How to convert an ice auger into a screwdriver with your own hands

People have always sought to make their lives easier. This applies to both professional activities and everyday problems. Hobbies, including fishing, were not left behind. For winter fishing enthusiasts, especially in regions with a fairly harsh climate, when the ice on the reservoir is significantly thick, drilling holes is a serious problem. By using an adapter for an ice drill for a screwdriver, anglers have the opportunity to simplify this work.

Battery requirements for a screwdriver

The high-quality performance of the ice auger is almost entirely determined by the battery. It must have the highest capacity and withstand low temperatures.

Fundamentally! When preparing for fishing, it is recommended to have two batteries. Main and spare, in case the first one is discharged.

There are several types of batteries on the market.

• Lithium-ion. They are distinguished by the highest charging speed, low weight and high capacity. The main disadvantage is sensitivity to low temperatures and high cost.
• Nickel-cadmium. The main advantage is measured work in the cold. They are large in size and have small capacity.
• Metal hydride. Large batteries that withstand low temperatures well.

You should take metal hydride batteries. They more precisely meet the needs of the instrument.

Necessary characteristics of a screwdriver for winter fishing

Think about it and imagine what difficulties you will encounter when operating a screwdriver on a frozen pond? After some thought, the following three factors come to mind:

• Huge pressure
• Long battery life
• Cold

To work confidently in such conditions, it must meet certain requirements. Let us consider these requirements depending on each factor separately.

Heavy Duty Features

Agree that rotating a drill in ice requires quite a lot of effort from a screwdriver.
My tests have shown that a unit with a torque of at least 60 Nm can cope with such work. This same figure is confirmed by other fishermen who are already drilling holes with a screwdriver. Therefore, when purchasing, you need to build on this value. But at this point we need to make the following reservation: not all screwdrivers that have a specified torque of over 60 Nm will be suitable for us. Among them there are those in which high torque is achieved through an impact mechanism. It works well for tightening nuts and bolts, but is completely useless when drilling through ice. Therefore, models that achieve high torque due to impact are not suitable for winter fishing.

I note that there is another impact mechanism designed to simplify drilling brick and other stone materials - its presence will not have any negative impact on the use of a screwdriver with an ice auger.

Large loads also require that the screwdriver be of a professional class, since only in this case can it last for a long time. Professional tools are manufactured by the following manufacturers:

• AEG
• Bosch (blue)
• DeWalt
• Makita
• Metabo

The household class will not be suitable, so we are not considering all sorts of bison, calibers, anchors and other Chinese.

If you've drilled by hand before, you may remember how your drill sometimes jammed during this process. Now imagine what will happen if wedging occurs while drilling with a screwdriver - your hands can easily get twisted. To protect yourself from this, you need the screwdriver to have an additional handle, which is installed on the opposite side of the main one. This way you can confidently hold the device by grabbing it from both sides. Thanks to this, your hands will remain intact.

Tips for fisherman: Auger for ice drill for screwdriver 130 - Detailed review

Let's summarize this part like this: a large load requires a professional hammerless screwdriver with a torque of 60 Nm. And for convenience and safety, an additional handle is also needed in the kit. We’ve dealt with the heavy load factor, let’s move on to the need for long-term operation without recharging.

Features for long battery life

On a pond, no one will supply an outlet to you, so the operating time of the screwdriver will depend on the amount of stored charge. The charge reserve is equal to the battery capacity and is measured in ampere-hours. I think you understand that for drilling ice during winter fishing, it is better to purchase a screwdriver with a higher battery capacity, which is at least 3 Ah. And there needs to be at least two of them. Although, as I already wrote, we will need a professional-class device, and they are always equipped with at least two batteries.

By purchasing a screwdriver with a 3 Ah battery, you can drill at least 100 holes, and if you have a 5 Ah battery, then 150-170. Although this indicator, as mentioned above, also depends on the thickness of the ice.

Thus, when purchasing, we give preference to devices with the most capacious batteries possible. Now it's time to move on to such a factor as cold.

Cold Performance Features

This point is closely related to the previous one, since it is again about battery capacity, which becomes smaller at low temperatures. Therefore, this condition again requires the purchase of a screwdriver with a high-capacity battery.

Also at this point it should be said about the types of batteries. There are three of them:

• lithium-ion
• nickel-cadmium
• nickel metal hydride

There is an opinion that nickel-cadmium and nickel-metal hydride batteries perform better in the cold than lithium-ion batteries. However, my testing shows that modern lithium-ion batteries also perform well in the cold.

And the next point on this point is that nickel-cadmium batteries have a capacity of no more than 2 Ah, and nickel-metal hydride batteries have no more than 2.5 Ah. Lithium-ion ones can also have 5 Ah. Based on the fact that we need to have more than 3 Ah, we put nickel-cadmium and nickel-metal hydride types aside, especially since they are gradually being stopped being produced as obsolete.

So, having considered the three main factors that will influence the operation of a screwdriver in winter fishing conditions, we found out that we will need a professional non-impact screwdriver with a torque of at least 60 Nm, lithium-ion batteries from 3 Ah and an additional handle included.

Which models meet these requirements?

The LED light integrated into the housing allows operation in low light conditions. The impressive 1.5 Ah battery holds a charge for a long time. There are three modifications of this model: 12 V, 16 V and 20 V. The package may consist of one or two batteries.

Choice of materials for knives

The main part of the tool is the screw. Most fishermen use ready-made knives taken from hand-held ice drills. They meet the steel strength requirements. These knives are easy to adapt to a screwdriver.

Ice drill. DIY screwdriver

The best blades for motorized ice drills are Expert Pro, Nova System, Ice Micro, Tonar, Tornado, Barnaul.

To create an auger with your own hands, you will need a pipe and metal plates, steel knives. Hardened steel grade P18 or analogs with a hardness of 30 to 70 units are best suited.

Note! Making a screw with your own hands is a labor-intensive process that requires special knowledge. Fishermen recommend purchasing a ready-made auger.

Which is better: a screwdriver or a wrench?

A screwdriver fits the bill most closely for the conversion, but some anglers use a nutdriver. This is due to a number of advantages of the tool.

• The impact wrench has a more massive body.
• The impact wrench is a direct alternative to the screwdriver.
• There are no difficulties in making an adapter.

In the absence of screwdrivers, fishermen can also use a drill or chainsaw. But they require skills and are not always safe.

READ How to Cut Drywall at Home

High-capacity metal hydride batteries are better suited for creating an ice drill.

Advantages of a homemade ice drill

Most fishermen prefer homemade ice screws. They associate this with a number of undeniable advantages.

• Simplicity of design. Manufacturing does not require special knowledge and skills.
• Low cost. No expensive parts are required for implementation.
• High speed of drilling holes. By automating the process, the time required to drill holes is reduced.
• Reduced labor costs. With an ice drill, you don't need to put in a lot of effort when creating holes.
• Silence. The automated device operates quietly.
• Multifunctionality. In summer, the screwdriver can be used for its intended purpose.

Advantages of an ice drill with a screwdriver

Since winter fishing enthusiasts know what it means to manually drill a dozen holes, or even more, they prefer this design.

Ice drill from a screwdriver. Ice screws of screwdriver.

They point out the following advantages:

1. Easy to upgrade, which does not require special skills and professionalism.
2. There is no need for large financial expenses.
3. The genuine interest that this simple design evokes.

Fitting a screwdriver to an ice auger

Screwdriver -adapter-ice pick - sequence of tool creation

The adapters are equipped with a shaft on the drill side and a hexagonal head in which the cutting part is clamped. The average shaft length is 6.8 centimeters, the distance from the auger attachment point to the end is 2.6 centimeters. The correct connection diagram has the sequence screwdriver - adapter - ice ax.

Note! Preference should be given to adapters with handles and one stop. You should not take structurally complicated options.

Required materials and tools

Anyone who has minimal experience in working with metal can build such a drill for winter fishing. For this you will need:

• Regular hand-held ice auger ;
• Bulgarian;
• A cylindrical metal blank with a diameter equal to or slightly less than the thickness of the drill pipe;
• A metal disk with a diameter larger than the diameter of the screw;
• Screwdriver;
• Bolts and nuts with 8 mm thread.

cordless screwdriver must operate at a voltage of at least 18 V, and a torque of 40 to 80 Nm is required. Often during one fishing trip you have to change the location several times, which means the battery capacity should be about 3 A/h. For convenience, it is better to choose a screwdriver with an additional handle on the chuck.
If it is not there, you will have to add it yourself.

Selecting a screwdriver

In order to create stable operation of combined tools, you need to choose the right screwdriver, which must meet a number of requirements:

• Voltage, or rather power, which is determined by this indicator. In this case, the higher the indicators, the more powerful the device; for use in winter fishing, an 18 V device is suitable, but this indicator is minimal. To achieve maximum performance, it is better to choose 36 V screwdrivers. This way, the drill will be able to cope with heavy loads, or more precisely with greater ice thickness.
• Rotation, the more revolutions, the better, the easier and faster the drilling process. The minimum criteria for choosing this indicator are 40-70 Nm, but the most preferable are models with 80-90 Nm.
• The capacity of the battery determines how long the device will operate without additional recharging. Indicators usually range from 1.5 to 4 Ah. Some people purchase several batteries at once so that they can be replaced if necessary.
• Strength, in this case, attention is paid to the body, since quite often the tool slips out of the hands, this is due to the conditions in which it is used. If dropped, the case may crack, which will lead to its failure as a whole. In order to avoid this, it is recommended to choose proven brand models. You can always search for reviews on the Internet.
• The handle, the part that allows you to hold the ice auger with both hands and avoid unnecessary injuries. For convenience, it is best to have it on the side.

The period of operation is affected not only by the quality of the device, but also by its timely maintenance; the weakest point is considered to be the gearbox, a unit consisting of a set of gears located inside the housing.

How to make a screwdriver for an ice drill from a regular screwdriver?

For avid fishermen, even the harshest winter cannot become an obstacle to their favorite hobby. It is impossible to imagine real winter fishing without an ice drill. But a screwdriver is usually not included in the equipment. But thanks to this power tool, you can significantly speed up the process of making a hole.

Ice screwdriver: how not to waste money?

Good afternoon, dear readers. Today we will talk about cordless screwdrivers that can be used as an ice drill (motor drill). Recently, the demand for this screwdriver has been growing.

Let's start with the fact that cordless screwdrivers for ice drilling must have a power of at least 60 Nm, and the battery capacity must start from 3 Amps. You need to understand that buying a model with such characteristics for “cheap” will not produce such a tool, it will be from a professional series, which means The price tag will start from 10,000 rubles.

How to make it yourself

Making such a gadget for fishing with your own hands is not difficult, although you will need the skills of a turner. First of all, you need to cut off the handle from the ice auger - what should remain is an auger with a straight shank. At a distance of 2 cm from the cut, you need to make a through hole across the pipe. An 8mm bolt should fit freely into it.

To fix the drill in the screwdriver chuck, you need to make a special adapter for their metal cylinder. The diameter of the blank should be adjusted so that it can easily fit into the hole in the ice drill pipe. Then, on one side, the same transverse hole is made for the bolt.

It is important to maintain the alignment of the holes. At the other end of the blank you need to make a hexagonal shank for the screwdriver chuck. It is better to entrust this to an experienced turner, but you can try turning the hexagon yourself on a grinding wheel. It is unlikely that you will be able to make the shank neat, but still the lotion will have a positive effect on the speed of drilling through ice.

Before inserting the adapter, it is advisable to supplement the ice screw with protection against drowning. To do this, you will need to secure a metal disk above the auger. This will prevent the fishing tool from sinking into the hole.

Now you can fix the adapter in the hole, but before testing it is better to make the angle of the cutting edges sharper. To do this, you just need to place a few washers under their mount. Thanks to this approach, it will be easier for the power tool to bite into the thickness of the ice.

There is absolutely no need to throw away the handle. You can fix it at the end of the pipe. With this approach, even if the screwdriver’s battery is discharged, the fisherman will still be able to make an ice hole in the traditional way.

READ Wood drilling drilling tools

Making an adapter for an ice drill for a screwdriver with a handle with your own hands

An adapter is required to connect the screwdriver to the drill. You can save on purchases by building the adapter yourself.

Read also: Cascade spot welding transformer

The shape of the adapter is presented in the form of a hexagon. The screwdriver is connected by clamping it in the chuck. To ensure a strong connection, the clamp is held with a special key. The second side of the hexagon is connected to the ice ax. The auger with adapter is secured with a bolt through a pre-drilled hole.

For ease of use of the tool, fishermen recommend attaching a handle to the device. Its presence will make drilling holes comfortable and will prevent the tool from falling into the water. When using a self-made ice auger, you should understand that larger holes will require more powerful equipment. The recommended hole size is 10-13cm.

How to create an ice screw from a trimmer with your own hands

Another device that can be adapted for an automatic drill is a trimmer. It is a fairly easy-to-use device. Its package includes an elongated handle, a motor, and a specialized head for the line, which receives torque.

When creating an ice screw from a trimmer with your own hands, you need to prepare the following elements:

• trimmer motor;
• auger part of the ice drill;
• a set of tools necessary for remodeling.

The main problem that will need to be solved. how to fix the shank of an ice drill on a fishing line head. As soon as a solution can be found to connect the two mechanisms, the angler will receive an excellent device for drilling holes. By the way, another option is to turn a hole drill from an ice drill with your own hands. Structurally, there are no fundamental differences between these devices.

Making an adapter for an ice auger and a screwdriver

Features, design and purpose of the adapter

The main purpose of the tool in question is to transmit torque from a screwdriver to an ice drill. Many adapter manufacturers carefully equip the device with a special handle, which provides a more secure grip during drilling.

In terms of their design, adapters can be created in a variety of ways. The simplest option is made in the form of an ordinary metal sleeve, on one side of which there is a hexagonal shank for fastening to the chuck of a power tool, on the other - a connector for fixing to the ice drill auger. Often this design is complemented by a safety plate or washer , which prevents the auger part of the drill from falling under the ice when the tail pops out of the chuck.

The adapter for the ASh-400 type ice drill is slightly more complex in design, which is essentially a similar simple adapter, but designed to work with the Barnaul Tonar drill. It identically has a hexagon on one side for fixing to the screwdriver chuck, and on the other it is attached to the auger part of the tool.

The main difference is the presence of a special handle that prevents the auger from being lost if the hexagon accidentally pops out of the screwdriver chuck. In addition, it provides a reliable grip on the entire structure during the drilling process. The cost of such an adapter is about 900-1000 rubles.

The adapter is installed in the following order:

1. The bolt that secures both parts of the drill together is unscrewed.
2. An adapter is installed in place of the top of the drill, equipped with handles, to the auger.
3. The six-point shank attaches to the power tool chuck.

This way the ice auger and screwdriver will be ready. After work, if you want to use a hand drill, disassemble the adapter in the reverse order.

I would like to note that adapters of the ASh-800 model are additionally produced for Tonar ice drills. The main difference from the ASh-400 is that they allow you to adjust the drilling depth , which can be very useful in places where ice can grow much thicker than the auger part of the ice drill. The cost of the older version of the adapter is practically no different from the 400th model.

Also for ice drills of the Iceberq line, adapters ASh-05 are manufactured, which differ in the diameter of the output shaft, which is 22 millimeters.

Read also: Network cable crimping device

We install a screwdriver on an ice auger with our own hands at home

With the advent of powerful models of screwdrivers on the domestic market, fishermen quickly found their bearings and adapted this device for an ice screw. As a result of this original solution, an excellent automated drill was born, with which it became possible to drill through ice without effort.

Manufacturers also began to keep up with the times, producing adapters for connecting these two different mechanisms. The Swedish Mora, along with ice screws that have an attachment for docking, also produces adapters directly. Domestic drills are not designed for this, so craftsmen have to approach this issue radically.

Manual automation has a number of advantages:

• upgrading an ice drill will not be difficult;
• rework will cost much less than buying a motor drill;
• To make structural changes you need a minimum of conventional tools.

By the way, Russian ice screws are much more difficult to adapt, since they rotate in one direction with the spinning of the screwdriver cartridge, which is why it will have to be tightened all the time. In this case, there is only one way out - installing a reduction gearbox, however, not everyone is able to make one.

Selecting a screwdriver

When choosing any tool, you first of all focus on the amount of work that this tool will perform. This will allow you to more accurately navigate the choice of the required device. First of all, the choice is made according to two parameters - how much power the screwdriver has and its torque, which we wrote about in the article “Selecting a screwdriver for an ice drill.”

The minimum power of the device should be at least 18 V, however, when drilling deep holes, you will need a more powerful device, for example 36 V. However, its cost will increase significantly. The second necessary indicator is torque, the value of which should be in the range of 50-70 Nm. This number determines how fast the auger will spin.

Ice screwdriver: rating of the best models

Our selection includes screwdrivers that have suitable torque and very reliable and durable mechanics. If you already have a cheap, relatively powerful screwdriver at home for home purposes, then it doesn’t make sense to take another one separately for fishing; it’s best to try an adapter with a gearbox. Maybe it will be the best screwdriver for an ice auger. The rating of the models presented below will allow you to choose which cordless screwdriver for ice augers is better and has an acceptable cost.

Makita DDF481RTE

This screwdriver is aimed at professional use, which is why the price of the unit is so high, about 20,6000 rubles. A power of 100 fifteen Nm gives reason to believe that it will be enough for many, many deep holes. The main thing is to protect your hand from dislocation when biting a drill in ice. The kit comes with two batteries, each with a capacity of 5 Ah and a voltage of eighteen V.

Pulse

The mechanism of operation of pulse systems is that the voltage is first rectified and later converted into a special pulse signal. With all this, it is important to achieve a measured voltage. The transformer winding or resistors can help with this.

Switching power supplies are quite efficient and can be used in various conditions. At the same time, they have the highest level of protection against short circuits and similar effects. But in terms of power, pulsed systems are obviously inferior to transformer systems. In addition, such blocks are very capricious in terms of input voltage. If it is lower than set, then the element may simply not work.

Is it possible to make an ice screw from a calm wind?

A gasoline motor drill is quite a complex and powerful unit. It is a screw part connected to the motor drive. As a rule, such devices are equipped with two-stroke engines, but modifications are possible that differ in speed.

Single- or two-speed drills quickly drill holes not only in ice, but also in the ground. However, along with professional motor drills, fishermen create their own models that cope with their tasks perfectly. First you need to calculate the compatibility of the engine and the gear system.

A gearbox is needed to reduce the rotation speed. After preparing the calculations, you can assemble the structure that we wrote about in the article “How to make an ice drill from improvised means.” First, a frame of two pipes is welded in which the gearbox will be placed. The gasoline engine is mounted either tightly or in a removable version, which is more preferable.

READ Drilling stainless steel at home

Required adapter adapter

For a homemade adapter, a thick-walled tube or even a metal rod will fit, the diameter of which will fit into the shank of the auger part. The second end, for the screwdriver chuck, is made from a regular bit. Both parts are welded together while maintaining alignment. To secure it, a through hole is drilled in the auger shank through which a fastening bolt passes.

What types of gearboxes are there?

There are both V-belt and worm gearboxes, which, despite having significant differences in design, are designed to perform the same role. For an ice drill, a worm gear is best. True, their efficiency is somewhat lower, and they heat up much faster, but they can be placed directly on the shaft of the original mechanism.

In this way, you can assemble an ice screw from a calm wind with your own hands. During operation, it is important to follow safety rules. You should not put too much pressure on the device during the drilling process; it can sometimes be difficult to handle, especially if the knives hit an obstacle.

Craftsmen even manage to install a drive on an annular ice drill with their own hands, the diagram of which is posted on the Internet. Proponents of such mechanisms believe that less effort is required when drilling. They are silent - and this is an important advantage when catching shy fish. In addition, the structure of the ice is clearly visible on the resulting ice cylinders.

Rules for caring for a fishing drill

In order for the ice auger to work as long as possible, it must be properly cared for. Basic Rules:

1. Wipe the instrument dry after each use. The procedure is necessary for products with and without anti-corrosion coating.
2. For storage, use a special case made of thick fabric and with ventilation slots.
3. In summer, the drill should be lubricated with a thin layer of machine oil, paying special attention to the legs.
4. Do not knock ice and snow off the knives to avoid dulling them.
5. Regularly lubricate parts of the folding structure that experience maximum loads with oil to prevent jamming.
6. Immediately replace loose nuts after detecting a defect.
7. Paint over scratches to prevent corrosion of the protective layer.

When drilling holes, distribute the loads evenly, always take into account the parameters of ice thickness and the rotation speed of the tool’s working head. The quality and speed of drilling will largely depend on the model of the auger and the technical parameters of the screwdriver itself.

Ice auger, hole auger, gearbox for an ice auger - we do it all ourselves

A do-it-yourself gearbox for an ice drill is a necessary thing in a fisherman’s arsenal if he is planning to automate a conventional auger mechanism that is at hand. By the way, when the first ice drills were born, they had a variety of drilling devices. However, as a result of natural selection, only augers withstood the competition.

Such mechanisms cope well with two tasks - they make holes in the ice well and bring ice chips out. The cutting element consists of a pair of blades, the edges of which point in opposite directions. They are installed at a certain angle.

Battery specifications

In winter, most of the fishing takes place at sub-zero temperatures, and this fundamentally determines the life of the electrical device. They are divided into three types:

• Ni-Cd. nickel-cadmium ones have proven themselves well at low temperatures, however, they are distinguished by their increased mass;
• Li-Ion. Lithium-ion ones have a low weight and charging time, but in cold weather they become of little use;
• Ni-Mh. You can rarely find nickel-metal hydride ones; their characteristics are similar to the first ones.

The most widely used are lithium-ion ones due to their good resistance to sub-zero temperatures. Works great in the range from 40 degrees to .50. The advantages include such a property as storage in a discharged state. When making an ice screw with your own hands at home, you should pay close attention to it.

Unfortunately, they have a memory effect, that is, if you use them correctly and recharge them, everything will be great, but up to a certain point. Even if the battery is not used, it will still lose its energy capacity by 20-25 percent within a couple of years.

Nickelium-metal hydride batteries have a lower mass, increased capacity, and a small memory effect, but even with a slight minus temperature in the pond, the life of such batteries quickly runs out. By the way, it is recommended to pay attention to the battery capacity, which should be in the range of 2.5-3.0 A/h.

Sources:

https://tehnopanorama.ru/diy/kak-sdelat-shurupovert-dlya-ledobura-iz-obychnogo-shurupoverta.html https://www.udim.ru/articles/ledobur_yamobur_reduktor_dlya_ledobura_delaem_vse_svoimi_rukami/

Popular models

Although independently manufacturing a device for breaking the ice layer before starting winter fishing is not a task of increased complexity, if you do not have free time or desire to do such work, as well as if you have the appropriate financial capabilities, you can find a large number of ready-made ice screws in a specialized store.

But even when creating a homemade device, a winter fishing enthusiast still faces the question of purchasing a cordless drill suitable for these purposes. Taking into account the criteria described above, it is much easier to navigate the widest range of commercially available models and choose the best option for yourself. Below are some of the most successful solutions.

Video: Drilling ice with a screwdriver

Makita DDF441RFE

Kabushiki—

Gaisha Makita is a well-known Japanese corporation that has been steadily operating in the market of professional electric and gasoline tools for more than 100 years.

In the line of products produced under the Makita brand, you can choose several screwdrivers suitable for winter fishing. One of these models is coded DDF441RFE and meets the following characteristics:

• torque: 70 Newton meters, 16 stages;
• battery capacity: 3.0 ampere-hours;
• battery voltage: 14.4 V;
• presence of three speeds;
• device weight: 2 kg;
• dimensions (height, length, width): 370×480×135 mm.

The main disadvantage of the product is its high cost.
On the Russian market, the instrument costs approximately 18 thousand rubles, but it is not so easy to find in stock, therefore, most likely, you will need to order and wait a long time for it to arrive. The kit includes a charger and spare battery, as well as a side handle and a convenient carrying case. The manufacturer guarantees a year of uninterrupted operation of the tool and another 4 years of free maintenance (repair) at the company’s service centers.

Find out also about the features and types of jigs for winter fishing.

Metabo BS 18 LTX Impuls

The Germans are worthy competition for the Japanese. Metabowerke GmbH is a time-tested manufacturer of professional power tools, present on the market since 1924.

The approximate price on the Russian market is 26 thousand rubles. A spare battery is included.

The cordless screwdriver model BS 18 LTX Impuls is characterized by the following parameters:

• torque: adjustable from 1.5 to 24 newton meters; in hard mode - up to 110 Nm, in soft mode - 55 Nm, in pulse mode - 60 Nm;
• number of speeds: 2;
• shaft rotation speed: up to 500 and up to 1700 rpm, respectively at 1 and 2 speeds;
• battery capacity: 4.0 Ah;
• battery voltage: 19 V;
• weight: 2.3 kg.

We recommend that you read the information about floats for winter fishing.

Makita 6337DWD

Another drill/driver model from a well-known Japanese brand, but, compared to the DDF441RFE described above, it is less powerful and, accordingly, cheaper. Compactness can also be noted as an advantage.

A spare battery is included. The approximate price on the market is no more than 10 thousand rubles.

Main characteristics:

• torque: 65 newton meters;
• shaft rotation speed: 1300 rpm;
• battery capacity: 2.6 ampere-hours;
• battery voltage: 14.4 V;
• presence of two speeds;
• device weight: 2.1 kg;
• dimensions: 241×95×65 mm.

Pay attention to how to make a fishing rod with your own hands.

Bosch GSR 18 VE-EC 0 L-BOXX

The Bosch brand does not need additional advertising. In the line of the Bavarian manufacturer, it is worth highlighting the powerful cordless screwdriver GSR 18 VE-EC 0 L-BOXX with the following parameters:

• torque: 75 newton meters;
• battery capacity: 2 Ah (two included);
• battery voltage: 18 V.

The price is consistent with the brand and starts from 27 thousand rubles. The device is equipped with a modern motor and overload protection (which, in relation to the task at hand, may turn out to be more of a minus than a plus). In addition, the price is influenced by the ultra-modern CoolPack battery, which, according to the manufacturer, has doubled service life.

Read here about homemade products for winter and summer fishing.

AEG BSB18CBL

AEG is a German manufacturer of electronics and home appliances with headquarters located in Berlin.

The AEG BSB18CBL cordless impact drill/driver is an excellent modern device that meets the following technical characteristics:

• torque: 60 Newton-hours;
• shaft rotation speed: 2100 rpm;
• Lithium-ion battery capacity: 2.0 Ah;
• battery voltage: 18 V;
• number of steps: 12;
• weight: 1.8 kg.

A spare battery is included. The price, taking into account the good quality, is relatively low - about 20 thousand rubles. To drill holes in the ice, winter fishing enthusiasts use various devices, but one of the most convenient, perhaps, is an ice drill made from a cordless screwdriver. This design is far from cheap, since only professional and powerful tools can cope with work under conditions of increased load, low temperatures and the absence of the ability to recharge the battery. However, any real hobby requires costs, especially if they are paid off by the pleasure of doing what you love and a good catch.