Hard bottom - disadvantage or quality
Such models are more suitable for amateur fishing.
And unlike inflatable ones, they have some positive aspects:
- They are compact in terms of transportation. They take up little space in the trunk and don't weigh very much.
- Also, the positive side of such boats, unlike conventional inflatable ones, is the built-in transom, which makes it easier to mount the motor.
- The use of reliable PVC fabric and a durable bottom, made of plywood or aluminum, allows you to stand up to your full height when “squeezing.” At the same time, you should not be afraid that the boat will capsize. And in larger boats two or three people can fish without any problems.
- Such a boat is not afraid of cold weather, and you can use it until freeze-up. The main thing when transporting is not to deflate it, but transport it in an inflated state.
The disadvantages include the following:
- Upon arrival at the reservoir, such a boat must not only be inflated, which is not difficult, but also the flooring must be laid out correctly. This process is quite labor-intensive and it will not be very pleasant to do it in cold weather.
- Only two people can deliver the assembled and inflated boat to the reservoir due to the relatively large weight of the hard bottom.
It should be noted that these are not very compelling arguments to refuse to purchase an inflatable boat with a hard bottom. These two disadvantages are completely solvable with the right approach.
Types of PVC boats with hard bottom
Small PVC boats with a hard bottom can be rowed, rowed with a motor, or motorized. The first type is controlled only by oars, the second option is complemented by suspended transoms and is suitable for installing low-power motors. Motor models are high-speed boats with built-in transoms designed for mounting engines with power from 10 to 30 horsepower.
Small boats with a rigid bottom can accommodate one, two, three, or four oarsmen. They have different shapes, different dimensions and equipment. The lines include fishing, hunting, marine, and hiking models, equipped with everything necessary for the most comfortable operation for specific purposes.
A number of models have a PVC floor filled with water-repellent foam. It increases the stability of the vessel and prevents it from capsizing on high waves in stormy weather. There are boat options suitable for installation of steering and pedal drive.
Classification of PVC boats with rigid transom
The transom on inflatable boats allows the use of outboard motors and often the choice of the latter depends on the type of their manufacture. Therefore, when selecting, the size and design of the boat itself are taken into account, and they are quite diverse.
Particularly significant characteristics of a PVC boat with a rigid transom that influence the choice of watercraft:
- Hull length dimensions and deck options, divided into three options: hard, conditionally hard and soft.
- Making the part of the boat that is immersed in water (bottom). It can be flat, stretched or inflatable.
These design features primarily affect the use of the boat, namely its assembly, transportation and delivery to the place of use.
Speaking about the technical parameters and characteristics regarding the operation of inflatable boats with a rigid transom, they are conventionally divided into the following types:
- ease of assembly and disassembly of the vessel before and after operation;
- necessary conditions for safe storage and possible delivery options to the reservoir;
- requirements for choosing a motor and the possibility of mounting it on the transom.
PVC boats with hard bottom in Moscow
Among the huge range of products on our website, PVC boats with a hard bottom are especially popular. These are powerful devices that can be ordered in Moscow at manufacturer prices. Reliable models of PVC boats with a hard bottom are sold at retail. The conditions for wholesale purchases are discussed individually.
Powerful technology at an affordable price
On our website, PVC boats are presented in a wide range of prices; these are not only expensive solutions, but also budget analogues. The following characteristics are typical for PVC boat models with a hard bottom:
- minimum fuel consumption;
- safe design;
- easy operation;
- high reliability;
- Manufacturer's warranty up to 2 years.
Due to their small dimensions, PVC boats with a hard bottom easily fit in the trunk of a car. They won't take up much space in your garage or shed. They will become an excellent assistant for several hours of continuous use. Efficient and powerful PVC boats are an excellent choice for active outdoor activities (hunting, fishing, tourism), work (patrolling territories) and economic activities. For the convenience of customers, our website contains all the popular PVC boats in Moscow. Each item is described in detail, real photographs and prices are offered. You can select the equipment yourself or use the help of our consultants. If necessary, they will help you compare several models you like or clarify questions regarding technical characteristics, purchase/sale and delivery in Moscow.
Motomarine - a store for lovers of quality goods
The site presents PVC boats with a hard bottom, which are distinguished by high reliability.
To order the unit you like, fill out an application on the website or contact our consultants. These are experienced employees who will help you decide on a purchase or simply tell you about the features of operating PVC boats with a hard bottom. In addition to free consulting assistance, we offer:
- Favorable prices from the manufacturer.
- Regular updating and replenishment of the catalog.
- Promotions, sales and discounts on popular towing vehicles.
- Beneficial cooperation for retail and wholesale buyers.
- Manufacturer's warranty.
With our help, it is very easy to buy powerful PVC boats. PVC boats with a hard bottom in Moscow. Call or leave your number in the feedback form if you have any questions or suggestions for cooperation.
Design features and technical characteristics of boats
Such boats, having a low weight when using outboard motors, allow you to turn around almost on the spot. In addition, they float steadily on the water, having a small circulation radius. If we talk about design features and their inherent technical characteristics, then it is necessary to list some components of inflatable boats with a hard bottom.
Cylinders
In essence, this is the hull of a boat, which technically plays the role of the sides of the vessel. Structurally, they are made as two sealed compartments filled with air, which ensures the unsinkability of the boat.
They are designed so that they do not deform if damaged. This is achieved thanks to spherical or cone-shaped compartments inside them, which are extended in their direction when punctured.
The aft parts of the cylinders, protruding beyond the rigid transom, when planing, give the vessel lifting force, which allows you to protect the outboard motor from water. Initially, the ends of the cylinders were made of a cone-shaped type, but later they began to be made with a bevel towards the bottom.
They are also additionally equipped with special valves that allow air to be released if necessary.
Hard transoms
For some, this word is new, but all avid fishermen know that this is the stern part of the boat, made of a rigid plate. This component is necessary when using outboard motors. If it is not intended to be used, then you can purchase an inexpensive inflatable model without it.
The purpose of this design is to smooth out the dynamic and statistical loads on the boat caused by the operation of the motor, maneuvering and possible vibration. In older models, ordinary plywood was used, inserted into the rear compartment of the boat during use.
But modern technologies have made it possible to abandon this and today adhesive transoms are used, connected by elastic profiles.
Carrying handles
As a rule, they are placed in twos on the stern and bow sides or on the side cylinders.
They have one purpose - the free movement of the boat to and from the reservoir.
Mobility – boat transport
Considering the weight of a boat with a hard bottom, which is relatively greater than that of conventional inflatable models, delivery to a reservoir will be difficult. Even if they have handles, it is still problematic to carry it with two people, and if you drag it along the ground, the material may be damaged.
You can cope with this by installing transom wheels, if such are not provided in the package.
There are lots of different ways to do this. For example, there are two options:
- Rigid attachment to the boat transom. In this case, the wheels cannot be removed and transportation by car will become a little difficult.
- Removable wheels. This is a homemade option and such wheels are attached to the side cylinders or also to the backpack. If necessary, they can be removed and the boat can be loaded into the car without any problems.
Boat design
Boats with a hard floor have an oval or pointed bow, raised above the surface of the water. The vessels are equipped with bench seats, handrails attached along the entire perimeter of the side, have handles for carrying, and loops for tying cargo in hermetic bags. The design of the models includes autonomous inflatable compartments separated by sealed flexible membranes. The boats have drainage devices, valves for pumping and releasing air when the pressure in the inflatable compartments increases on hot days.
Models with a hard bottom, designed for sailing on the sea and large bodies of water, are equipped with keels that provide good directional stability on waves. Motor boats have a compartment at the stern for transporting fuel supplies. The vessels are equipped with rotary or stationary oarlocks with the ability to adjust the height. Vessels are supplemented with eyelets, fenders, bulwarks, water cannons, and water fenders.
Models for fishing are equipped with devices for fixing spinning rods, cup holders, devices for installing echo sounders, and fish nets. Boats for long trips have folding tables, holders for transporting bottles, sewn-in pockets for storing small items, compartments for equipment and food supplies. Alloy versions with a hard bottom are distinguished by an enhanced safety system and are equipped with additional inflatable chambers located under the hull. The design of a number of models includes canopies and ladders for lifting into the cockpit from the water.
Boats are equipped with inflatable cushions, dismountable or solid oars made of aluminum, composite materials, pumps, and repair kits. The body of the models is made of five-layer reinforced polyvinyl chloride. Inflatable chambers are connected using gluing or innovative welding technologies. High-speed modifications have reinforced seams protected with a special waterproof tape.
PVC boat storage
Looking ahead, it must be said that PVC boats are not so demanding to maintain.
To make it last longer, just follow these simple tips:
- When using the boat for the last time before storing it for the winter, clean it of dirt and dry it in an inflated state.
- Store it in a clean place. If you have carpet in your garage, lay it on the floor and roll it up.
- Within an hour of purchasing a boat, most fishermen cut out a small piece of linoleum to fit the inside of the bottom. This approach will protect the pad and make it easier to clean after use. All the dirt will remain on the linoleum and the grove will wash it away.
- After releasing the air, remove the seats, if any, stringers and floor mats. When folding the boat, press the ends of the cylinders against the transoms.
- Place the rolled up boat on a flat shelf. If it is stored in a garage, then make sure that nothing puts pressure on it.
- PVC material, unlike rubber, does not require talcum powder during storage. You just need to carefully roll it up and put it in a dark place.
In principle, boat maintenance is a procedure aimed at extending its service life. Particular attention should be paid to cleaning and washing it after use. Fish mucus remaining on the inside of the sides and bottom after fishing is very attractive to rodents with its smell. Therefore, after use, it must be washed with fresh water with the addition of chemicals.
