effect on flight range?” Professionals and any fishermen with experience note that the best rods are those with a slow action; with them you can cast the equipment the farthest. Due to the ability to bend along the entire length, they give more inertia to the bait, working on the principle of a spring. The main disadvantage is the lack of sensitivity; the fisherman will not be able to perform the hook in a timely and quick manner. Not always good, but slow action requires a greater range of motion.

Medium action rods, which allow long casts of 100 meters or more, require the fisherman to have sufficient experience. As the casting distance increases, the technique becomes more complex. Despite the greater difficulty in handling, they make it easier to perform a quick jerk with a fishing rod.

An important characteristic is the structure of the spinning rod for long casting

The fast action model, which allows you to throw the bait far away, is a professional rod, since it will be difficult for a beginner to master the throw. The rods are quite rigid and do not create the necessary inertia; only many years of training will help you cast the bait in the right direction, at the desired distance and to a suitable point. The main advantage of such “sticks” is high sensitivity and fast hooking.

The best jig spinning rods in terms of price-quality ratio

ST.CROIX LEGEND XTREME LXS76MLXF2

Rating: 4.9

The most expensive and highest quality spinning rod for microjig from American manufacturers, which has become a permanent attribute in the arsenal of not only domestic, but also global professional fishermen. It is distinguished by its low weight and a new formula of carbon fiber used as the basis of the blank. The length of the rod is 2.28 meters, which is why it can only be used for jigging from a boat. The effective test lies in the range from 3.5 to 10.5 grams - a clear hint that the model is designed for catching medium-small predators.

But in terms of ergonomics and operating sensations, the ST.CROIX LEGEND XTREME LXS76MLXF2 can compete with all its main competitors. Together with high-quality fittings from Fuji and a non-slip handle that guarantees a secure hold during fishing, the rod takes the well-deserved first place in the rating.

Advantages

high degree of durability;
availability of safety margin;
complete case;
new formula carbon fiber blank (SC-VI, SC-V);
comfortable shape;

Flaws

extremely high price (evened out by the highest quality).

Norstream Kando 902MH

Rating: 4.8

One step away from the leading position is the magnificent spinning rod for jig Norstream Kando 902MH, the main advantage of which lies in the combination of weighty dough, optimal length for jigs and materials used in production. The model is made of high-modulus UTC graphite, which significantly facilitates the design and, together with the EVA pad on the handle, gives a weight of 175 grams. The length of the rod is 2.74 meters, which allows you to fish not only from a boat, but also from the shoreline, taking into account the good casting distance.

Kando 902MH is designed for bait weighing from 10 to 38 grams with a maximum line load of 4.5-9 kilograms. According to fishermen, the specimen shows its best side, but the issue of high cost inevitably wedges itself into the overall picture.

Advantages

reliable rod design;
presence of a cover included;
the ability to comfortably fish both from shore and on board;
good load capacity;
optimal length and weight parameters;

Flaws

high price.

Banax Thunder 90MXF2

Rating: 4.7

In third place is one of the lowest-budget spinning rods in this category, which shows outstanding results in terms of quality. Banax Thunder 90MXF2 has long been very popular with domestic fishermen, who did not fail to take the model into their arsenal, despite the fact that it is only suitable for catching an average predator. The rod's lure test is 7-25 grams - a good field for improvisation, especially for an inexpensive model.

As for the ergonomic indicators, the two-section handle made of balsa wood deserved special honor from the owners. In general, the Banax Thunder 90MXF2 has a good grip, is pleasant for long casts (even from the shore, since the length of the model is 2.74 meters) and a high degree of sensitivity.

Advantages

low price;
high sensitivity;
possibility of varying baits;
optimal parameters of rod weight and length;

Spinning rod length

The length of the rod is one of the key parameters. Only a long spinning rod will help you make a long cast; with a 2-2.5 m rod you won’t be able to deliver the bait further than 50 m. Long poles provide the possibility of a long swing and increased casting distance by inertial force. The minimum length of a spinning rod for long-distance casting starts from 2.7 m. With such a spinning rod, if you have the skills, you can cast bait at 80-100 m. On rivers with a medium-sized bed, on lakes, in creeks, etc., the distance is enough to catch most places

How to catch an asp using a bombard?

The length of the spinning rod for long casting varies depending on the type of reservoir:

Mostly, plug rods with at least 3 elbows are used as long-range spinning rods. The optimal length is 2.7-3.2 m, they are sufficient for most conditions: any lakes, rivers and reservoirs;
Even longer rods are used when fishing at sea, their length sometimes reaches 4.2 m. Fishing on lakes does not require such a length of rods. Larger models weigh more and are less maneuverable.

Choosing a telescopic spinning rod

In order to choose the right spinning rod of this type, you should take into account a number of fishing conditions, the weight of the bait used, the size of the fish and the type of fishing.

Size of the reservoir and presence of current:

On small rivers, streams, small ponds or oxbow lakes with shallow depths, where there is no need to use heavy baits and make long casts, rods with a length of no more than 2.1 meters and a weight of up to 15 grams are suitable.
For medium-sized reservoirs, sticks with a length of 2.4 to 2.7 meters with a dough of 15 to 30 grams are more relevant.
Long heavy-class rods with a length of 3.0-3.0 meters and a test weight of more than 30 grams are used for fishing at great depths in large deep rivers, large reservoirs, and flowing lakes.

Type of fish:

To catch small predators weighing up to 1 kg (perch, grass pike), use short rods of the light or ultralight classes with a length of up to 2.1 meters and a weight of up to 15 grams.
For medium-sized pike, pike perch, and asp weighing up to 2-3 kg, light and medium class spinning rods with a length of up to 2.7 meters and a dough weight of up to 30 grams are used.
The large trophy predator is caught from great depths with heavy-class rods up to 3.0 meters long and weight over 30 grams.

We recommend reading: The most effective and reliable floats for fishing in currents

Wiring type:

For uniform placement of various spinners, fast and medium action rods are used.
For jigging, fast action spinning rods are used.
When fishing with twitching baits, rigid rods with fast or ultra-fast action are best suited to perform a full jerk retrieve.

Passing rings

The internal diameter of the rings, their quantity, location and quality are of significant importance. The main task of the guides comes down to guiding, aligning and holding the fishing line. In order for the fishing line to fly the greatest distance, the rings should not create unnecessary friction, so the inner surface should be smooth. Despite the imaginary insignificance of the moment, this has a significant impact on the range of the tackle. If the fishing line rubs against the rough surface of 7-9 guide rings, the casting distance will be reduced by half. Minimal resistance is the key to a long throw.

For long casting, the placement of rings on a spinning rod is important.

The placement of the rings on a spinning rod for long-distance casting is also important; they must be strictly in line, without any displacement. If the rings have moved off the axis, excess resistance appears.

What are the best criteria for choosing rings?

large diameter. The largest rings are located at the base of the handle, not far from the reel;
internal inserts. You should pay attention to the material; it should be smooth and strong enough. The best are titanium and carbon inserts;
fastening quality. The rings and the blank must be inseparable; displacement will lead to difficulties in casting and the need for repeated casts;
number of rings. It is best to avoid models with an excessive number of guides, but there should be enough of them so that the line is evenly distributed over the blank and does not create unnecessary stress on the top.

Long-range spinning rod equipment

Choosing a rod blank is a very important process, however, the casting distance is also influenced by other factors, depending on how well the reel, fishing line and bait are selected for them. When choosing equipment, the following points should be considered regarding each element:

Coil. Both inertia-free and multiplier can be used. When using heavy baits, the second one is not inferior in casting quality. But it requires certain skills and experience from the fisherman. If light baits are used, then the first option is more preferable. Moreover, ease of operation makes spinning reels the most popular. When choosing them, you must first of all pay attention to the mechanism for laying the cord; the line should lie smoothly, without overlap, which, when the cord comes off, will slow down the progress and lead to the formation of loops and beards. A protective coating along the spool collar is also desirable, not to mention the fact that there should be no unevenness or burrs, which will not only impair the casting distance, but will also very quickly render the cord unusable.
Fishing line. Preference in choosing this element is given based on experience and the task at hand. Beginners are recommended to use thin braided cords, which have a positive effect on casting distance. You can also use nylon fishing line, although its condition must be constantly monitored. The thickness of the fishing line directly depends on the weight of the bait and the intended catch. So, for long-distance casting of an oscillating spoon weighing 15 grams in order to catch a pike from 2 to 5 kg, a high-quality braided cord with a thickness of only 0.1 mm, having a test weight of 9 kg, is suitable.
Bait type. It may seem that for long casting it is enough to use a large, massive bait, but this is not so. There must be a balance, because the more voluminous the bait is, the more it experiences air resistance, which grows exponentially with speed. This will lead to a sharp drop in the initial impulse and loss of the necessary casting meters. As an example of a good bait for long-distance casting, we can cite jigs, which have a narrow body and have good weight, without losing the quality of the game. However, these spoons are not suitable for all types of fishing and can only be considered as a special case.

Do you have a FisherGoMan self-hooking fishing rod?

Yes

Tips and recommendations for choosing spinning rods for long casts

Not all the rules on how to choose a spinning rod for long-distance casting are listed. It is worth paying attention to:

rod test. Spinning rods for beginners are usually taken heavy or extra heavy, since beginners tend to use baits that are too heavy to make throwing easier. In general, professionals take rods from the middle class, designated in the markings by the letter M. Average test - 10-28 g;
type of bait. The best for long-distance casting are jig heads and spoons. Despite their small dimensions they have significant weight. Light wobblers, balancers, etc. cannot be delivered too far; we can take the length of the fishing rod somewhat shorter, as a test;
type of suitable coil. Most models are adapted for various types of coils. If the spinning rod is in the hands of a beginner, it is better to use a spinning reel, but for an experienced fisherman, the multiplier will show the best characteristics.

How to properly catch pike with a spinning rod?

It takes dozens of casts to practice the correct technique.

How to: How the new type of urban advertising Sign Spinning works

Sign Spinning is a new phenomenon in the field of urban street advertising, which has replaced sandwich students and billboard guest workers. Young people dancing with a huge advertising arrow in their hands can be found in squares and shopping centers. We figured out how to “twist” the pointers correctly to make money on it.

Back in the days of cassettes with “cool videos”, which were passed from hand to hand in the early 2000s, the generation of twenty-year-olds came across videos with enterprising Americans. Unlike their promotional compatriots, dejectedly fiddling with advertising leaflets in their hands, the foreign barkers danced, threw the advertising tool up, twirled and sang. Then Sign Spinning, a new type of “live” advertising, was born in America. “Rotating signs” in the States began out of necessity - most residents drive cars and it was not possible to hand them an advertising leaflet or brochure. So young people with huge advertising arrows in their hands began to appear on roadsides and intersections. After 10 years, the culture of spinning has reached us.

Maria Berdnikova, general director of the agency:

Serious interest from clients appeared three months ago. At first, it was a little difficult to explain in words to customers what spinning is and how exactly it works. After all, almost no one has seen spinners in Russia. Now there is an absolute stir in the places where we play. Passers-by stand in a circle and film. Advertising works and, most importantly, gives positive emotions - people smile, sometimes they even dance on the sidelines with our employees.”

StreLArt is currently the only spinner agency in the city. Its creator, Maria Berdnikova, studied in Los Angeles and often saw spinners in action. Returning to Russia, the idea of creating an alternative advertising agency came naturally. But there was no one here to teach how to spin arrows - we had to call a trainer from America. Now Russian spinners are not inferior to foreign ones in skill.

Maria Berdnikova, general director of the agency:

Most of our spinners are athletes. They are initially in good shape, however, to become a professional they need to train a lot and hone their skills. We learned basic movements, then combinations. And then the guys themselves chose what they would use from this, many add techniques from their sport to their routines, so they get unique routines. There is no difference between girls and young people. Girls, however, attract special interest, and they have already been given flowers right during work.”

Basic movements:

One of the main movements is Basic Spin. A peculiar twist of the arrow in front of you. To learn how to perform such a trick decently, you will have to spend about two months of your time, provided that you practice for several hours a couple of times a week.
The second movement is Bruce Lee. It was named this way because the arrow resembles a nunchuck when fired.
The third main move is the Rocket. The arrow is thrown several meters up, while twisting. The hardest thing here is to catch her back.

Long casting technique

Many fishermen do not know how to make a long cast with a spinning rod after the first unsuccessful attempts, although at first glance everything seems simple. The correct technique has to be practiced over dozens of casts. Almost every fisherman is capable of delivering bait to 60-80 m after a short training. Spinners with experience and skills are able to deliver bait over a distance of 100 m or more.

How to make a long cast with a spinning rod:

Throwing tactics from behind. It is better to throw forcefully over your head. We hold the line handle, gradually lowering the bait by 30-70% of the length of the “stick” and press the line with our finger. We move the spinning rod behind our back and send the bait in the desired direction. When the peak height is reached, but before the line begins to tighten, we release the finger.
Through the side. The technique is used in conditions where overhanging trees do not allow you to throw the bait over your back. The movements are similar, but the cast has to be done with a swinging movement from the side.

Some rules:

It is better to hold the rod with both hands to give maximum acceleration;
It is better to lower the fishing line by 1/2 or 2/3 of the length of the fishing rod;
The angle of movement of the bait should be about 45°.

There is no need to be afraid that the spinning rod will break; it is designed for a significant load and has a safety margin.

Long distance casting technique

Long casting is a very complex technique that requires initial skills and extensive training. You should start at close range up to 80 meters and gradually increase it until the result exceeds the range of 100 meters. There are several casting techniques, each for a specific situation; for long-distance casting, lateral or vertical, from behind the head, are ideal. The first is used if there is dense vegetation along the coastline, the second is used for a clean shore and ensures the longest flight of the bait.

The vertical casting procedure is as follows:

place your leading hand on the reel seat, and grab the second hand closer to the butt part of the rod, this will ensure the best movement of the working part of the rod during the swing and the transmission of power moment to it;
the fishing line is released to half the length of the form;
a smooth but powerful drift of the rod's whip is made behind the head, the fishing line with the bait goes in the same direction;
without allowing the blank to straighten back, the rod is sharply moved forward, while it is necessary to ensure that the line begins to jump off so that the bait begins its trajectory at an angle of 45 degrees relative to the horizon.

It should be noted that novice anglers often have a fear of this type of casting, since it may seem that the rod is about to break. With experience, such prejudice disappears, and in its place confidence comes and range increases.

You should start with vertical casting, and you can train not only on a pond, but also on an area with a large area. In both cases, if the angler has little experience in handling gear, it is recommended to remove the hooks from the baits during training.

Rating of the best spinning rod models for long-distance casting

Rating of spinning rods for long casting:

SHIMANO AR-C XX S904MH is perhaps the best spinning rod for long-distance casting, but it is expensive. Made of carbon fiber, made of three sections. Its characteristics: test - 15-60 g, stick length - 2.85 m, fast action, weight - 240 g.
Norstream Kando 962H has the longest length in the series - 2.89 m. It is intended exclusively for long-distance tackle throws. It is used in combination with various baits, has a test weight of 12-45 g. It performs better when jigging from the shore, due to its high sensitivity and power. Often used on asp.
Daiko Absolute 1002MHXF is an expensive rod for coastal jigging. It is used by most expert fishermen who hunt for fish at ultra-long distances. The length is 3.05 m, and the test is 10.5-42 g. It is durable and sensitive at the same time. It transmits even light bites and allows for instant hooking. It dampens prey jerks well.

With the right long-range tackle and suitable equipment, it will be possible to catch many trophy fish that live at a distance from the shore. One of the factors in a fisherman’s experience is the casting distance of the tackle, so it’s worth starting to develop skills from the beginning of your fishing career.

Originally posted 2018-09-12 10:34:20.

Material selection

The materials for making fishing rods are usually:

fiberglass
composite materials
carbon fiber

The cheapest models are made from fiberglass. They show good rigidity, but their strength is often insufficient and their weight is too high. This is why fiberglass rods are commonly used for feeders.

Composite fishing rods are made from fiberglass, to which carbon components are added for strength.

Carbon fiber rods are highly durable and sensitive, which is why they have become more widespread. But at the same time, they are the most fragile, so they require careful treatment.