✅ How to make a sled with your own hands

Homemade sleigh for children and adults

You can make a sled at home using various materials. It is better to discuss the design of a children's sled with the child for whom it is intended, if the child is not very small. After all, he should like such a thing. The sled can have elements needed for certain activities, a high back, a wide armrest, wide runners, or in the Finnish style, where the seat is in front with a high back, the handle is behind the seat at the back, on runners from the rear of the foot platform. It is imperative to discuss what material to make from.

Materials for making sleds

The main material for making sleds is wood. It is advisable to have boards made of coniferous wood. This material is most resistant to temperature fluctuations. You can also use multi-layer plywood, although a product made from such material can quickly become unusable. A sled with runners, 2-3 centimeters wide, can be made from a board of the required length and width, cutting out the sides with runners in two parts, similar to the sides of chairs, which are then connected by transverse strips that form the seat, at a height of about 20 centimeters, as well as the back and in front of the footrests, on the runners themselves. Markings must be applied to the board corresponding to the length and height of the sled, indicating the runners, armrests and back elements. Having cut out the sidewalls, we connect them with transverse strips, secured in the grooves of the sidewalls, using glue and fastening them with self-tapping screws for guarantee. To strengthen the sled, we cover the runners with metal strips, the seat can be “insulated” with any insulation, or a cushion can be made from foam rubber.
Modern technologies do not stand still. Craftsmen considered such an interesting material for creating various designs as polyvinyl chloride pipes, used in everyday life for water supply. If you have corners and plugs, tees and adapters, you can assemble anything from them. The main thing is to make preliminary sketches so that it is clear where and what to fasten, which parts to solder. Such designs are more suitable for small children. For insulation, you can use foam rubber, a piece of faux fur or natural rabbit skin.
The third, more adult option is the option of making sleds for adults and teenagers from steel pipes. Using bent pipes instead of runners, jumpers must be attached to them by welding, forming the main frame of the sled. On top of it you can put wooden planks for the seat, strengthening them with self-tapping screws. You can use the Finnish sled option. It is essentially a chair mounted on skids, with attachments at the back of the chair for a second rider. A powerful frame made of steel pipes will allow this design to be used for adults.

To make such a sled at home you need the following tools:

electric jigsaw,
soldering iron,
screwdriver,
roulette,
self-tapping screws of different lengths,
wood glue,
wood varnish or paint,
welding machine,
materials for insulation.

The skillful hands of homemade “homemade” people amaze with their imagination. The design and shape, as well as the materials from which the sleds are made, their design depend on the skill of the master.

DIY sleigh: ideas, photos and drawings

Winter always comes unexpectedly, even if you are really looking forward to it: one morning, waking up and looking out the window, we will see the long-awaited snow, which so attracts the kids to frolic! And adults are usually not averse to cheerfully throwing a couple of snowballs, enjoying the clean frosty air and squinting at the sparkling white, still untouched snow cover.

It would not be a mistake to say that the main attribute of winter games for children (and often adults) is a sled.

Parents who have to take their children to kindergarten cannot do without a sled; An important help in the household is a sleigh, adapted solutions for various tasks. As a rule, any sled can be bought in a retail or online store: the choice of models is huge, the price range is very wide, the range of materials used and colors is also, as they say, for every taste. But what if you are a creative person, and your skilled hands miss the tools? Of course, get down to business! And the money saved, the feeling of satisfaction with the result and the child’s pride in his father, who “can do anything!” will be a well-deserved reward.

So, before you get down to business, you should choose the type of sled, think about its design and structure, and also decide on the materials. Let's be honest, you can assemble a classic-type sled on your own (“on your knees”)

or Finnish sleds, which are distinguished by the presence in the front of a seat with a backrest and elongated runners with small anti-slip platforms for the feet.

As an option, you can consider a snow scooter with a front turning ski and steering wheel, but this is somewhat beyond the scope of this article and, in the strict sense, is not a sled.

The design and construction of children's sleds can be very diverse - from simple ones, aimed at solving strictly utilitarian problems, to carved ones, using openwork elements and parts made of bent wood, usually in a pseudo-traditional style. It will not be a secret that every home craftsman chooses a design according to his capabilities and technical skills, often based on the materials available.

Here are some ideas on how to make your own sled:

DIY sled

As soon as the first snow fell, it turned out that the house did not have such a necessary winter cargo vehicle as a sled. Children's sleds have long since been "sent" to a well-deserved rest in a pile of scrap metal, and they would have been rather weak for carrying heavy loads.

I had to take up the production of new sleds, so to speak, household ones - stronger and more suitable for transporting goods (Fig. 1).

In the far corner of the yard, under a shed in a scrap metal warehouse, I found arms from the headboards of steel beds and some thinner pipes that had been prudently stored just in case.

As the production of these sleds progressed, a whole set of structures for similar purposes swarmed in my head, and not universal ones, but specialized ones. But more about them later.

When designing the sled, I provided for such solutions.

Firstly, given the rather small size of the sleds themselves, they can be used to transport not only massive, but also oversized loads. To do this, their platform must be made in the same plane with the front jumper - the traverse. However, as the work progressed, I decided to install the traverse a little higher than the platform so that it would serve as a front support for the cargo box. And if necessary, lowering the jumper to the level of the platform will not be difficult.

Secondly, the platform must be quite high in order to transport overhanging loads on the sled. Thirdly, it is not advisable to make the platform solid, but it is better to make it lattice to make it easier and more reliable to attach loads to it, passing the rope not only along the edges, but also in the middle. To transport bulk cargo (snow, sand), you will still have to use a box or box.

And one last thing. It is advisable to also bend the rear ends of the runners a little - then, if necessary, you can easily take the sled back.

Here, perhaps, are all the “little tricks” that I tried to provide when making cargo sleds. The process of making them, as they say, is a matter of technology. First, I prepared individual parts: runners from a pipe with a diameter of 30 mm - from metal beds, rack-portals - from a 20 mm pipe. It is important that the racks are as identical as possible to each other, and that the runners are mirror images. I bent the tubes of the portal stands in a vice, and therefore in the places where they were bent they were slightly flattened and weakened. For reliability, these places had to be reinforced with struts, also made of pipe, but with a smaller diameter - 14 mm. Although, as an option shown in the drawing, this can also be done with scarves.

DIY foam sled

It’s a pity to throw away the polystyrene foam from household appliances right away, and it moves to the balcony. To prevent valuable material from lying around useless for a long time, try riding on a homemade foam sled. In cold weather they are warm to ride on.

It is enough to cut out a streamlined outline with a sharp knife and punch holes for the rope. Even if these are disposable sleds, they will cost practically nothing.

Another option for free sleds is made from plastic bottles. It is enough to wrap the required amount of empty containers with plastic film, four or six pieces at a time, and put them in a large plastic bag or greenhouse film. Seal the edges with an iron and ride to your health.

Install runners made from a metal corner, plastic pipes or old skis on the stroller, which is possible even without removing the wheels. Riding such a sled from a stroller in winter is much more convenient.

DIY ski sled

Do you have old skis lying around? Don't rush to get rid of them! If they haven’t fallen into disrepair, it’s time to make a pair of sleds from skis with your own hands.

All you need is a little skill and some additional materials. By making a sled from old skis, you can save a lot of money.

What you will need:

actually old skis;
beam or corner for fastening;
board or plastic sheet for sitting;
bolts with nuts and washers;
rope so that the sled can be pulled.

Briefly about the creation of such a sled - a corner is stuffed onto the ski runners, a seat is attached on top, to which a rope is tied.

Types of homemade sleds for snowmobiles

In general terms, a sled is a universal vehicle. There are several types, but they all simply attach to any snowmobile. To decide on a suitable model, you need to take into account a number of factors:

the complexity of the route along which you have to navigate;
thickness and quality of snow cover;
terrain features of the site;
type of cargo transported;
travel distance;
driving style.

Initially, it is worth finding the answers to each item. After this, it will be easier to choose a sled for your snowmobile, and all models are divided into three types:

Volokushi are considered the simplest type of sled. In the factory version, they are often made of plastic and resemble a rectangular trough in shape. The drags do not have skis. While driving, the bottom slips on the snow. The weak point of the drag is considered to be the front part. It is most often destroyed. However, such a product is inexpensive, it is easier to buy it than to make it yourself. The drags are shaped like a rectangular trough, and the bottom is not equipped with skis
Passenger sleds are extremely rare for sale. This is due to low demand. The design is a covered booth mounted on skis or a skid. There is one or more seats for passengers inside. Advanced models have heating and lighting. In such a booth it is convenient to go fishing together or just relax. Most often, passenger sleds for snowmobiles are assembled with their own hands, which significantly reduces the cost of the design. Their main disadvantage is their heavy weight. You can only attach it to a powerful snowmobile. Passenger sleds are convenient for going fishing or relaxing in winter, but they can only be attached to a powerful snowmobile
The cargo sled took all the best qualities from previous varieties. They are more resistant to drag due to the presence of skis. With small dimensions, they are lighter than passenger sleighs, although they can withstand several times more load. Due to the presence of skis, maneuverability and maneuverability on difficult terrain are improved. The main purpose of the sled is to transport goods. However, people can ride them with success. Devices in the form of springs are usually installed between the skis and the bottom of the cargo sled to increase the load capacity.

Difficulties in choosing

First we want to buy sleds, skates and skis. But despite this, there are cases when we cannot buy the corresponding item in a certain store. And all because she seemed ugly and uncomfortable to you.

As they say, there is no comrade for taste and color. But don’t be upset, there is another way to satisfy yourself - doing the thing yourself thanks to your ingenuity. By making it yourself, you can make the thing the way you want.

Sleigh parts

1. High quality and strong base. This is a basic aspect in all motor vehicles. It must be not only beautiful, but also with all the convenience and reliability, otherwise it will break not at the most favorable moment.

2. Strong runners that should slide and turn perfectly.

3. The characteristics of the sled should be in moderation. There is no need to make them completely small, or very large.

Take note! Before you make a sled yourself, think about why you will need it. This could be a sled for your children or, on the contrary, for parents to relax with friends and family. Or they can also serve as a cargo type for transporting firewood, building tools, etc.

Metal sleigh

They are made from aluminum alloy (see aluminum steel pipe). This is a common method that people have been familiar with since childhood. The seat is made of planks painted in rainbow colors, the back and base are painted. Previously, there were heavy alloy sleds such as cast iron and high-quality steel, heavy and unmanageable metal structures. Nowadays, no one uses them anymore, but almost everyone can remember sleds made of aluminum alloy (see Aluminum profile pipes).

We recommend: How to make a homemade manual pipe bender for a profile pipe with your own hands

Wooden sleigh

This is a very ancient version of the invention; before, our distant ancestors could not imagine their life without them. This type of sled was made from good and durable wood, such as oak or beech. They look beautiful, but there is one caveat: they are very heavy and they will serve well in transporting firewood and construction tools.

Air-inflated sled

More recently, in our time, they began to produce sleds of this type, but they are, as a rule, for children. They are very light in weight, the seat is soft, but at the same time they are very uncomfortable and it is impossible to control them; when turning them, they skid and the child falls.

Sled made of plastic

At the beginning of their creation, they looked like a basin or trough. The kids love to ride them, but there is still a caveat: they are unreliable, hard and uncontrollable. You can ride them down a short slide, but they are not suitable for a long journey and large slides.

As a result, we found out that there are many types of sleds. But all that remains is to choose, but it is not so easy. If a child needs a sled, then it is better to choose the most comfortable and safe one. But choosing a product for transporting cargo or for riding professionals is not so easy. Therefore, let’s start making our own sleds using plastic pipes.

Take note! For work, you can use a pipeline that has already been used previously as plumbing, this will allow you to save money. It is very easy to transform such a pipe from old to new by painting.

So let's get to work

How to make a snowmobile sled

Assembling the sled is not that difficult. There are many simple designs that you can create in your garage. It is important to immediately determine their purpose. This will determine what type of sled to assemble for your snowmobile: passenger, cargo or drag.

Tools and materials

The choice of material will depend on the design of the sled. Basically, plywood, boards, and metal profiles are suitable for such work. Skis are made from stainless steel sheets or use thick-walled plastic pipe.

A universal set of tools will help you work with different materials

The list of suitable tools depends on the materials used for the work. However, when assembling a sled, a combination of wood, metal and plastic is often used. It is optimal to have a universal set of tools that allows you to process all materials. From complex equipment, the list must include a welding machine, an angle grinder, an electric drill, and a grinder.

How to make a sled for the farm: some practical tips

The approach to making sleds that we intend to describe, of course, is not the only possible one. Consider our offer as one of the options. But the options are quite reliable and tested in practice.

Tools and materials that may be useful

So, when thinking about how to make a sled with your own hands, stock up on the following tools in advance:

grinder;
hacksaws for wood and metal;
welding machine.

The materials you will need are wood, plastic and metal.

As for wood, you need to select it based on the supporting structure that you want to install on the sled. It could be a simple plywood platform, a lattice platform with low sides, or a box with high sides. There is no difficulty here, so we will not develop this topic further.

Plastic. It is very useful for installation on skids. Thanks to it, the glide will be better and the snow will not stick. This can be a plastic pipe of suitable diameter, loose along the length.

You will need three types of metal:

Pipe for making runners. It is better to take a diameter of at least 50 mm. Otherwise, the sled will fall into the snow.
A corner measuring about 25x25 mm and a square profile of 20x20 mm, which will be needed to create the supporting base of the sled.
Some sheet metal of a reasonable thickness (1-2 mm) to strengthen the corners of the welded joints.

Manufacturing procedure

To make a metal sled with your own hands, you should proceed in the following order:

determine the length of the runners and cut the metal pipe accordingly;
split the pipe in half lengthwise. This will result in two runners;
smoothly bend the front part of the future runners upward, as is usually the case with sleds;
weld two low posts made of a square profile into the recess of the runners (i.e., on their non-working side);

Cut two strips from a metal corner. Their length should be equal to the width of the future sled you have chosen;
The tops of the front and rear pillars, welded to the runners, are connected using prepared strips using welding. Strengthen the corners at the welding points by welding sheet metal gussets there;
also connect the bent ends of the runners with a strap;
cut a piece of plastic pipe equal to the length of the runners. Unfold the cut pipe in half lengthwise;
Rivet the halves of the loose pipe to the runners for better sliding.

Now the economic sleigh is almost ready. All that remains is to paint the metal structure. And then attach a wooden supporting platform made in the method you choose to it.

So, making a sled with your own hands for household needs is not at all difficult. With a little patience and diligence, your versatile vehicle is ready to get to work.

Homemade snowmobile sled made from plastic pipes

Polypropylene or PVC pipes can serve as material for sleds. The design will be lightweight and suitable for any snowmobile. The connection of individual elements is carried out with a soldering iron. The load-carrying capacity of the structure will be small, since the plastic tubes will not withstand heavy loads.

Pipe blanks are cut to size according to the drawing

First you need a drawing. It's simple. The design consists of two curved runners that act as skis. Vertical posts extend from them, which support the main platform.

According to the dimensions of the snowmobile sled indicated on the drawing, blanks are cut from the pipe with your own hands. Prepare shaped elements for soldering. Heat up the soldering iron. From the shaped elements you will need tees and 90° angles. On skis you will need to bend the edges. This can be done by soldering 45° corners. However, the disadvantage of this method is that the soldered fitting has an edge with which the skis can cling to obstacles on the track. You can go another way. Avoid soldering the corners and bend the PVC tubes to the desired angle, after heating them with a hairdryer.

You can give the pipe the desired angle using a hair dryer, heating the area required for bending

After cutting the tubes, begin soldering. First, clean the edges of the workpieces. Nozzles are inserted into the soldering iron. Install the fitting and pipe section. When the plastic softens and begins to melt, the blanks are removed from the hot nozzle and joined together. All elements are collected in a similar way.

The fittings are joined to the pipe using a soldering iron.

The skis are assembled first. They consist of three paired pipes. Tees are soldered at equal intervals along the runners. Racks made of pieces of pipe are attached to the central outlet of the fitting. Their upper end is connected with jumpers using tees and pipes. They form the platform of the future sleigh.

Stands with jumpers are soldered to the runners from pieces of pipes and tees, forming a sleigh platform.

A rectangle is cut out of plywood according to the size of the platform contour. To make the seat soft, the blank is upholstered with an old blanket or foam rubber, and covered with leatherette on top. The platform is secured to the jumpers with overhead clamps or bolts through pre-drilled holes in the tubes.

DIY wooden sled

A home craftsman can weld a metal sled with his own hands, and such a product will be much cheaper than purchased sleds. Welded iron sleds from a corner or from a metal profile left over after construction are a good use for what could have been left in the garage in the “useful” category.

Forged decorative elements made from metal profiles, metal rods left in the artistic forging workshop are better used in business. You can decorate them with snowflakes made of thin wire, and then the Snow Queen herself will envy such sleighs.

You can make a sled from an old cot or bed headboards.

What you will need:

corners for runners and frame;
seat profile;
bolts with nuts and washers for fastening;
rope, preferably not synthetic, so that the sled can be pulled.

You can add a board for sitting, since metal becomes very cold in the cold.

DIY sled on skis for a snowmobile

When a snowmobile is supposed to transport cargo or adults, the sled is made durable and can withstand heavy loads. For cross-country ability they are placed on skis. Good runners will be made from a thick-walled plastic pipe. You will need only 7 m of it. The pipe diameter is 230 mm, the wall thickness is 25 mm. A piece 3 m long is cut off for the skis. The pipe is unraveled lengthwise with a jigsaw or grinder. It turns out two stripes.

From a sawn piece of pipe 3 m long, two runners for skis are obtained

The remaining 4 m of pipes are cut into pieces 1 m long. These will be the jumpers between the runners. Part of the body of each pipe needs to be cut out, and rings left on the sides. They will act as shock absorbers.

The runners are connected by jumpers cut from a similar pipe

The runners are given the curved shape of skis. To do this, the edges of the pipe are heated over a fire and bent to the desired angle. The jumpers are fastened to the runners with furniture bolts, and they are placed with the cutout downwards so that while the sleigh is moving they do not cling to obstacles.

A metal frame with a towbar for a snowmobile is installed on top of the plastic platform.

When the plastic platform is ready, a frame is welded to its size from a profile pipe. It is equipped with jumpers. A towbar is welded at the front for hooking up to the snowmobile. The metal frame is bolted to a plastic platform. To ensure that the curved ends of the skis retain their shape, they are also bolted to the end of the frame. The metal frame is covered with plywood on top. You can lay thin boards.

How to make a fishing sled with your own hands

Anyone can create a winter sled with their own hands. You just need to first select the desired homemade option.

If you are interested in a high-quality transport mechanism for delivering fishing gear in the winter, you can make a wooden, plastic, aluminum or metal sled. It all depends on the materials you have.

Metal sled with runners

This kind of metal sled can be either non-collapsible or foldable. Literally a couple of decades ago, only such units existed. This mechanism has a large load capacity, its design is very rigid and powerful.

In this case, fishing gear can be laid out on a cargo area made of wooden boards, plastic sheets or chipboard.

How to catch more fish?

The negative side of using this kind of winter sled for fishing is their poor movement in snowy areas. The skis are designed to be quite narrow, and with a large thickness of snow this causes inconvenience. Whereas the surface of a reservoir with a low layer of snow or just ice is ideal for moving this unit.

Plastic sled

Plastic sleds, made in the shape of a trough, performed well during fishing. They have frost-resistant characteristics, transport fishing gear through the snow without any interference, and do not cost that much. Everything depends, naturally, on their size and the quality of the base material used.

Although most fishermen advise making their own plastic structures for winter fishing. They claim that it is not difficult.

Wooden sled

A wooden sled will be a good choice for your trek. They will be able to deliver all the gear to the right place without any difficulty and will serve you faithfully for many fishing trips.

Required materials and tools:

boards, preferably pine;
wood glue;
sandpaper;
jigsaw;
drill and more.

Step-by-step instructions for making them:

Take two boards that will later act as runners. Using a compass, draw semicircles on them and cut them out with a jigsaw.
To secure the cross bars, holes are drilled on the runners. It is recommended to connect them using round tenons using the gluing method.
To strengthen the resulting structure, transverse strips on spikes are placed in front and behind the runners.
To make the structure aesthetically attractive, it is necessary to trim off the excess after everything has dried.
Grooves are cut out on the board, which will later act as a seat, and at the site where the tackle box is mounted, for their further connection to the runners.
Bars are also glued to the back of the skis for reinforcement.
At the bottom of the rounding point of the runners, a strip of aluminum or steel is screwed with screws.
Before proceeding with the final assembly of the structure, it is best to examine its individual parts for the accuracy of the connection. Plus, all spare parts are sanded and coated with waterproof varnish.

Cargo homemade sleds for snowmobiles

A special feature of cargo sleds is their resistance to heavy loads. This is achieved by using durable materials, such as metal. Skis are made wide. Due to this, the runners do not fall into the snow. Improves maneuverability and stability when the snowmobile moves at high speed. Shock absorbers are sometimes provided between the runners and the platform frame. They smooth out impacts on bumps. The sled bounces less, which reduces the likelihood of damage or loss of cargo.

Shock absorbers smooth out impacts when riding a snowmobile on uneven terrain, thereby improving cargo safety

The snowmobile sleds shown in the photo are made from metal with your own hands. The platform is covered with plywood. The sides are welded from tubes. They won't interfere with cargo sleds. It is convenient to secure the transported cargo with straps over the sides.

How to make your own snowmobile sled from metal pipes

In general terms, the assembly of metal sleds follows the same principle as in the case of plastic pipes. The only difference is the technology for connecting the workpieces. If plastic was soldered, then in order to make sleds for a snowmobile from steel tubes with your own hands, you will have to weld them.

All elements of the metal sled are welded by electric welding

First, a rectangular frame is welded from the tubes. It consists of racks and a platform. Skis can be bent from a thick-walled plastic pipe or a stainless steel strip with a width of 20 cm or more can be used. The runners are attached to the frame posts. A plywood sheet is laid on the platform. A drawbar is welded to the front of the frame for hooking onto the snowmobile.

How to make a wooden sleigh with your own hands

You can make decorative children's wooden sleds with your own hands from available materials. First you need to create a drawing in which you determine the dimensions of each structural element and the sequence of their installation. Next, each part is made and assembled together. The last stage is burning out patterns and decorating with decorative elements.

Drawing of a wooden sled

First of all, you need to develop a drawing for a wooden sled with your own hands. It is possible to draw up a diagram yourself, since for a basic design it is not difficult. You can also take a ready-made version as a basis.

A drawing of a sled with a back will help in creating the product

The sketch shows the main structural elements:

Sidewall.
Horizontal jumper.
Screws.
Front strap.
Seat bar.
Back strap.
Back.
The plank is longitudinal.
Armrests.
Pen.
Side stand.
Backrest stand.
Holder.
Bracket.

The letters on the diagram indicate:

A – handle hinge;
B – jumper;
B – order of installation of the front strip;
G – handle configuration, order of its fixation.

Making a wooden structure with your own hands begins with runners. To do this, take two identical boards with a thickness of 20 or 40 mm. The drawing needs to be drawn in squares, transferring it onto thick paper or cardboard (it can be easily used as a template). Wooden blanks are cut using a hand router or jigsaw, ensuring the correct movement along the contour.

Then, using chisels, grooves are made for future fastening of transverse wooden lintels. You can also do this yourself - the operation is not very difficult, but it requires care, since the reliability of the structure depends on it. After this, all the wooden elements are collected together and decoration begins. To do this, you can apply a design with your own hands using a burning machine.

Manufacturing of parts

To make parts for children's wooden sleds with your own hands, you need to work out the drawing again and get an accurate idea of the number and parameters of the workpieces. To do this, use a pencil and a ruler.

You can make a wooden sled with handles with your own hands in 1–2 days

Follow these instructions:

The outline of the runners is drawn on the surface of the board.
Using a jigsaw, cut out the first part.
It is placed as a template on a wooden board and outlined with a pencil. The second element is cut out exactly along the contour. The wooden sled runners need to be bent at a certain angle. The optimal option is 120 degrees. Then the sled will confidently cut through the snow and not get caught in it.
Fold both blanks to mark the width of future grooves. Then horizontal slats will be installed in them. You need to make marks with crosses on the surface - these will be the locations of the grooves that should be cut out.
As a result, the wooden runners will have marks like these.
Then, according to the set risks, all the necessary cuts are made with a sharp hacksaw, as shown in the photo.
As a result, you get wooden blanks with your own hands - runners with grooves.
The next stage is to take a strip with a cross-section of 25*40 mm and cut it into 8 identical parts (future diameters). Now you need to start assembling all the parts yourself.

Collecting parts

The parts are connected using self-tapping screws or nails. Accordingly, you need to use a screwdriver or a medium-sized hammer. The sequence of actions is as follows:

Each of the eight parts of the sawn strip is inserted into the finished grooves and secured with a fastener.
All that remains is to make the back. It can be either low (classic model) or high (for easy control by an adult). It is made from the same slats with a cross section of 25*40 mm (length 90 cm).
Two boards are also secured on each side with screws or nails.
For reliability, they are reinforced on the left and right with additional elements, as shown in the photo.
Make 2-3 horizontal crossbars from the same rail. You will get this design.
Next, two round holes are made in the upper part at the same distance.
A cylindrical handle is inserted into them.
If desired, you can attach wooden or metal hooks to the top crossbar to hang a bag, clothes and other items.

Wooden sleds are convenient and reliable to use

Important! If necessary, all parts must be sanded in advance. But if the surface has already been treated, this is not necessary.

Sleigh decoration

The last stage of making a winter children's sleigh from wood with your own hands is decoration and decor. Contrary to popular belief, they should not be painted, since the layer will wear off very quickly and will leave unsightly marks. A more reliable option is to make a drawing with a burning device. You can also stuff wooden figures. If you paint them, you must varnish the top.

Do-it-yourself wooden sled-drag for a snowmobile

It is difficult to make drag sleds from plastic at home. The easiest way to use wood for these purposes. In particular, you will need multilayer plywood and edged boards. To assemble a sled-drag for a snowmobile with your own hands, you don’t need drawings. It is enough to cut a rectangle measuring 3x1 m from plywood. The bottom is formed from it. The edges of the plywood blank are bent and heated in a steam bath.

Wooden drags do not have skis

Skis are not placed on drags. The sled will move through the snow with a plywood bottom. The sides are formed from boards. The plywood is attached to their ends with self-tapping screws. On the inside, the joints are reinforced with overhead metal plates. When finished, the drags resemble a deep wooden trough.

DIY wooden sled: drawings

The most standard material for making sleds is wood. A wooden sled can be made entirely of wood or contain elements woven from vines or branches.

To make the sled smooth and comfortable, you will need drawings. They will be the basis, and you can think of additional elements yourself.

We offer you such a drawing for making children's standard sleds with your own hands.

To decorate a vehicle made according to the drawing, you can cut out several carved elements of the back from plywood with a jigsaw. For strength, it is recommended to make the runners from thicker timber or cover them with sheet metal.

Advice from professionals

Experienced snowmobile owners say that there is no universal sled. In the snowy northern regions, this transport is used to perform various tasks. If you need to frequently transport cargo, want to go on vacation, give rides to guests, it’s best to get several sleds.

In the snowy northern regions, a snowmobile with a sleigh is a popular means of transportation.

The material for the sled is chosen taking into account the terrain on which it is intended to be ridden. Plastic is good for deep snow. To ride over bumps, you need a sled with wide metal skis. Passenger models are equipped with shock absorbers.

When transporting cargo, it is important to stow it correctly to achieve load balance. To protect luggage from getting wet, it is optimal for such transportation to have sleigh boxes.