5 best bite alarms – rating 2021

Place

Name

Characteristics in the rating

TOP 5 best bite alarms

1	Mikado AMS01-HX-1	The best choice
2	TONQUU	Convenient attachment to the rod
3	Megatex Soyka-4	The best alarm with a plumb line
4	Mikado AMS01-HS-D	Possibility of precise sensitivity adjustment
5	Hoxwell-HL54	Alarm with remote transmitter

Sound alarms

Devices with a sound effect are considered more convenient to use in contrast to visual alarms. Information about the bite that has occurred is transmitted using sound and melody. This type of device is mounted on the top of the feeder. Bells, metal tubes equipped with metal parts, ball bearings, and bells act as sound alerts.

The principle of operation of such a device: during a bite, the alarm begins to make oscillatory movements from side to side, as a result of which the rattle is triggered, making a corresponding sound.

Installing a bite alarm

Options for homemade sound devices

The most common self-made devices include:

Bell

Here you need to understand that we are not talking about making the correct bell as such, but about the method of installing it on the feeder tackle. You can purchase a ready-made bell at any specialized retail outlet.

The classic option for attaching the device is to use any clamp. As practice shows, this method is not reliable.

It's better to use the following option:

Take a small piece of rubber band.
Attach it to the feeder stand at a distance of 20 cm from the top.
equipped with a small wire hook to the already fixed harness
Having thrown the tackle and installed it on the stand, you need to take the bell hook and fasten it to the working thread near the reel. But at the same time, the elastic band should pull the thread back a few centimeters.

At the moment of the bite, the thread is stretched and the bell begins to ring. The advantage of such a device: during the next cast, the alarm does not need to be removed each time; it does not interfere with catching prey at all.

Bells

The design of the bells consists of two hollow balls with a bearing inside, which is necessary to create a sound effect.

To make it you will need:

spiral wires with a length of 10 cm;
clamping elements (for example, clothespins) as fasteners to feeder tackle.

So, a spiral wire equipped with bells (on both sides) must be fixed on one of the parts of the clamping element. If the pinch is installed on a tackle stand in a vertical position, then the sound element should be in a horizontal position. In this position, the bells will be in a certain position of weightlessness, which will increase the sensitivity of the device.

Typically, bells are attached to a tackle stand. Mounting them on a fishing tool without support is neither advisable nor practical. The option of attaching this device to the top of the tool is also not suitable; the tackle will be overloaded.

An important point: when installing bells on a stand, it is recommended to leave a small gap, which will help ensure free movement of the alarm. This way, the clarity of transmission of vibrations will be guaranteed.

Bite alarms for feeder

An alarm is a device that uses a visual or audible signal to indicate that a fish is trying the bait.
The general principles of operation of alarms are consistent with the peculiarities of their location. Alarms can only be located on the crossbar of the tackle, while the fishing line is in tension.

In this case, when the fishing line trembles, the vibrations will be reflected by the alarm. There is another principle of operation, in which the signaling device will be mounted both on the feeder crossbar and on the fishing line. Any vibrations that occur both with the tackle and on the fishing line will be recorded by the alarm. As a result, the sensitivity of the alarm increases. It should be noted that in all cases, the function of the alarms is to clearly transmit vibrations during a bite.

When fishing with a feeder, you can use visual types of signaling devices such as floats, nods, fireflies, which most obviously and clearly show that the fish took the bait and was hooked. Also, sound types of alarms are used such as rattles, bells, bells, through which you can determine the presence of a bite by the sound indications emitted.

In addition, there are electronic alarms that will notify you of the presence of a bite through both a visual and audible signal. We will now consider the operating features of each type of alarm.

TOP 7 best bite alarms rating 2021

TOP 7 best bite alarms rating 2021 in 2021 buy. TOP - 10 overview of the best reviews. TOP 7 best bite alarms rating 2021 in Russia list 2021 - 2021.

Bite alarms make it easier to fish with multiple rods placed along the bank or on a dam. Such devices also allow you to move away from the gear to the tent, communicate with friends and eat food, without worrying about missing a bite. Our experts looked into which models do fishermen in Russia prefer and why. Thanks to this review, it will be easier for you to choose your own alarm system based on the characteristics and reviews of the product.

The best mechanical bite alarms

Mechanical alarms are distinguished by their affordable prices. There are many subspecies of them (hangers, swingers, springers, bats, “monkeys”, etc.). The general principle of operation is to transmit vibrations from the fishing line so that they are more noticeable. But in strong winds or at a great distance from the fisherman, they are not so effective, but they do not require power sources and last a long time. Here are the best options experts found in this category.

Crane Megatex

This alarm has a coupling for attaching to the end of a fishing rod and two arms. The principle of operation is based on the balance of the parties. A fishing line with a weight and bait is attached to the red flag. The opposite side has a free spoke edge to fit the counterweight and achieve balance. When the fish pulls the bait down, the flag nods. When the bait is pushed upward, the alarm rises. The system with counterweights allows you to customize the operation of the bite detection device to suit the variety of any bait. The gear is suitable for short winter fishing rods, which the fisherman holds in his hand or places on a stand.

Experts note that this is one of the most sensitive mechanical bite alarms, significantly superior to traditional rod tip nods or a float system. It will help you not to miss even the most careful bite.

Advantages:

works at any depth;
the ability to adjust for baits with different weights;
good visibility;
reacts even to the slightest bite.

Flaws:

The mount is only suitable for short fishing rods for winter fishing.

Prologic K3 Hang Indicator Set 3 Rod

The set of mechanical pendant bite alarms includes three models with blue, red and green bulbs. The rest of the plastic can be black or white at the buyer's choice. The design has narrow barrels with clamps that carefully grasp the fishing line. The second retainer with a ring is put on the holder. The alarm is designed for feeder rods and perfectly demonstrates the bite of carp or crucian carp, which is confirmed by fishermen in reviews. To set up the tackle, the cylinder unwinds and weights with a maximum weight of up to 8 g can be placed inside. The principle of operation is to twitch the alarm when the fish tries to pick the bait.

Experts liked the fishing equipment for its long service life. This is facilitated by a high-modulus graphite body, acrylic coating and a high-density plastic clip.

Advantages:

durable body;
easy weight adjustment;
clip for hanging;
There is a white and black series.

Flaws:

high price.

The best electronic bite alarms

Electronic direct alarms react to vibrations of the fishing line and respond with sound and light signals, attracting the attention of the fisherman. Thanks to this functionality, they are easier to notice, even when you are far from the fishing rod. Models with indirect action are equipped with a pager, so the bite signal comes to a device located in the user’s pocket. This is even more convenient and allows you to be away from the rods at the distance specified in the operating instructions.

Prologic K3 Bite Alarm Set 4+1

The set contains four alarms and a pager that receives a bite signal. To alert the fisherman, there are 5 volume levels and a silent mode, in which the LEDs only blink and vibration is triggered. This is convenient if the rest of the team is asleep. The user can adjust the sensitivity of the alarm in four levels. If the line is simply slack, a separate signal with a different tone will sound, so as not to confuse it with a bite. You can also set one of seven sound signals to choose from, so you can choose one that will be clearly audible, but will not frighten you.

The bite indicator set benefits from being completely waterproof. For the sake of 100% waterproofness, the manufacturer even had to abandon the socket for connecting the swinger. The housings of the alarms are not only protected from rain, but also sealed, so an accidental fall into the water, which is not uncommon when fishing, will not harm them.

Advantages:

sufficient supply of threads for fixing to the rack;
six LEDs on the pager for visual notification;
convenient case for transportation;
There is a silent mode and vibration on the receiver.

Flaws:

high price;
swinger cannot be connected;
Only for thin feeder rods.

4+1 JZH-RF-1118

But here is a decent set that costs three times less than the category leader, but has excellent characteristics. The set includes 4 alarms and a pager. If desired, the model supports the connection of two more indicators, with which a 6+1 system is obtained. Everything comes in a durable, foam-lined case for gentle transportation. The user has access to 8 bite volume levels, 8 tones to choose from, and 6 LEDs. When the battery is low, the device triggers an alert. Fishermen in the reviews like that the tone can be set not only in relation to the strength of the bite, but also depending on the direction of unwinding of the cord. All settings are saved in memory and on your next fishing trip you won’t have to fiddle around for a long time before starting.

Alarms are interesting not only for their bite detection functions, but also for their additional capabilities. For example, here you can set the “Anti-theft” mode, in which the device will “scream” if someone tries to remove the rod from the stand in your absence. At the same time, a signal about unauthorized actions will be sent to the pager. This feature is useful in crowded waters if your camp is set up far from the shore.

Advantages:

convenient case with foam lining;
rubberized buttons for settings;
individual light indication;
Possibility to connect two more alarms.

Flaws:

cannot be dropped into water;
high price.

SWD JHA-521 (4+1)

Among the proven 4+1 alarm kits, a popular option is the SWD JHA-521. The bite detection device can be adjusted to 5 sensitivity levels and the direction of unwinding of the fishing line. There are also 5 tones and a silent mode available. The waterproof housing allows you to use the gear in the rain. The pager has an LED indication and five volume levels. The receiver's response range from the emitters is 150 m. If you want to connect a swinger, the manufacturer has provided a 2.5 mm connector. According to reviews, the product has proven itself best when fishing for carp.

We singled out the alarms for their reliable operation of automatic night lighting. When there is a bite, the indicator will illuminate the rod, and this will allow you to grab it securely for hooking.

Advantages:

you can fish in the rain;
5 sensitivity levels;
there is a silent mode;
range from the receiver is 150 m.

Flaws:

will spoil if dropped into water;
You cannot connect more than 4 alarms to the pager.

German Barracuda TS 4+1

The set for use on 4 rods is equipped with alarms with a universal thread for stands. The semicircular cutout makes the model convenient for positioning feeders and other gear. Each indicator has four buttons for adjusting volume, tone, sensitivity and backlight. The rubber ring on the thread ensures a strong fixation to the stand - the support will not rotate spontaneously. Reviews show that threading the fishing line into a special slot is not difficult. The set comes with a pager with a range of up to 100 m. It has its own speaker, so when there is a bite, the sound signal will come from both the alarm and the receiver.

The “4+1” set is interesting because the radio has a screen with numbers instead of colored diodes. When the alarm is triggered, its number lights up. This allows you to react faster to understand which rod to grab. Competitive models use color coding and you need to remember which is which. Here, the system with numbers saves decisive fractions of a second so as not to miss the prey.

Advantages:

can be used stationary or with a walkie-talkie;
communication range with pager up to 100 m;
durable soft plastic;
Fishing is allowed in the rain.

Flaws:

The buttons on the alarms are set deep and are inconvenient to press for people with large fingers.

Flajzar Neon TX3 Set 4+1

This is a premium set of electronic alarms that allows you to adjust the line sensitivity to fluctuations from 4 mm to 10 cm. While you are installing the rod again after casting, the trigger function can be temporarily disabled by pressing the Mute button. Anglers in the reviews like that this series is protected from moisture penetration inside, so the bite indicator will not deteriorate if it is accidentally dropped into a pond.

The feature of such alarms is a translucent body, inside of which there are several rows of LEDs. When biting, they don’t just blink, but indicate the direction in which the fish is pulling the line. This allows you to determine how to hook the prey even when approaching the rod. The second feature of the alarm is automatic brightness adjustment, depending on the ambient light. On a sunny day, the diodes will flash at maximum so that you notice the glow. In the dead of night, the light bulbs produce subdued light, so as not to create a “disco” on the shore.

Advantages:

“smart” light indication indicating direction;
sound alarm with the ability to determine the side of the line unwinding;
waterproof case;
automatic brightness control.

Flaws:

Making your own visual bite alarms

A visual alarm helps the fisherman visually notice a fish bite. Eye alarms come in the form of a nod, float, firefly or foil tube.

Nod

The nod is a spring with a length of 10 to 15 cm. On one side, the spring is attached to the tip of the feeder, and on the other side there is a ring into which the fishing line is threaded. To assemble a feeder nod with your own hands, you will need a rigid steel wire or a ready-made spring element. The nod can be made movable. To do this, attach a rubber or plastic tube to the tip of the feeder. When changing the length of the tube, the rigidity of the nodding mechanism is adjusted.

Float

The float can be made from a thick piece of foam or purchased ready-made in the store. When creating, it is important to maintain the proportions of the weight of the feeder and the alarm, otherwise the float will either sink immediately or float on its side. During the process of assembling the tackle, a locking ring is attached to the fishing line, which helps to select and adjust the immersion depth of the feeder. It is best to make the ring tight so that the length of the fishing line is adjusted only when necessary.

We also recommend reading:

Budget spinning reels Riobi Exiya Features of crucian carp killer gear and how to make such equipment How to properly tie a jig to a fishing line Diagram of how to learn how to tie a hook to a fishing line